Date: Thu, 04 Jul 2002 07:25:59 -0700 From: rob <rob@pythonemproject.com> To: Craig Rodrigues <rodrigc@attbi.com>, "stable@freebsd.org" <stable@freebsd.org> Subject: Re: 4.6-STABLE boot fails at "Mounting root from ufs:/dev/md0c" Message-ID: <3D245AF6.C3B3336@pythonemproject.com> References: <20020703221154.A24298@attbi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I think this was my old problem that I fixed from Warner's suggestion. At the bootloader: hw.pcic.intr_path=1 hw.pcic.irq=0 Then put it in /boot/loader.conf Rob. Craig Rodrigues wrote: > > Hi, > > I downloaded the 4.6-STABLE boot floppies, and tried to install > FreeBSD on my new Winbook N3 laptop. The specs for the laptop are at: > > http://www.winbookcorp.com/support/n3/n3_support.html > > The bios is: > > PhoenixBIOS 4.0 Release 6.0 > Copyright 1985-2000 Phoenix Technologies Ltd. > All Rights Reserved > Keyboard BIOS Rev 180A.ROM > 30N3/CY20 BIOS(NB:VIA8603,SB:VIA686B) V1.80A > > When I try to boot, the boot screen hangs at: > "Mounting root from ufs:/dev/md0c" > > This problem seems to be identical to PR 30860: > http://www.FreeBSD.org/cgi/query-pr.cgi?pr=30860 > > One of the solutions in that PR was to set in my BIOS > "Assign IRQ to USB". Unfortunately, my Phoenix BIOS for the Winbook > does not have this option. Is there any way to debug this? > > Just for fun I downloaded the FreeBSD 5.0-DP1 boot floppies, and I > did NOT have this problem, so it seems to be a problem in the 4.6-STABLE > boot sequence. I don't really want to run CURRENT at this time. > > Anyone have any ideas how I can solve this problem with STABLE? > > Thanks. > > Here are some of the boot messages that I could see before they scrolled > off the screen: > > > > =========================================================================== > sa0: unknown card DF@0020 (0x10c00020) at slot 1 > orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xe4000-0xe7fff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model GlidePoint, device ID 0 > vga0: <Generic ISA VGA> at port 0x3c0-03df iomem 0xa000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio2: configured irq 4 not in bitmap of probed irqs 0 > sio09 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 9250 > sio1: configured irq 3 not in bitmap of probed irqs 0 > pppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > plip0: <PLIP network interface> on ppbus0 > ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA100 > acd0: CD-RW <TOSHIBA DVD-ROM SD-R2002> at ata1-master using PIO4 > Mounting root from ufs:/dev/md0c > ( This is where it hangs) > =========================================================================== > -- > Craig Rodrigues > http://www.gis.net/~craigr > rodrigc@attbi.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message -- ----------------------------- The Numeric Python EM Project www.pythonemproject.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D245AF6.C3B3336>