Date: Thu, 2 Dec 2004 07:21:19 GMT From: Brett Wynkoop <wynkoop@wynn.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/74607: FreeBSD 5.3 install CD crashes on SCSI device probe Message-ID: <200412020721.iB27LJUQ050937@www.freebsd.org> Resent-Message-ID: <200412020730.iB27UWLa025009@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 74607 >Category: kern >Synopsis: FreeBSD 5.3 install CD crashes on SCSI device probe >Confidential: no >Severity: critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Dec 02 07:30:32 GMT 2004 >Closed-Date: >Last-Modified: >Originator: Brett Wynkoop >Release: 5.3 Install CD >Organization: Me >Environment: Sorry....No uname output system crashes too soon! >Description: Here is the system configuration from the output of dmesg running on a 5.2.1 LiveCD (frenzy) Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Tue Jul 13 20:45:05 EEST 2004 root@frenzy-build:/usr/obj/usr/src/sys/FRENZY Preloaded elf kernel "/boot/kernel/kernel" at 0xc0cc8000. Preloaded elf module "/boot/kernel/geom_ugz.ko" at 0xc0cc81a4. Preloaded mfs_root "/boot/frenzyroot" at 0xc0cc8254. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium/P55C (167.05-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 268435456 (256 MB) avail memory = 246923264 (235 MB) Intel Pentium detected, installing workaround for F00F bug VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c1bed (c0001bed) VESA: S3 Incorporated. 86C325 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586B UDMA33 controller> port 0x6000-0x600f at device 7.1 on pci 0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <display, VGA> at device 9.0 (no driver attached) orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f 0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 aha1 at port 0x330-0x333 irq 11 drq 5 on isa0 aha1: AHA-1542CF FW Rev. E.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs unknown: <PNP0303> can't assign resources (port) speaker0: <PC speaker> at port 0x61 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 167046522 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to den y, logging unlimited IPsec: Initialized Security Association Processing. md0: Preloaded image </boot/frenzyroot> 1572864 bytes at 0xc0b4636c GEOM: create disk ad0 dp=0xc31de860 ad0: 4924MB <WDC AC25100L> [10672/15/63] at ata0-master UDMA33 acd0: CDRW <PLEXTOR CD-R PX-W1210A> at ata0-slave PIO4 GEOM: create disk ad2 dp=0xc313cc60 ad2: 6149MB <QUANTUM FIREBALL CX6.4A> [13328/15/63] at ata1-master UDMA33 Waiting 15 seconds for SCSI devices to settle aha1: aha_cmd: Timeout waiting for adapter idle aha1: ahafetchtransinfo - Inquire Setup Info Failed 60 GEOM: create disk cd0 dp=0xc3128e00 GEOM: create disk da0 dp=0xc31e8c50 pass2 at aha1 bus 0 target 2 lun 0 pass2: <HP C5110A 3638> Fixed Processor SCSI-2 device pass2: 3.300MB/s transfers cd0 at aha1 bus 0 target 1 lun 0 cd0: <NEC CD-ROM DRIVE:501 2.3> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [305144 x 2048 byte records] da0 at aha1 bus 0 target 0 lun 0 da0: <IBM DDYS-T09170N S80D> Fixed Direct Access SCSI-3 device da0: 5.000MB/s transfers (5.000MHz, offset 8) da0: 8748MB (17916240 512 byte sectors: 64H 32S/T 8748C) Mounting root from ufs:/dev/md0 md1.ugz: 27 x 65536 blocks md2.ugz: 222 x 65536 blocks md3.ugz: 51 x 65536 blocks md4.ugz: 59 x 65536 blocks md5.ugz: 4308 x 130560 blocks On booting the 5.3 release CD the system hangs, then crashes on probes of the SCSI devices. If the HP scanner is powered up it hangs, then crashes there. If the Scanner is off it hangs and crashes at either the SCSI CDROM or the SCSI HDD. System is currently running BSD/OS 4.0Beta1 and has been stable since it was installed many years ago. Neither the 5.2.1 live CD or the 5.3 install CD seem to see the WD8013 ethernet card in the system. The SCSI controller is an AHA1542B. >How-To-Repeat: Try to install 5.3 on a system configured as mine (see dmesg output above). >Fix: I would be looking at kernel code and to see if there was some strange interaction between the AHA SCSI subsystem and the Western Digital network drivers. I suspect the WD not being seen by the install kernel may have something to do with things. I know there was an interaction problem with the WD driver and other things in BSD/OS before I reported it. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412020721.iB27LJUQ050937>