Date: Tue, 31 May 2005 06:37:21 GMT From: Igor Robul <igorr@speechpro.com> To: freebsd-gnats-submit@FreeBSD.org Subject: ports/81697: zaptel cards are UNCONFIGURED without ztcfg command in zaptel.sh Message-ID: <200505310637.j4V6bLtk006516@www.freebsd.org> Resent-Message-ID: <200505310640.j4V6e14S029599@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 81697
>Category: ports
>Synopsis: zaptel cards are UNCONFIGURED without ztcfg command in zaptel.sh
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-ports-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Tue May 31 06:40:01 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator: Igor Robul
>Release: 5.4
>Organization:
>Environment:
>Description:
zaptel port contains drivers for Digium telephone cards. zaptel.sh script loads all needed kernel modules, but cards need to be configured. There is 'ztcfg' command, which configures cards according to settings in /usr/local/etc/zaptel.conf.
Port does not contain example of this file, and ztcfg is not started on boot. So even if you configure card manually, it will not work after reboot, and asterisk PBX will not start too.
>How-To-Repeat:
>Fix:
Add
$LOCALBASE/bin/ztcfg
to /usr/local/etc/rc.d/zaptel.sh.sample
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200505310637.j4V6bLtk006516>