Date: Sun, 09 Sep 2001 16:35:47 -0400 From: Andrew Lankford <arlankfo@mindspring.com> To: freebsd-ports@FreeBSD.org, mirage9_1999@yahoo.com, freebsd-stable@FreeBSD.org Subject: Problem with either usb mouse and RC-4 or usb mouse and XFree86-4.1 Message-ID: <200109092035.QAA21653@hall.mail.mindspring.net>
next in thread | raw e-mail | index | archive | help
I've been using my three button Kensington USB mouse with
FreeBSD4.3-STABLE, and it has run before on XFree86 4.1 with no
problems. I've just upgraded to RC4 (complete binary install),
recompiled the kernel, and built XFree86 4.1 from ports. Circumstances
have changed.
The problem I'm having seems to appear only in X. Regardless what
window manager I use, response to mouse clicks is either sluggish
or nonexistent. Console (i.e. ttyv0) cut and paste functions work
just fine, so my guess would be that someone recently made some
changes to the the XFree86 4.1 port or... your guess is as good as
mine (and most welcome).
Here's my boot log below, for what it's worth. You'll notice that the kernel has trouble with the uhci1 hub due to some sort of conflict with my modem, but my mouse is the only usb device I've got and is connected to uhci0.
Any ideas? Thanks in advance
Andrew Lankford
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC4 #0: Sun Sep 9 00:28:32 EDT 2001
root@bogushost2:/usr/src/sys/compile/ARL0801
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (737.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 267300864 (261036K bytes)
config> q
avail memory = 257159168 (251132K bytes)
Preloaded elf kernel "kernel" at 0xc0315000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031509c.
Preloaded elf module "vesa.ko" at 0xc03150ec.
Preloaded elf module "green_saver.ko" at 0xc0315188.
Preloaded elf module "snd_es137x.ko" at 0xc031522c.
Preloaded elf module "snd_pcm.ko" at 0xc03152d0.
Preloaded elf module "usb.ko" at 0xc0315370.
Preloaded elf module "ugen.ko" at 0xc031540c.
Preloaded elf module "uhid.ko" at 0xc03154a8.
Preloaded elf module "ums.ko" at 0xc0315544.
Preloaded elf module "md.ko" at 0xc03155e0.
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc02c4282 (1000022)
VESA: Intel(R) 815 Chipset Video BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1310
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 11
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xf6800000-0xf680007f irq 5 at device 12.0 on pci1
xl0: Ethernet address: 00:01:02:73:ee:49
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio0: <3COM PCI FaxModem> port 0xd400-0xd407 irq 9 at device 13.0 on pci1
sio0: type 16550A
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 4 at device 14.0 on pci1
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 3 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: vendor 0x0603 USB Mouse STD. , rev 1.00/1.00, addr 2, iclass 3/1
ums0: 3 buttons
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: Could not allocate irq
device_probe_and_attach: uhci1 attach returned 6
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd07ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc0: cannot reserve I/O port range
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
smb1: <SMBus general purpose I/O> on smbus1
iic0: <I2C general purpose I/O> on iicbus0
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master tagged UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0s3a
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: Could not allocate irq
device_probe_and_attach: uhci1 attach returned 6
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: Could not allocate irq
device_probe_and_attach: uhci1 attach returned 6
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: Could not allocate irq
device_probe_and_attach: uhci1 attach returned 6
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: Could not allocate irq
device_probe_and_attach: uhci1 attach returned 6
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: Could not allocate irq
device_probe_and_attach: uhci1 attach returned 6
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0
uhci1: Could not allocate irq
device_probe_and_attach: uhci1 attach returned 6
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200109092035.QAA21653>