Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 24 Nov 2009 18:33:00 -0800
From:      Steve Rikli <sr@genyosha.net>
To:        freebsd-sparc64@freebsd.org
Subject:   free Ultra5 in Silicon Valley CA, USA
Message-ID:  <20091125023300.GA56646@dragon.genyosha.net>

next in thread | raw e-mail | index | archive | help

--lrZ03NoBR/3+SXJZ
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

I have an Ultra5 to give away to a good home -- all I ask in return is
repayment for shipping, and local pickups in Silicon Valley CA, USA are
also welcome.

Basic specs are:

  Ultra5, 440MHz CPU, 1GB RAM, 40GB IDE sysdisk, 250GB IDE data disk,
  Ultra5 server disk sled (replaces floppy), CDROM, spare floppy

Note the floppy drive has been removed in favor of the server disk sled
and 2nd IDE disk, but I'll include the floppy just in case you want it
for some reason.

Full dmesg is included below.

I'd prefer not to ship this Ultra5 outside the USA, mostly because the
cost is probably pretty prohibitive.  Still, if someone wants to pay
the extra expense (in $US funds only, please) I'll see what we can
come up with.

Cheers,
sr.
--

--lrZ03NoBR/3+SXJZ
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.ultra5"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0.1 (GENERIC) #0: Wed Oct  8 01:13:20 PDT 2008
        builds@wb32:/home/builds/ab/netbsd-4-0-1-RELEASE/sparc64/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/sparc64/compile/GENERIC
total memory = 1024 MB
avail memory = 991 MB
timecounter: Timecounters tick every 10.000 msec
bootpath: /pci@1f,0/pci@1,1/ide@3/disk@0,0:a
mainbus0 (root): SUNW,Ultra-5_10: hostid 800f19b4
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440 MHz, UPA id 0
cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc4000
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to e0000000
IOTSB: 10c4000 to 1144000
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
ms0 at com1
wsmouse0 at ms0 mux 0
lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: CS4231A
audio0 at audiocs0: full duplex
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:62:60:14
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
machfb0 at pci1 dev 2 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c)
machfb0: 16 MB aperture at 0xe1000000, 4 KB registers at 0xe2000000
machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz
mach64_get_mode: 1152 5304 5432 1528 900 902 938 937
machfb0: initial resolution 1152x864 at 8 bpp
machfb0: attached to /dev/fb0
machfb0: initializing the DSP
wsdisplay1 at machfb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wsdisplay1: screen 0-3 added (default)
cmdide0 at pci1 dev 3 function 0
cmdide0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 440000000 Hz quality 100
No counter-timer -- using %tick at 440MHz as system clock.
wskbd0 at kbd0 mux 1
kbd0: reset failed
wskbd0: connecting to wsdisplay1
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST340016A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CRD-8322B, 1998/09/24, 1.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
wd1 at atabus1 drive 1: <Maxtor 7Y250P0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 233 GB, 486344 cyl, 16 head, 63 sec, 512 bytes/sect x 490234752 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(cmdide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
wd1(cmdide0:1:1): using PIO mode 4, DMA mode 2 (using DMA)
root on wd0a dumps on wd0b
root file system type: ffs

--lrZ03NoBR/3+SXJZ--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091125023300.GA56646>