Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 14 Feb 1999 06:10:48 +0100
From:      "Jon Lech Johansen" <digitech@mmadb.no>
To:        freebsd-isdn@FreeBSD.ORG
Subject:   Asuscom isdn card
Message-ID:  <199902140610.AA40698060@mmadb.no>

next in thread | raw e-mail | index | archive | help
------------------------------------------------------------------------
This mail message contains standard MIME attachments.  If you see this
note, your e-mail program does not support MIME.  You may need a MIME-
compliant mail reader to read any non-text attachments in this message.
------------------------------------------------------------------------

--==IMail_v4.b1==
Content-Type: text/plain; charset=us-ascii

To Martijn Plak (tried sending it directly to you, twice, but I just got it back ;(

from my bootup: 
--- 
Probing for PnP devices: 
CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x0d6d8df3 Comp ID: PNPb02f [0x2fb0d041] 
CSN 2 Vendor ID: ASU1688 [0x88167506] Serial 0x00000044 Comp ID: @@@0000 [0x00000000] 
CSN 2 (Dynalink IS64PH) is disabled. 
--- 

As you can see there (and in the included output from pnpinfo) the pnp id for the asuscom card I have, is the same as the dynalink pnp id. 

from i4b_dynalink.c 
--- 
model numbers found on (my) card: 
IS64PH, TAS100H-N, P/N:89590555, TA200S100045521 

chips: 
Siemens PSB 21525N, HSCX TE V2.1 
Siemens PSB 2186N, ISAC-S TE V1.1 
95MS14, PNP 
--- 

I just took out my card and here's what I have: 

model numbers: P/N 89083509, 80-TA200S100-2 

chips: 
Siemens PSB 21525N, HSCX TE V2.1 
Siemens PSB 2186N, ISAC-S TE V1.1 
95MS14 


To me it looks like these cards are basically the same. The pnp ids are the same. All the same chips exist on both cards... So I don't understand why it doesn't work here ;( 

I'm running FreeBSD 3.0-release, don't know if that matters, shouldn't at least. 
I'm also using the latest i4b available from ftp.consol.de 

If you've got any suggestions, please let me know. 
I'd appreciate anything. 

I'm going to try to install freebsd on another machine and try. Thought it might be something strange with my system config. Well, we'll see.

- Jon

--==IMail_v4.b1==
Content-Type: text/plain; name="pnpinfo.txt"
Content-Transfer-Encoding: binary

Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID CTL00c5 (0xc5008c0e), Serial Number 0x0d6d8df3
PnP Version 1.0, Vendor Version 16
Device Description: Creative SB AWE64 PnP
*** Small Vendor Tag Detected

Logical Device ID: CTL0045 0x45008c0e #0
Device Description: Audio
TAG Start DF
Good Configuration
    IRQ: 5  - only one type (true/edge)
    DMA: channel(s) 1 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
	[16-bit addr]
    I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
TAG Start DF
Sub-optimal Configuration
    IRQ: 5 7 9 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
	8-bit, not a bus master, count by byte, , Compatibility mode
    DMA: channel(s) 5 6 7 
	16-bit, not a bus master, , count by word, Compatibility mode
    I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
	[16-bit addr]
    I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2
	[16-bit addr]
    I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4
	[16-bit addr]
TAG End DF

Logical Device ID: CTL7002 0x02708c0e #1
Compatible Device ID: PNPb02f (2fb0d041)
Device Description: Game
TAG Start DF
Good Configuration
    I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x200 .. 0x208, alignment 0x8, len 0x8
	[16-bit addr]
TAG End DF

Logical Device ID: CTL0022 0x22008c0e #2
Device Description: WaveTable
TAG Start DF
Good Configuration
    I/O Range 0x620 .. 0x620, alignment 0x1, len 0x4
	[16-bit addr]
TAG Start DF
Acceptable Configuration
    I/O Range 0x620 .. 0x680, alignment 0x20, len 0x4
	[16-bit addr]
TAG End DF
*** Small Vendor Tag Detected
End Tag

Successfully got 69 resources, 3 logical fdevs
-- card select # 0x0001

CSN CTL00c5 (0xc5008c0e), Serial Number 0x0d6d8df3

Logical device #0
IO:  0x0220 0x0330 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 5 0
DMA 1 5
IO range check 0x00 activate 0x01

Logical device #1
IO:  0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01

Logical device #2
IO:  0x0620 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01

Card assigned CSN #2
Vendor ID ASU1688 (0x88167506), Serial Number 0x00000044
PnP Version 1.0, Vendor Version 0
Device Description: ISDN CARD ....

Logical Device ID: ASU1688 0x88167506 #0
	Device supports I/O Range Check
    I/O Range 0x100 .. 0x3f8, alignment 0x4, len 0x4
	[not 16-bit addr]
    IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive
    IRQ:  - only one type (true/edge)
End Tag

Successfully got 6 resources, 1 logical fdevs
-- card select # 0x0002

CSN ASU1688 (0x88167506), Serial Number 0x00000044

Logical device #0
IO:  0x0100 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 11 0
DMA 4 0
IO range check 0x00 activate 0x00


--==IMail_v4.b1==--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902140610.AA40698060>