Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Aug 1999 15:14:01 -0700 (PWT)
From:      Matthew Jacob <mjacob@feral.com>
To:        "Stephen C. Comoletti" <stevec@delanet.com>
Cc:        freebsd-scsi@FreeBSD.ORG
Subject:   Re: Problems with 100Base on Qlogic 1040b
Message-ID:  <Pine.LNX.4.04.9908101513000.3597-100000@feral.com>
In-Reply-To: <37B0A329.6A11562E@delanet.com>

next in thread | previous in thread | raw e-mail | index | archive | help

I'm very confused as to why you think this is a SCSI problem. The Qlogic
1040B drives SCSI. 100BaseT is ethernet. Perhaps you've directed this
question to the wrong list?


On Tue, 10 Aug 1999, Stephen C. Comoletti wrote:

> I've recently upgraded to a 100base switch and put all of our main
> servers on it. Some of the servers are running FreeBSD 3.2r with a
> Qlogic 1040b controller on the MB (DEC 300i+ workstations). Problem I am
> having is that they refuse to negotiate at 100base on powerup or reboot.
> I added a 'ifconfig de0 media 100BaseTX' to the rc.conf for them, and
> while I have a green light on the switch, until I ifconfig down, then up
> the interface, it is not active. My 3.1 boxes seem somewhat more
> tollerant to this problem. I've put new cables in to be sure they were
> not an issue.  I also have several MS NT4 machines on the same hardware
> which do not have any problems at all, which leads me to believe it's
> unique to this paticular driver....Are there any updates to this driver
> and/or changes I can make to fix this? Otherwise I'm stuck with a
> machine that is unable to have an unattended reboot or I run at 10Base
> again.
> 
> Please cc me in any replies as I'm not on this list.
> 
> Thanks in advance,
> 
> --
> Stephen Comoletti
> Systems Administrator
> Delanet, Inc.  http://www.delanet.com
> ph: (302) 326-5800 fax: (302) 326-5802
> 
> 
> 
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-scsi" in the body of the message
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.04.9908101513000.3597-100000>