Date: Tue, 07 Nov 2006 10:09:18 -0500 From: Lowell Gilbert <freebsd-questions-local@be-well.ilk.org> To: "Mark Maddox" <MMaddox@TMCDesign.com> Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 6.1 Installation problem Message-ID: <447iy7mgyp.fsf@be-well.ilk.org> In-Reply-To: <CE568152976C2A4BADD08770B6360E8A01D78776@tmcsvr.tmcdesign.local> (Mark Maddox's message of "Mon, 6 Nov 2006 10:54:24 -0700") References: <CE568152976C2A4BADD08770B6360E8A01D78776@tmcsvr.tmcdesign.local>
next in thread | previous in thread | raw e-mail | index | archive | help
"Mark Maddox" <MMaddox@TMCDesign.com> writes: > I have an onboard Intel ICH7-M SATA controller with an SATA hard drive > and cdrom connected to it. I am unable to install FreeBSD onto the > harddrive. > > > > According to the FreeBSD website ICH7 has been supported since version > 6.0 > > I have tried putting the controller in Legacy Mode and tried turning > turned DMA off in on boot. I have tested both of my SATA ports on the > motherboard to make sure they both work with an alternate operating > system (Windows) and they both worked. > > > > I have also installed the harddrive in another computer and installed > FreeBSD on it successfully and then (after testing it and booting > successfully on that computer) put it in the machine I am having the > problems with only to have it start booting and then error out with > harddrive errors. > > > > During boot I get this error: > > ad0: FAILURE -READ_DMA48 status=ff<BUSY, > READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=390721967 > > > > > > During install the error I get is Error mounting /mnt/dev/ad0s1e on > /mnt/tmp : Input/output error > > > > ad0: FAILURE - READ_DMA status=ff<BUSY,READY, > DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0 LBA=9303631 > > > > Anyone have any ideas? Sounds like controller problems. I'd start by replacing the SATA cable.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?447iy7mgyp.fsf>