Date: Wed, 10 Jul 1996 09:40:36 +0900 From: Toshihiro Kanda <candy@fct.kgc.co.jp> To: nate@mt.sri.com Cc: questions@freebsd.org Subject: Re: getty(8) don't show `login:' prompt Message-ID: <199607100040.JAA03996@xxx.fct.kgc.co.jp> In-Reply-To: Your message of "Tue, 9 Jul 1996 10:33:28 -0600 (MDT)" References: <199607091633.KAA18396@rocky.mt.sri.com>
next in thread | previous in thread | raw e-mail | index | archive | help
From: Nate Williams <nate@mt.sri.com> Date: Tue, 9 Jul 1996 10:33:28 -0600 (MDT) > > I'm using FreeBSD 2.1R. I wanted to login via modem, but got > > difficulty... Getty didn't show `login:' to remote terminal. > > > > After a short hacking /usr/src/libexec/getty/, I found a delay fixes > > this problem. > > Umm, it worked fine on my box running 2.1R until last week, when I > upgraded to 2.1.5-Alpha, and it still works fine. :) I wonder if my serial chip (on the Intel ZAPPA mother board) was broken :-( There was strange phenomenon: a getty without the deley patch never showed `login:', but if I did `cat /dev/ttyd1' while the getty waiting ttyd1, and I called by a modem, then the getty showed the prompt!! > Are you sure the modem is correctly configured to raise the proper > signals when it answers the phone? Also, try hitting return before > expecting the login prompt. I believe I did it. I configured the modem by the followings. AT&F AT&C1 (DCD signal follows modem CD signal) AT&D3 (Reset when DTR on-to-off transition) ATS0=1 (Auto answer) AT&W (Write parameters) Edited /etc/ttys and /etc/gettytab, then kill(1)'ed -HUP 1. --------- /etc/ttys --------- ttyd1 "/usr/local/sbin/getty std.38400" unknown on insecure --------- /etc/gettytab --------- std.38400|38400-baud:\ :np:sp#38400:im=\r\nUNIX(r) System V Release 4.0 (cusinart)\r\n\r\n: ------------------------------- candy@fct.kgc.co.jp (Toshihiro Kanda)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199607100040.JAA03996>