Date: Fri, 10 Jan 1997 20:56:11 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: Stefan Esser <se@freebsd.org> Cc: hackers@freebsd.org Subject: Re: ncr probe FAILS on 2.2-BETA_A! Message-ID: <Pine.BSI.3.94.970110204727.245A-100000@localhost> In-Reply-To: <Mutt.19970110235929.se@x14.mi.uni-koeln.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 10 Jan 1997, Stefan Esser wrote: > > > Perhaps you want to try booting with PCI options (write > > > buffers, PCI burst mode) disabled. > > > > I can try that. There is one thing I did change and that was I upgraded > > the CPU from a 90 to a 133, but the motherboard only does 100MHz, so it's > > running underclocked at the moment. > > Hmmm, that might cause problems, anyway. > Could you check with the old CPU, whether > the problem still exists ? Tried it with the burst and post mode disabled and the P90, no dice. > > > Please try the applied patch. If it doesn't work, then > > > send boot -v messages. If you have access to the CVS > > > tree, you may want to use the driver from 2.2-ALPHA. I > > > can send you a context diff, if you prefer that ... > > > > Unfortunately, this is on the boot.flp and I'm not at all set up to > > rebuild the system....:( > > Ok, I understand this. But send verbose boot > messages from FreeBSD-ALPHA, at least. I need > to know your system configuration, or I won't > know, whether any part that I modified between > ALPHA and BETA might be the culprit ... boot -v output for -ALPHA follows. This SiS board's bridge chips probe up a whole bunch so it doesn't show the whole boot sequence in the syslog, I'll paste on the basics above it. Let me know if you need anything else. Jan 10 00:25:42 gdi /kernel.GUS: FreeBSD 2.2-ALPHA #0: Wed Dec 11 14:08:40 PST 1996 Jan 10 00:25:43 gdi /kernel.GUS: dwhite@gdi.uoregon.edu:/usr/src/sys/compile/GDI Jan 10 00:25:43 gdi /kernel.GUS: Calibrating clock(s) relative to mc146818A clock ... i586 clock: 100006457 Hz, i8254 clock: 1193655 Hz Jan 10 00:25:43 gdi /kernel.GUS: CPU: Pentium (99.97-MHz 586-class CPU) Jan 10 00:25:43 gdi /kernel.GUS: Origin = "GenuineIntel" Id = 0x52c Stepping=12 Jan 10 00:25:43 gdi /kernel.GUS: Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> Jan 10 00:25:43 gdi /kernel.GUS: real memory = 33554432 (32768K bytes) Jan 10 00:25:43 gdi /kernel.GUS: avail memory = 30416896 (29704K bytes) Jan 10 00:25:43 gdi /kernel.GUS: Probing for devices on PCI bus 0: Jan 10 00:25:43 gdi /kernel.GUS: chip0 <SiS 85c501> rev 57 on pci0:0:0 Jan 10 00:25:43 gdi /kernel.GUS: chip1 <SiS 85c501> rev 57 int a irq 60 on pci0:0:1 Jan 10 00:25:43 gdi /kernel.GUS: chip2 <SiS 85c501> rev 57 int b irq 60 on pci0:0:2 Jan 10 00:25:43 gdi /kernel.GUS: chip3 <SiS 85c501> rev 57 int c irq 60 on pci0:0:3 - visual boot info starts here - Jan 10 20:14:14 gdi /kernel.GUS: Jan 10 20:14:14 gdi /kernel.GUS: mapreg[18] type=0 addr=80000310 size=7ffffcf0. Jan 10 20:14:14 gdi /kernel.GUS: mapreg[1c] type=4 addr=80000310 size=7ffffcf0. Jan 10 20:14:14 gdi /kernel.GUS: mapreg[20] type=0 addr=80000320 size=7ffffce0. Jan 10 20:14:14 gdi /kernel.GUS: mapreg[24] type=4 addr=80000320 size=7ffffce0. Jan 10 20:14:14 gdi /kernel.GUS: chip4 <SiS 85c501> rev 57 int d irq 60 on pci0:0:4 Jan 10 20:14:14 gdi /kernel.GUS: mapreg[10] type=0 addr=80000410 size=7ffffbf0. Jan 10 20:14:14 gdi /kernel.GUS: mapreg[14] type=4 addr=80000410 size=7ffffbf0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[18] type=0 