Date: Thu, 17 Dec 2009 23:19:53 -0800 From: Gary Kline <kline@thought.org> To: FreeBSD Mailing List <freebsd-questions@FreeBSD.ORG> Subject: help, plesae check everything you can... Message-ID: <20091218071951.GA1687@thought.org>
next in thread | raw e-mail | index | archive | help
if this gets thru, i hope some of you can help me. i was trying to correct the couple things mentioned and all of a sudden i broke something in /etc/namedb/; then i seemed to fix it, one minute wife and daughter cannot get outside; then next time they can. there are some error from ethic that i do not understand. i'm appending out out from dmesg. hopefully some of you can give me some clues. thanks, gary PS: my internext connections are extremely slow. when things Do work; then then time-out. i'm stumped. -- Gary Kline kline@thought.org http://www.thought.org Public Service Unix Attached 'dmesg' from ethic.thought.org Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE-p4 #2: Sat Nov 21 05:52:04 PST 2009 root@ethic.thought.org:/usr/obj/usr/src/sys/ETHIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (2793.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 3478716416 (3317 MB) avail memory = 3399557120 (3242 MB) ACPI APIC Table: <DELL FX09 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <DELL FX09 > on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cf490000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfdb00000-0xfdbfffff irq 16 at device 2.0 on pci0 agp0: <Intel G33 SVGA controller> on vgapci0 agp0: detected 7164k stolen memory agp0: aperture size is 256M em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xfe00-0xfe1f mem 0xfdfc0000-0xfdfdffff,0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:24:e8:17:88:61 uhci0: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 26.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered pci0: <multimedia, HDA> at device 27.0 (no driver attached) uhci3: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 23 at device 29.0 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xf900-0xf91f irq 19 at device 29.1 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0xf800-0xf81f irq 18 at device 29.2 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 6 ports with 6 removable, self powered umass0: <TEAC CA-200, class 0/0, rev 2.00/4.08, addr 2> on uhub7 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH9 SATA300 controller> port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf30f,0xf200-0xf20f irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel ICH9 SATA300 controller> port 0xf000-0xf007,0xef00-0xef03,0xee00-0xee07,0xed00-0xed03,0xec00-0xec0f,0xeb00-0xeb0f irq 19 at device 31.5 on pci0 atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6164a2306004a23 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6164a2306004a23 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 pmtimer0 on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: <vendor 0x0d3d USBPS2, class 0/0, rev 1.10/0.01, addr 2> on uhub1 kbd2 at ukbd0 ums0: <vendor 0x0d3d USBPS2, class 0/0, rev 1.10/0.01, addr 2> on uhub1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA5BA> at ata2-master SATA300 GEOM_LABEL: Label for provider ad4s1 is ufsid/4b047bd37d66bcd3. GEOM_LABEL: Label for provider ad4s2 is ufsid/4b047bdffc933b67. GEOM_LABEL: Label for provider ad4s4 is ufsid/4b047bd775058e20. (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition (probe0:umass-sim0:0:0:1): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:1): Medium not present (probe0:umass-sim0:0:0:1): Unretryable error (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition (probe0:umass-sim0:0:0:2): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:2): Medium not present (probe0:umass-sim0:0:0:2): Unretryable error (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition (probe0:umass-sim0:0:0:3): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:3): Medium not present (probe0:umass-sim0:0:0:3): Unretryable error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <TEAC USB HS-CF Card 4.08> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <TEAC USB HS-xD/SM 4.08> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <TEAC USB HS-MS Card 4.08> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <TEAC USB HS-SD Card 4.08> Removable Direct Access SCSI-0 device da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present acd0: DVDR <Optiarc DVD+/-RW AD-7200S/102A> at ata3-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a GEOM_LABEL: Label ufsid/4b047bd37d66bcd3 removed. GEOM_LABEL: Label for provider ad4s1 is ufsid/4b047bd37d66bcd3. GEOM_LABEL: Label ufsid/4b047bd775058e20 removed. GEOM_LABEL: Label for provider ad4s4 is ufsid/4b047bd775058e20. GEOM_LABEL: Label ufsid/4b047bdffc933b67 removed. GEOM_LABEL: Label for provider ad4s2 is ufsid/4b047bdffc933b67. GEOM_LABEL: Label ufsid/4b047bd37d66bcd3 removed. GEOM_LABEL: Label ufsid/4b047bd775058e20 removed. GEOM_LABEL: Label ufsid/4b047bdffc933b67 removed.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091218071951.GA1687>