Date: Tue, 23 Sep 1997 11:36:01 -0700 From: Sri Ramkrishna <sramkris@ichips.intel.com> To: Doug White <dwhite@resnet.uoregon.edu> Cc: questions@freebsd.org Subject: Re: Problem recognizing 3COM Etherlink 3c509B Message-ID: <199709231836.LAA09779@ichips.intel.com> In-Reply-To: Your message of "Mon, 22 Sep 1997 22:05:03 PDT." <Pine.BSF.3.96.970922220426.6177W-100000@gdi.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <Pine.BSF.3.96.970922220426.6177W-100000@gdi.uoregon.edu> you write: > > > > detected 16 <3com blah blah> at 0x200 (repeated 16 times) > > ep0: not found at 0x300 > > > > If I set it to 0x200, it tells me that I should turn off PnP! Even > > though I already did that. > > Are you _sure_ you did? It's acting like it's still enabled. The problem is that the software (etherdisk III) isn't updating the NIC to non-PnP. If I run the config programg, it says I'm not running PnP, yet FreeBSD and Win95 confirms that the card is running in PnP mode. For the life of me, I can't get it to out of PnP mode. <sigh> Any ideas on what I should do? > That is what Win95 does if you use the PnP driver on the 3com. Well the wierd thing is that, I'm using the ISA driver for the card. Win95 gives me driver for the 3c509B with eithr PnP enabled or in ISA mode and both do the same thing. So I'm confused. Like I said FreeBSD and ethernet troubles are hounding me regardless of the card I use. :( sri -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Sriram Ramkrishna | Intel Corporation Unix System Adminstrator | MD-6 Division, Technical Support phone: 503-264-3529 | email: sramkris@ichips.intel.com -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199709231836.LAA09779>