Date: Sat, 5 Feb 2000 10:41:16 -0800 (PST) From: "Brian D. Moffet" <brianm@moffetimages.com> To: gregory_stark@hotmail.com Cc: hardware@freebsd.org, questions@freebsd.org Subject: Re: PnP PCI Modem Message-ID: <200002051841.KAA34831@moffetimages.com> In-Reply-To: <20000205181618.38987.qmail@hotmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> found-> vendor=0x12b9, dev=0x1008, revid=0x01 > class=07-00-02, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 > intpin=a, irq=255 > map[0]: type 4, range 32, base 0000d000, size 3 That is your modem, and according to the PNP stuff, it looks like a 16550, which is good. > device sio0 at isa? port "IO_COM1" tty irq 4 > device sio1 at isa? port "IO_COM2" tty irq 3 The way I did this is to modify the sio drivers to be: device sio1 at isa? port 0xe800 tty irq 3 which required me to hard code the irq to be 3 in the BIOS. In yourcase, the base address you would put in instead of 0xe800 would be 0xd000. My complete sio stuff is: # Serial (COM) ports device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port 0xe800 tty irq 3 device sio2 at isa? port "IO_COM3" tty irq 10 device sio3 at isa? disable port "IO_COM4" tty irq 9 I do not have the PNP stuff enabled. when mine boots, it states: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0xe800-0xe807 irq 3 on eisa slot 14 sio1: type 16550A sio2 at 0x3e8-0x3ef irq 10 on isa sio2: type 16550A I did choose to put my modem on SIO1, and my second serial port on SIO2, but that is up to you. Using hylafax, I can receive faxes on the modem, I have not set it up for dialup or anything, sometime in the near future. Good Luck Brian Moffet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200002051841.KAA34831>