Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 7 Apr 2011 10:32:42 -0400
From:      Carmel <>
To:        FreeBSD <>
Subject:   Re: Linksys-E4200 Wireless N-router
Message-ID:  <BLU0-SMTP20121C52B6CB6F4D37FE7ED93A40@phx.gbl>
In-Reply-To: <>
References:  <BLU0-SMTP822D4E4CF029F1BA9770C993A40@phx.gbl> <>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Thu, 7 Apr 2011 17:00:43 +0300
Odhiambo Washington <> articulated:

> On Thu, Apr 7, 2011 at 15:54, Carmel <> wrote:
> > I was wondering if anyone here has had any experience with a
> > "Linksys-E4200 Wireless N-router"
> > <
> >
> > >?
> >
> > I know that FreeBSD probably does not support its wireless
> > functions as it employs 802.11n wireless technology; however, other
> > than that does anyone have any first hand knowledge of this unit?
> >
> > I have a rather old Linksys "WRT150N Wireless" that I am considering
> > replacing with something more robust.
> >
> > I have a mixture of both Windows and FreeBSD machines. I can use the
> > windows PCs to get the router configured, etcetera and use them and
> > the printer via a wireless connection. The FreeBSD units will have
> > to be connected directly unfortunately.
> >
> >
> Look at
> If you identify a WiFi card on that list and install it on your
> FreeBSD box, then you can connect with wireless!

Odhiambo, please don't CC me. I don't need multiple copies of the same

If you look carefully at that list, which by the way I have done
previously, their are scant few "802.11n" wireless cards listed. The
few that might work appear to be lower end units. I have Linksys
WMP300N units installed in my older PCs. The newer units will have the
Linksys WMP600N installed. They are not listed on the URL listed above.
At least one of my Laptops has a Intel Centrino Wireless-N1030, 1x2 bgn
(2.4GHz) + Bluetooth device installed. I am not even sure if that is
supported, although at the present time I don't require it since it
runs Windows-7.

Carmel ✌

Disclaimer: off-list followups get on-list replies or get ignored.
Please do not ignore the "Reply-To" header.

Want to link to this message? Use this URL: <>