Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 14 Jul 2009 18:55:26 -0600
From:      Tim Judd <tajudd@gmail.com>
To:        Peter <peterpub2@aboutsupport.com>
Cc:        "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject:   Re: OFFTOPIC: HP DL1xx vs IBM x3250 vs DELL R200
Message-ID:  <ade45ae90907141755ua5ded91k2595feb857851781@mail.gmail.com>
In-Reply-To: <4A5B645C.2090105@aboutsupport.com>
References:  <4A5B645C.2090105@aboutsupport.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 7/13/09, Peter <peterpub2@aboutsupport.com> wrote:
> Hello,
>
> We are about to buy 1U rack mount server for the office. The server room
> is small and close to meeting room so we have two priorities:
>
> 1)Good FreeBSD support.
> 2) Low noise level (!)
>
>
> Speed is not a priority, system load will be small.
>
> Which one will you recommend ?
>
>
>
> HP DL160G5 E5405 2x1GB 2x250GB NHP-SATA CD-DVD Combo 3y
> carepack;Quad-Core Intel(R) Xeon(R) processor E5405 (2.00 GHz, 80W, 1333M=
Hz
> FSB);Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of
> PC2-6400 (DDR2-800) fully buffered DIMMs (DDR2-667) with Advanced ECC;
> Two embedded NC105i PCIe Gigabit Server Adapters;Five USB ports (two
> front, one internal, two rear);650W Power Supply (Non-Hot Plug,
> Autoswitching);Rack (1U)
>
> VS:
>
> IBM x3250 M2 1 x  Xeon Q3330 QuadCore 2.66GHz/1333MHz FSB Hyper
> Threading with EM64T, 6MB Cache, 2x1024MB ECC DDR2, 2 x 250 GB SATA/SAS
> HDD HotSwap, OpenBay Serial Attached SCSI (SAS) Hot Swap, Integrated
> RAID-1, 1x351W, DVD/CD-RW, Dual LAN 10/100/1000, 3 year on-site warranty
>
> VS:
>
> DELL(tm) PowerEdge(tm) R200		1=09
> Quad-Core Intel Xeon Processor X3210 2.13 GHz / 1066 MHz FSB / 8 MB		SAS
> 6/i Integrated RAID Controller Card for SATA and SAS Hard Drives,
> RAID 0,1		=09
> 2GB 800MHz ECC Unbuffered DDR-2 SDRAM		=09
> 2 =C8 250GB, SATA, 3.5-inch, 7.2K RPM Hard Drive (Cabled) 		=09
> Slim DVD/CD-RW Combo Drive		=09
> R200 PCI-E Riser Card (2 x PCI Express slots)		=09
> dual embedded Broadcom(R) Gigabit Ethernet NIC		=09
> Sliding Rack Kit for Dell Racks (Rapid Rails)=09
>
>
> Prices are almost the same :-)
>
> Please recommend.
>
> Thanks in advance.
>
> Peter	=09


I'd recommend looking at any one of the iXsystems -- who is the
organization behind pcbsd.  FreeBSD support is practically guaranteed.


Building your own box is more likely to support naturally and best
option than HP/IBM/Dell if you want complete customization -- but you
or your company may prefer a commercial support option if things go
awry.

Good luck.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ade45ae90907141755ua5ded91k2595feb857851781>