Date: Tue, 10 Oct 2000 11:05:17 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Wilko Bulte <wkb@freebie.demon.nl> Cc: John Baldwin <jhb@FreeBSD.org>, Andrew Gallatin <gallatin@FreeBSD.org>, cvs-all@FreeBSD.org, cvs-committers@FreeBSD.org Subject: Re: cvs commit: src/sys/alpha/alpha ipl_funcs.c Message-ID: <Pine.LNX.4.21.0010101103250.739-100000@zeppo.feral.com> In-Reply-To: <20001010200606.A8244@freebie.demon.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
YMMV mucho...I just had done a clean rebuild/reboot, and my PC164 doesn't come
up but instead I get (below)- slowly getting up. This is fascinating. It's
almost as if the ithread scheduler is really broken and only occasionally
let's a thread run:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sio 0 at to isa (string)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 flags to 80 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting vga 0 at to isa (string)
FreeBSD 5.0-CURRENT #0: Tue Oct 10 09:15:53 PDT 2000
mjacob@farrago.feral.com:/tstsys/compile/FARRAGO
EB164
Digital AlphaPC 164 432 MHz, 432MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=1 extensions=0x1<BWX>
OSF PAL rev: 0x1000800020117
real memory = 265904128 (259672K bytes)
Physical memory chunk(s):
0x006d4000 - 0x0ff0dfff, 260284416 bytes (31773 pages)
avail memory = 252542976 (246624K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00006b4000.
Preloaded elf module "ispfw.ko" at 0xfffffc00006b40c0.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
cia0: <2117x Core Logic chipset>
cia0: ALCOR/ALCOR2, pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: physical bus=0
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 4, range 32, base 00010200, size 8, enabled
map[14]: type 1, range 32, base 82082000, size 12, enabled
found-> vendor=0x1077, dev=0x1080, revid=0x01
bus=0, slot=6, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 4, range 32, base 00010100, size 8, enabled
map[14]: type 1, range 32, base 82081000, size 12, enabled
found-> vendor=0x1077, dev=0x2200, revid=0x05
bus=0, slot=7, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=1
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 82080000, size 12, enabled
found-> vendor=0x8086, dev=0x0484, revid=0x43
bus=0, slot=8, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1011, dev=0x0009, revid=0x22
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 4, range 32, base 00010300, size 7, enabled
map[14]: type 1, range 32, base 82083000, size 7, enabled
found-> vendor=0x1095, dev=0x0646, revid=0x01
bus=0, slot=11, func=0
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[20]: type 4, range 32, base 00010380, size 4, enabled
pci0: <PCI bus> on pcib0
Qlogic ISP Driver, FreeBSD Version 5.4, Core Version 2.0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10200-0x102ff mem 0x82082000-0x82082fff irq 2 at device 5.0 on pci0
isp0: using Memory space register mapping
isp0: interrupting at CIA irq 2
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, loaded F/W Revision 4.65.0
isp0: Last F/W revision was 5.57.1
isp1: <Qlogic ISP 1080 PCI SCSI Adapter> port 0x10100-0x101ff mem 0x82081000-0x82081fff irq 0 at device 6.0 on pci0
isp1: using Memory space register mapping
isp1: interrupting at CIA irq 0
isp1: bus 0 is in LVD Mode
isp1: Board Revision 1080, loaded F/W Revision 8.13.0
isp2: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x10000-0x100ff mem 0x82080000-0x82080fff irq 1 at device 7.0 on pci0
isp2: using Memory space register mapping
isp2: interrupting at CIA irq 1
isp2: Board Revision 2200, loaded F/W Revision 2.1.14
isp2: NVRAM Port WWN 0x210000e08b01ae8b
isab0: <Intel 82378IB PCI to ISA bridge> at device 8.0 on pci0
Bus Modes: Bus Park, Resource Lock,
Configuration RAM: 0C00h,0800h-08FFh
Port 92: enabled
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x1011, dev=0x0009) at 9.0 irq 3
atapci0: <CMD 646 ATA controller> port 0x10380-0x1038f irq 5 at device 11.0 on pci0
atapci0: Busmastering DMA enabled
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x10380
ata0: mask=03 status0=51 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata0: interrupting at ISA irq 14
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x10388
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 433008048 Hz (firmware 432900432 Hz)
i8254 clock: 1192009 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0 failed to probe at irq 7 on isa0
sc0: no video adapter is found.
