Date: Mon, 10 Jan 2000 15:01:11 +0100 (CET) From: Paul Herman <pherman@piro.net> To: Oren Sarig <sarig@bezeqint.net> Cc: freebsd-isdn@freebsd.org Subject: Re: LCP loop problem fixed Message-ID: <Pine.LNX.4.21.0001101458150.29695-100000@xhost.piro.net> In-Reply-To: <000a01bf5b70$a3183280$0a4119d4@asmodean>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Oren, On Mon, 10 Jan 2000, Oren Sarig wrote: > Well, I figured I might add the debug output I got, so here it > follows. Btw, I checked and I can't access the net yet, pings don't > return a thing :( And my assumption was correct, sppp needs "hisaddr" > it can't get. I don't know if you've tried this yet, but if you are getting dynamic IPs use 0.0.0.1 instead of 10.10.10.10 for his address. Sometimes the other end is OK with rejecting addresses like this, and sometimes not. 0.0.0.1 is "supposed" to work always. Sorry, if that was maybe the 10th time someone suggested this. -Paul. ---------------------------------------------------- PIRONET AG Paul Herman - Consultant - SBU Providing Im Mediapark 5 - 50670 Cologne - Germany Tel.: +49 (0)221 454 3832 - Fax: +49 (0)221 454 3810 mailto:pherman@piro.net - http://www.piro.net/ > Anyways, following is the debug output. > > TIA, > Oren Sarig > sarig@bezeqint.net.il > > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp output <conf-nak id=0x9d > len=10 03- > 06-0a-0a-0a-0a> > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp input(ack-rcvd): > <conf-req > id=0x9e > len=4> > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp parse opts: > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp parse opt values: still > need > hisadd > r send conf-nak > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp output <conf-nak id=0x9e > len=10 03- > 06-0a-0a-0a-0a> > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp input(ack-rcvd): > <conf-req > id=0x9f > len=4> > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp parse opts: > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp parse opt values: still > need > hisadd > r send conf-nak > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp output <conf-nak id=0x9f > len=10 03- > 06-0a-0a-0a-0a> > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp input(ack-rcvd): > <conf-req > id=0xa0 > len=4> > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp parse opts: > Jan 10 15:32:02 asmodean /kernel: isp0: ipcp parse opt values: still > need > hisadd > r send conf-nak > Jan 10 > > > > Well, now that I'm passed the lcp part, I'm in the ipcp part :b. > > > > I can't really check if my connection is working, because I need > some > > IP to ping, and I don't have my DNS servers, so I can't check > domains. > > I'll check that later. But anyways, after the lcp part passes > > painlessly (thanks to Jan here), I get around 10 ipcp messages per > sec > > with the debug option set on for isp0... tcpdump shows this message: > > > > 14:45:50.012088 ID-162 IPCP: IP-Address=10.10.10.10 > > 03a2 000a 0306 0a0a 0a0a > > > > Now, I configures isp0 this way: > > ifconfig isp0 inet 0.0.0.0 10.10.10.10 mtu 500 netmask 255.255.255.0 > > So 10.10.10.10 is the address I gave to my ISP. After I pass the LCP > > part, spppcontrol isp0 shows I am in the "network" stage, and > ifconfig > > isp0 shows "inet (my newly assigned IP) -> 10.10.10.10". Should I > have > > known by this time my ISP's IP too? If not, what cases the 10 > messages > > per sec, or is that normal? > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isdn" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0001101458150.29695-100000>