Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 22 Jan 2015 12:00:14 +0100
From:      =?UTF-8?B?TcOkcms=?= Owen <markowen2206@gmail.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: SANE Network Scanner
Message-ID:  <20150122120014.3f3e6d67@MARC-THINKPAD.queenland>
In-Reply-To: <20150121214628.3b42c157@MARC-THINKPAD.queenland>
References:  <20150121214628.3b42c157@MARC-THINKPAD.queenland>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Wed, 21 Jan 2015 21:46:28 +0100
M=C3=A4rk Owen <markowen2206@gmail.com> wrote:

>=20
>=20
> Begin forwarded message:
>=20
> Date: Wed, 21 Jan 2015 20:11:54 +0100
> From: M=C3=A4rk Owen <markowen2206@gmail.com>
> To: Zsolt Udvari <udvzsolt@gmail.com>
> Subject: Re: SANE Network Scanner
>=20
>=20
> On Wed, 21 Jan 2015 19:20:06 +0100
> Zsolt Udvari <udvzsolt@gmail.com> wrote:
>=20
> > Did you enable your client's IP in saned.conf?
> > Check here:
> > https://wiki.archlinux.org/index.php/Sane#Network_scanning I've
> > done it with RPI, and followed ArchWiki - you don't need inetd.
> >=20
> > 2015-01-21 17:51 GMT+01:00 M=C3=A4rk Owen <markowen2206@gmail.com>:
> >=20
> > > Hi,
> > >
> > > I'm trying to share an Epson Perfection 3490 over the network
> > > through SANE. I know it is supported because it worked on linux
> > > (Debian). The host (FreeBSD 10.1) recognizes it and it seems to
> > > work if I invoke this command:
> > >
> > > scanimage -d snapscan:libusb:/dev/usb:/dev/ugen1.3 --format pnm
> > > > /tmp/outfile.pnm
> > >
> > > The issue is that my clients (all Debian 7 boxes) don't seem to be
> > > able to detect the scanner over the network using xsane or the
> > > scanimage -L / sane-find-scanner -q commands.
> > >
> > > Maybe some of you will be able to enlighten me. Here are the
> > > content of a few configuration files from the server:
> > >
> > > /etc/rc.conf
> > >         inetd_enable=3D"YES"
> > >         saned_enable=3D"YES"
> > >
> > > /etc/services
> > >         sane-port       6566/tcp #SANE
> > >
> > > /etc/inetd.conf
> > >         sane-port       stream  tcp     nowait
> > >         saned   /usr/local/sbin/saned   saned
> > >
> > > In /usr/local/etc/sane.d/dll.conf, everything is commented except
> > > 'snapscan' as FreeBSD seems to detect the scanner as snapscan and
> > > not epson.
> > >
> > > /usr/local/etc/sane.d/snapscan.conf
> > > #------------------------------ General
> > > -----------------------------------
> > >
> > > # Change to the fully qualified filename of your firmware file, if
> > > # firmware upload is needed by the scanner
> > > firmware /usr/local/share/sane/snapscan/Esfw52.bin
> > >
> > > # If not automatically found you may manually specify a device
> > > name.
> > >
> > > # For USB scanners also specify bus=3Dusb, e.g.
> > > # /dev/usb/scanner0 bus=3Dusb
> > >
> > > # For SCSI scanners specify the generic device, e.g. /dev/sg0 on
> > > Linux. # /dev/sg0
> > >
> > >
> > > #--------------------------------------------------------------------=
-------
> > > # No changes should be necessary below this line
> > >
> > > #--------------------------------------------------------------------=
-------
> > >
> > > #-------------------------- SCSI scanners
> > > ---------------------------------- # These SCSI devices will be
> > > probed automatically scsi AGFA * Scanner
> > > scsi COLOR * Scanner
> > > scsi Color * Scanner
> > > scsi ACERPERI * Scanner
> > >
> > > #--------------------------- USB scanners
> > > ----------------------------------- # These USB devices will be
> > > probed automatically # (This will currently work only on Linux)