sc0: <System console> failed to probe on isa0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0
vga0: <Generic ISA VGA> failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
Timecounter "i8254" frequency 1193182 Hz
Timecounter "alpha" frequency 433008048 Hz
bpf: lo0 attached
ata0-master: success setting WDMA2 on CMD chip
ad0: <ST33210A/3.04> ATA-4 disk at ata0-master
ad0: 3098MB (6346368 sectors), 6296 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
Waiting 2 seconds for SCSI devices to settle
isp0: 0.2 get user period 0xc offset 0x8 flags 0xfd00
isp0: 0.2 get current period 0x19 offset 0x0 flags 0xc5c0
isp0: 0.2 set current period 0xc offset 0x8 flags 0xfd00
isp0: 0.9 get user period 0xc offset 0x8 flags 0xfd00
isp0: 0.9 get current period 0x19 offset 0x0 flags 0xc5c0
isp0: 0.9 set current period 0xc offset 0x8 flags 0xfd00
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK da3
Creating DISK da4
Creating DISK da5
Creating DISK da6
Creating DISK da7
Creating DISK da8
Creating DISK da9
Creating DISK da10
Creating DISK da11
Creating DISK da12
Creating DISK da13
Creating DISK da14
Creating DISK da15
Creating DISK da16
Creating DISK da17
Creating DISK da18
Creating DISK da19
pass0 at isp0 bus 0 target 2 lun 0
pass0: <SEAGATE ST34573W 5698> Fixed Direct Access SCSI-2 device
pass0: Serial Number LN164807000018410A1M
isp0: 0.2 get current period 0xc offset 0x8 flags 0xfd00
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at isp0 bus 0 target 9 lun 0
pass1: <SEAGATE ST34371W 0484> Fixed Direct Access SCSI-2 device
pass1: Serial Number HD0522910GP1U1
isp0: 0.9 get current period 0xc offset 0x8 flags 0xfd00
pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass2 at isp2 bus 0 target 0 lun 0
pass2: < > Fixed Direct Access SCSI-0 device
pass2: 100.000MB/s transfers
pass3 at isp2 bus 0 target 0 lun 1
pass3: < > Fixed Direct Access SCSI-0 device
pass3: 100.000MB/s transfers
pass4 at isp2 bus 0 target 0 lun 2
pass4: < > Fixed Direct Access SCSI-0 device
pass4: 100.000MB/s transfers
pass5 at isp2 bus 0 target 0 lun 3
pass5: < > Fixed Direct Access SCSI-0 device
pass5: 100.000MB/s transfers
pass6 at isp2 bus 0 target 0 lun 4
pass6: < > Fixed Direct Access SCSI-0 device
pass6: 100.000MB/s transfers
pass7 at isp2 bus 0 target 0 lun 5
pass7: < > Fixed Direct Access SCSI-0 device
pass7: 100.000MB/s transfers
pass8 at isp2 bus 0 target 0 lun 6
pass8: < > Fixed Direct Access SCSI-0 device
pass8: 100.000MB/s transfers
pass9 at isp2 bus 0 target 0 lun 7
pass9: < > Fixed Direct Access SCSI-0 device
pass9: 100.000MB/s transfers
pass10 at isp2 bus 0 target 16 lun 0
pass10: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass10: Serial Number LP21423900001907191R
pass10: 100.000MB/s transfers, Tagged Queueing Enabled
pass11 at isp2 bus 0 target 17 lun 0
pass11: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass11: Serial Number LP061822000019071808
pass11: 100.000MB/s transfers, Tagged Queueing Enabled
pass12 at isp2 bus 0 target 18 lun 0
pass12: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass12: Serial Number LP159124000019072C69
pass12: 100.000MB/s transfers, Tagged Queueing Enabled
pass13 at isp2 bus 0 target 19 lun 0
pass13: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass13: Serial Number LP178241000019072AX4
pass13: 100.000MB/s transfers, Tagged Queueing Enabled
pass14 at isp2 bus 0 target 20 lun 0
pass14: <SEAGATE ST118273FC 6208> Fixed Direct Access SCSI-2 device
pass14: Serial Number LP16582800001907192A
pass14: 100.000MB/s transfers, Tagged Queueing Enabled
pass15 at isp2 bus 0 target 21 lun 0
pass15: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass15: Serial Number 3AL0A7XP00001952HJN6
pass15: 100.000MB/s transfers, Tagged Queueing Enabled
pass16 at isp2 bus 0 target 22 lun 0
pass16: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass16: Serial Number 3AL0A7T900001952HQSF
pass16: 100.000MB/s transfers, Tagged Queueing Enabled
pass17 at isp2 bus 0 target 23 lun 0
pass17: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass17: Serial Number 3AL0A7W5000019461C4F
pass17: 100.000MB/s transfers, Tagged Queueing Enabled
pass18 at isp2 bus 0 target 24 lun 0
pass18: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass18: Serial Number 3AL0A7Z500001952HKAS
pass18: 100.000MB/s transfers, Tagged Queueing Enabled
pass19 at isp2 bus 0 target 25 lun 0
pass19: <SEAGATE ST39175FC 0001> Fixed Direct Access SCSI-2 device
pass19: Serial Number 3AL0A7XW00001952HJAD
pass19: 100.000MB/s transfers, Tagged Queueing Enabled
da0 at isp0 bus 0 target 2 lun 0
da0: <SEAGATE ST34573W 5698> Fixed Direct Access SCSI-2 device
da0: Serial Number LN164807000018410A1M
isp0: 0.2 get current period 0xc offset 0x8 flags 0xfd00
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da1 at isp0 bus 0 target 9 lun 0
da1: <SEAGATE ST34371W 0484> Fixed Direct Access SCSI-2 device
da1: Serial Number HD0522910GP1U1
isp0: 0.9 get current period 0xc offset 0x8 flags 0xfd00
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe cvs-all" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0010101103250.739-100000>