Date: Thu, 23 May 2013 09:37:02 +0200 From: Hans Petter Selasky <hps@bitfrost.no> To: Cyrille Duret <cduret@gmail.com> Cc: freebsd-usb@freebsd.org Subject: Re: Force USB2 controller to use USB1 for virtualbox usage Message-ID: <519DC71E.6000805@bitfrost.no> In-Reply-To: <CALk5yVdSPVM7FWH5fUMtVUgJ5wX3wd%2BXDthbMKW-cDeGE74xcg@mail.gmail.com> References: <CALk5yVdSPVM7FWH5fUMtVUgJ5wX3wd%2BXDthbMKW-cDeGE74xcg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 05/23/13 08:41, Cyrille Duret wrote: > Hello all, > > I try to change my USB 2.0 devices (USB stick, Android phone) to USB 1.1 in > order to use it with VirtualBox running Windows seven 64. > > I see some hints on the web but had no success with the sysctl > hw.usb.ehci.no_hs. > -> http://www.clearchain.com/blog/posts...usb2-0-devices > > > I put this command in /etc/sysctl.conf: > > hw.usb.ehci.no_hs=1 > My USB device works but it is still in HIGH speed. > > > @ sudoi sysctl hw.usb.ehci.no_hs > hw.usb.ehci.no_hs: 1 > > @ sudoi usbconfig > ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE > ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=SAVE > ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE > ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=SAVE > ugen1.3: <Cruzer SanDisk> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON > My device speed is still HIGH and cannot see it to FULL. > > Any experiences? > Thanks. > > My config: > FreeBSD darkstar 9.1-STABLE FreeBSD 9.1-STABLE #2: Thu Jan 31 20:41:22 CET > 2013 root@darkstar:/usr/obj/usr/src/sys/THINKPKERNEL amd64 > >>From pciconf -> > > ehci0@pci0:0:26:0: class=0x0c0320 card=0x21d217aa chip=0x1c2d8086 > rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = '6 Series/C200 Series Chipset Family USB Enhanced Host > Controller' > class = serial bus > subclass = USB > > > ehci1@pci0:0:29:0: class=0x0c0320 card=0x21d217aa chip=0x1c268086 > rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = '6 Series/C200 Series Chipset Family USB Enhanced Host > Controller' > class = serial bus > subclass = USB > > > none2@pci0:13:0:0: class=0x0c0330 card=0x21d217aa chip=0x01941033 > rev=0x04 hdr=0x00 > vendor = 'NEC Corporation' > device = 'uPD720200 USB 3.0 Host Controller' > class = serial bus > subclass = USB > >>From /var/log/messages: > > kernel: ehci0: <EHCI (generic) USB 2.0 controller> mem > 0xf432a000-0xf432a3ff irq 16 at device 26.0 on pci0 > kernel: usbus0: EHCI version 1.0 > kernel: usbus0 on ehci0 > kernel: ehci1: <EHCI (generic) USB 2.0 controller> mem > 0xf4329000-0xf43293ff irq 23 at device 29.0 on pci0 > kernel: usbus1: EHCI version 1.0 > kernel: usbus1 on ehci1 > kernel: usbus0: 480Mbps High Speed USB v2.0 > kernel: usbus1: 480Mbps High Speed USB v2.0 > kernel: ugen0.1: <Intel> at usbus0 > kernel: uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > usbus0 > kernel: ugen1.1: <Intel> at usbus1 > kernel: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > usbus1 > kernel: Root mount waiting for: usbus1 usbus0 > kernel: Root mount waiting for: usbus1 usbus0 > kernel: uhub0: 3 ports with 3 removable, self powered > kernel: uhub1: 3 ports with 3 removable, self powered > > > -- If I put hw.usb.ehci.no_hs=1 in /boot/loader.conf the following lines > does not appear in /var/log/messages: Hi, What does usbconfig say in the latter case? Can you show output from pciconf -lv --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?519DC71E.6000805>