> > >
> > > # Benq/Acer/Vuego 310U
> > > usb 0x04a5 0x1a20
> > > usb 0x04a5 0x1a26
> > >
> > > # Benq/Acer/Vuego 320U
> > > usb 0x04a5 0x2022
> > >
> > > # Benq/Acer/Vuego 620U / 620UT
> > > usb 0x04a5 0x1a2a
> > > usb 0x04a5 0x2040
> > >
> > > # Benq/Acer/Vuego 640U
> > > usb 0x04a5 0x2060
> > >
> > > # Benq/Acer/Vuego 640BU
> > > usb 0x04a5 0x207e
> > >
> > > # Benq/Acer/Vuego 640BT
> > > usb 0x04a5 0x20be
> > >
> > > # Benq/Acer/Vuego 1240U
> > > usb 0x04a5 0x20c0
> > >
> > > # Benq/Acer/Vuego 3300 / 4300
> > > usb 0x04a5 0x20b0
> > >
> > > # Benq/Acer/Vuego 4300
> > > usb 0x04a5 0x20de
> > >
> > > # Benq 5000E / 5000U
> > > usb 0x04a5 0x20f8
> > >
> > > # Benq 5000
> > > usb 0x04a5 0x20fc
> > >
> > > # Benq/Acer 5300
> > > usb 0x04a5 0x20fe
> > >
> > > # Benq 5250C
> > > usb 0x04a5 0x2137
> > >
> > > # Agfa 1236U
> > > usb 0x06bd 0x0002
> > >
> > > # Agfa 1212U
> > > usb 0x06bd 0x0001
> > > usb 0x06bd 0x2061
> > >
> > > # Agfa Snapscan e10
> > > usb 0x06bd 0x2093
> > >
> > > # Agfa Snapscan e20
> > > usb 0x06bd 0x2091
> > >
> > > # Agfa Snapscan e25
> > > usb 0x06bd 0x2095
> > >
> > > # Agfa Snapscan e26
> > > usb 0x06bd 0x2097
> > >
> > > # Agfa Snapscan e40
> > > usb 0x06bd 0x208d
> > >
> > > # Agfa Snapscan e42
> > > usb 0x06bd 0x20ff
> > >
> > > # Agfa Snapscan e50
> > > usb 0x06bd 0x208f
> > >
> > > # Agfa Snapscan e52
> > > usb 0x06bd 0x20fd
> > >
> > > # Epson Perfection 660
> > > usb 0x04b8 0x0114
> > >
> > > # Epson Perfection 1670
> > > usb 0x04b8 0x011f
> > >
> > > # Epson Perfection 2480
> > > usb 0x04b8 0x0121
> > >
> > > # Epson Perfection 3490
> > > usb 0x04b8 0x0122
> > >
> > > # Epson Stylus CX-1500
> > > usb 0x04b8 0x080c
> > > _______________________________________________
> > > freebsd-questions@freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > To unsubscribe, send any mail to "
> > > freebsd-questions-unsubscribe@freebsd.org"
> > >
>=20
> Yes, I did. Here's my saned.conf:
>=20
> # saned.conf
> # Configuration for the saned daemon
>=20
> ## Daemon options
> # Port range for the data connection. Choose a range inside [1024 -
> 65535]. # Avoid specifying too large a range, for performance reasons.
> #
> # ONLY use this if your saned server is sitting behind a firewall. If
> your # firewall is a Linux machine, we strongly recommend using the
> # Netfilter nf_conntrack_sane connection tracking module instead.
> #
> # data_portrange =3D 10000 - 10100
>=20
>=20
> ## Access list
> # A list of host names, IP addresses or IP subnets (CIDR notation)
> that # are permitted to use local SANE devices. IPv6 addresses must be
> enclosed # in brackets, and should always be specified in their
> compressed form. #
> # The hostname matching is not case-sensitive.
>=20
> #scan-client.somedomain.firm
> #192.168.0.1
> 192.168.1.0/24
> #[2001:db8:185e::42:12]
> #[2001:db8:185e::42:12]/64
>=20
> # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and
> # /etc/services must also be properly configured to start
> # the saned daemon as documented in saned(8), services(4)
> # and inetd.conf(4) (or xinetd.conf(5)).

I'm going to answer myself here. I managed to solve my issue, it was in
fact a simple permission problem.

I changed my /etc/devfs.rules files by replacing 'usb' with 'saned':

	[system=3D5]
	add path 'ugen1.3' mode 0660 group saned
	add path 'usb/1.3.*' mode 0660 group saned


As Zsolt said, I removed the inetd service and simply let SANED share
the scanner over the network by itself and it worked.

Thanks for the help.



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?20150122120014.3f3e6d67>