addr=80000410 size=7ffffbf0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[1c] type=4 addr=80000410 size=7ffffbf0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[20] type=0 addr=80000420 size=7ffffbe0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[24] type=4 addr=80000420 size=7ffffbe0. Jan 10 20:14:15 gdi /kernel.GUS: chip5 <SiS 85c501> rev 57 int e irq 60 on pci0:0:5 Jan 10 20:14:15 gdi /kernel.GUS: mapreg[10] type=0 addr=80000510 size=7ffffaf0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[14] type=4 addr=80000510 size=7ffffaf0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[18] type=0 addr=80000510 size=7ffffaf0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[1c] type=4 addr=80000510 size=7ffffaf0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[20] type=0 addr=80000520 size=7ffffae0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[24] type=4 addr=80000520 size=7ffffae0. Jan 10 20:14:15 gdi /kernel.GUS: chip6 <SiS 85c501> rev 57 int f irq 60 on pci0:0:6 Jan 10 20:14:15 gdi /kernel.GUS: mapreg[10] type=0 addr=80000610 size=7ffff9f0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[14] type=4 addr=80000610 size=7ffff9f0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[18] type=0 addr=80000610 size=7ffff9f0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[1c] type=4 addr=80000610 size=7ffff9f0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[20] type=0 addr=80000620 size=7ffff9e0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[24] type=4 addr=80000620 size=7ffff9e0. Jan 10 20:14:15 gdi /kernel.GUS: chip7 <SiS 85c501> rev 57 int g irq 60 on pci0:0:7 Jan 10 20:14:15 gdi /kernel.GUS: mapreg[10] type=0 addr=80000710 size=7ffff8f0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[14] type=4 addr=80000710 size=7ffff8f0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[18] type=0 addr=80000710 size=7ffff8f0. Jan 10 20:14:15 gdi /kernel.GUS: mapreg[1c] type=4 addr=80000710 size=7ffff8f0. Jan 10 20:14:16 gdi /kernel.GUS: mapreg[20] type=0 addr=80000720 size=7ffff8e0. Jan 10 20:14:16 gdi /kernel.GUS: mapreg[24] type=4 addr=80000720 size=7ffff8e0. Jan 10 20:14:16 gdi /kernel.GUS: chip8 <SiS 85c503> rev 0 on pci0:1 Jan 10 20:14:16 gdi /kernel.GUS: pci0:12: CMD, device=0x0640, class=storage (ide) int a irq 14 [no driver assigned] Jan 10 20:14:16 gdi /kernel.GUS: ncr0 <ncr 53c815 scsi> rev 3 int a irq 11 on pci0:13 Jan 10 20:14:16 gdi /kernel.GUS: mapreg[10] type=1 addr=00004000 size=0100. Jan 10 20:14:16 gdi /kernel.GUS: mapreg[14] type=0 addr=81000000 size=0100. Jan 10 20:14:16 gdi /kernel.GUS: reg20: virtual=0xf5ff7000 physical=0x81000000 size=0x100 Jan 10 20:14:16 gdi /kernel.GUS: ncr0: restart (scsi reset). Jan 10 20:14:16 gdi /kernel.GUS: ncr0 scanning for targets 0..6 (V2 pl23 95/09/07) Jan 10 20:14:16 gdi /kernel.GUS: ncr0 waiting for scsi devices to settle Jan 10 20:14:16 gdi /kernel.GUS: (ncr0:3:0): "PLEXTOR CD-ROM PX-4XCE 1.00" type 5 removable SCSI 2 Jan 10 20:14:16 gdi /kernel.GUS: cd0(ncr0:3:0): CD-ROM Jan 10 20:14:16 gdi /kernel.GUS: cd0(ncr0:3:0): FAST SCSI-2 175ns (6 Mb/sec) offset 8. Jan 10 20:14:16 gdi /kernel.GUS: cd present [268501 x 2048 byte records] Jan 10 20:14:16 gdi /kernel.GUS: (ncr0:4:0): "SONY CD-ROM CDU-76S 1.1c" type 5 removable SCSI 2 Jan 10 20:14:16 gdi /kernel.GUS: cd1(ncr0:4:0): CD-ROM Jan 10 20:14:16 gdi /kernel.GUS: cd1(ncr0:4:0): 200ns (5 Mb/sec) offset 8. Jan 10 20:14:16 