Date: Wed, 22 Mar 2000 18:11:17 +0900 From: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> To: winter@jurai.net Cc: iwasaki@jp.FreeBSD.org, freebsd-stable@FreeBSD.ORG Subject: Re: FIXED --> Thanks! Re: ep0 eeprom failed to come ready... Message-ID: <200003220911.SAA11923@tasogare.imasy.or.jp> In-Reply-To: Your message of "Wed, 22 Mar 2000 03:48:18 -0500 (EST)" <Pine.BSF.4.21.0003220345410.50194-100000@sasami.jurai.net> References: <Pine.BSF.4.21.0003220345410.50194-100000@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
> On Wed, 22 Mar 2000, Mitsuru IWASAKI wrote: > > Certainly. Attached gzip+tar+uuencoded file contains > > dmesg.boot - Output of a verbose boot (w/o ep driver in configuration). > > Could I have this with the ep driver configured? Grrr, It's too difficult because I can't do anything after the messsage even etner DDB or pause screen and back scrolling... > > If `device ep' line is enabled in my configuration, the following > > messages come up and boot procedure seems to stop... > > > > ep0: <3Com 3C509-TPO Etherlink III> at port 0x300-0x30f irq 10 on isa0 > > ep0: eeprom failed to come ready. > > ep0: eeprom failed to come ready. > > ep0: eeprom failed to come ready. > > ep0: eeprom failed to come ready. > > ep0: eeprom failed to come ready. > > ep0: Ethernet address 00:00:00:00:00:00 > > Yep, but I need the output of a verbose boot when you get this error > message. I can get only last 24 lines but prior lines seems to be the same as posted before. EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A mss_detect, busy still set (0xff) ep0: <3Com 3C509-TPO Etherlink III> at port 0x300-0x30f irq 10 on isa0 ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: Ethernet address 00:00:00:00:00:00 Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200003220911.SAA11923>