Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 28 Aug 2012 07:59:56 -0500
From:      Mike A <mikea@mikea.ath.cx>
To:        freebsd-scsi@freebsd.org
Subject:   Bug Report: IBM x3650M4 (32GB, 2x4-core Xeon E5-2600, IBM ServeRaid M5110e): install fails with NMI
Message-ID:  <20120828125956.GA64922@mikea.ath.cx>

next in thread | raw e-mail | index | archive | help
Hi. I'm posting this bug report here at the suggestion of Andriy Gapon, 
of the freebsd-amd64 list.

The machine is, as stated in the Subject header, a shiny new 
IBM x3650M4 (32GB, 2x4-core Xeon E5-2600, IBM ServeRaid M5110e)

I just got handed 4 of the subject boxes with instructions "put 'em to
work". Naturally I tried FreeBSD first, on one of the machines. Boot from
the 9.0 AMD64 boot-only install CD fails. Things look fine until the last
several lines of the (verbose enabled) boot sequence, which (from an
insufficiently-wide phone camera capture) are:

"
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x[lost off right edge of phone]
xc5d00000-0xc5deffff irq 34 at device 0.0 on pci[lost]
mpt0: attempting to allocate 1 MSI vectors (1 su[lost]
msi: routing MSI IRQ 256 to local APIC 0 vector [lost]
mpt0: using IRQ 256 for MSI
mpt0: soft reset failed, device not running
NMI ISA 2c, EISA 0
NMI ... going to debugger
mpt0: hard reset failed
"

after which the firmware reinitializes the system and the sequence starts
over, totally repeatable.

The IBM literature says the RAID adapter is an IBM ServeRaid M5110e, the
RAID configuration firmware calls it a MegaRaid, and FreeBSD identifies it
as an LSILogic SAS/SATA Adapter. I don't know what it really is, but it's
getting in the way and not playing nicely.

I'd really like to add these to the stable, and particularly want to run
them in 64-bit mode; 32-bit just isn't roomy enough. This isn't my first
rodeo.

If this is an appropriate venue, then what do you need from me? What
can I do to help get this set of problems solved? Or have I just got
incompatible, unsupported hardware? If it's not the right venue, then a
(flameless) pointer to the appropriate venue will be greatly appreciated.

Many thanks, from

-- 
Mike Andrews, W5EGO
mikea@mikea.ath.cx
Tired old sysadmin 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120828125956.GA64922>