gdi /kernel.GUS: Jan 10 20:14:16 gdi /kernel.GUS: cd1(ncr0:4:0): UNIT ATTENTION asc:28,0 Jan 10 20:14:16 gdi /kernel.GUS: cd1(ncr0:4:0): Not ready to ready transition, medium may have changed Jan 10 20:14:16 gdi /kernel.GUS: cd present [400000 x 2048 byte records] Jan 10 20:14:17 gdi /kernel.GUS: vga0 <VGA-compatible display device> rev 3 on pci0:15 Jan 10 20:14:17 gdi /kernel.GUS: mapreg[10] type=0 addr=80000000 size=1000000. Jan 10 20:14:17 gdi /kernel.GUS: pci0: uses 16733440 bytes of memory from 80000000 upto ffffffff. Jan 10 20:14:17 gdi /kernel.GUS: pci0: uses 256 bytes of I/O space from 4000 upto 40ff. Jan 10 20:14:17 gdi /kernel.GUS: Probing for devices on the ISA bus: Jan 10 20:14:17 gdi /kernel.GUS: sc0 at 0x60-0x6f irq 1 on motherboard Jan 10 20:14:17 gdi /kernel.GUS: sc0: VGA color <16 virtual consoles, flags=0x0> Jan 10 20:14:17 gdi /kernel.GUS: ed0 at 0x300-0x31f irq 10 on isa Jan 10 20:14:17 gdi /kernel.GUS: ed0: address 00:c0:d1:08:08:17, type NE2000 (16 bit) Jan 10 20:14:17 gdi /kernel.GUS: bpf: ed0 attached Jan 10 20:14:17 gdi /kernel.GUS: sio0 at 0x3f8-0x3ff irq 4 on isa Jan 10 20:14:17 gdi /kernel.GUS: sio0: type 16550A Jan 10 20:14:17 gdi /kernel.GUS: sio1 at 0x2f8-0x2ff irq 3 on isa Jan 10 20:14:17 gdi /kernel.GUS: sio1: type 16550A Jan 10 20:14:17 gdi /kernel.GUS: lpt1 at 0x278-0x27f on isa Jan 10 20:14:17 gdi /kernel.GUS: qcam0 at 0x378 irq 7 flags 0x1 on isa Jan 10 20:14:17 gdi /kernel.GUS: qcam0: unidirectional parallel port Jan 10 20:14:17 gdi /kernel.GUS: fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa Jan 10 20:14:17 gdi /kernel.GUS: fdc0: NEC 72065B Jan 10 20:14:17 gdi /kernel.GUS: fd0: 1.44MB 3.5in Jan 10 20:14:17 gdi /kernel.GUS: wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa Jan 10 20:14:17 gdi /kernel.GUS: wdc0: unit 0 (wd0): <WDC AC31000F>, multi-block-16 Jan 10 20:14:18 gdi /kernel.GUS: wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S Jan 10 20:14:18 gdi /kernel.GUS: wdc0: unit 1 (wd1): <Maxtor 7540 AV>, multi-block-8 Jan 10 20:14:18 gdi /kernel.GUS: wd1: 514MB (1054368 sectors), 1046 cyls, 16 heads, 63 S/T, 512 B/S Jan 10 20:14:18 gdi /kernel.GUS: wdc1 not found at 0x170 Jan 10 20:14:18 gdi /kernel.GUS: npx0 on motherboard Jan 10 20:14:18 gdi /kernel.GUS: npx0: INT 16 interface Jan 10 20:14:18 gdi /kernel.GUS: Checking for GUS Plug-n-Play ... Jan 10 20:14:18 gdi /kernel.GUS: Board Vendor ID: GRV0001 Board Serial Number: ffffffff Jan 10 20:14:18 gdi /kernel.GUS: gus0 at 0x240 irq 12 drq 1 flags 0x3 on isa Jan 10 20:14:18 gdi /kernel.GUS: GUS PNP (CS4231)> at 0x34c dma 3,1 Jan 10 20:14:18 gdi /kernel.GUS: Gravis PNP (1024k)> at 0x240 irq 12 dma 1,3 Jan 10 20:14:18 gdi /kernel.GUS: Jan 10 20:14:18 gdi /kernel.GUS: imasks: bio c0004840, tty c003049a, net c003049a Jan 10 20:14:18 gdi /kernel.GUS: Device configuration finished. Jan 10 20:14:18 gdi /kernel.GUS: Considering FFS root f/s. Jan 10 20:14:18 gdi /kernel.GUS: changing root device to wd0a Jan 10 20:14:18 gdi /kernel.GUS: configure() finished. Jan 10 20:14:18 gdi /kernel.GUS: bpf: tun0 attached Jan 10 20:14:19 gdi /kernel.GUS: bpf: sl0 attached Jan 10 20:14:19 gdi /kernel.GUS: bpf: lo0 attached Jan 10 20:14:19 gdi /kernel.GUS: wd0s1: type 0xa5, start 63, end = 2108735, size 2108673 : OK Jan 10 20:14:19 gdi /kernel.GUS: wd0s3: type 0xa, start 2108736, end = 2112767, size 4032 : OK Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.94.970110204727.245A-100000>