Date: Tue, 08 Aug 2006 13:35:32 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-mobile@freebsd.org Subject: Re: Acer Aspire AS5672 laptop and FreeBSD 7.0-current (July snapshot) Message-ID: <20060808133532.034238c5.torfinn.ingolfsen@broadpark.no> In-Reply-To: <20060801212218.e0c9f1c7.torfinn.ingolfsen@broadpark.no> References: <20060801212218.e0c9f1c7.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--Boundary_(ID_Ne5gcTb/YJRoW08zgdoMTw)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Hello,
More data - i managed to boot an OpenBSD liveDVD in this laptop. The
liveDVD is based on OpenBSD 3.9-RELEASE, so the wireless driver for the
3945 isn't in there.
However, it is interesting that OpenBSD has no problem in detecting and
using the wired network interface (bge0), even if this laptop have a
really broken ACPI / bios:
bge0 at pci4 dev 0 function 0 "Broadcom BCM5789" rev 0x21, BCM5750 C1
(0x4201): irq 10, address 00:16:36:54:a9:ae
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
Attached is the OpenBSD dmesg output.
--
Regards,
Torfinn Ingolfsen,
Norway
--Boundary_(ID_Ne5gcTb/YJRoW08zgdoMTw)
Content-type: text/plain; name=kg-home-dmesg-openbsd-3.9.txt
Content-transfer-encoding: 7BIT
Content-disposition: attachment; filename=kg-home-dmesg-openbsd-3.9.txt
OpenBSD 3.9 (QUETZAL) #2: Wed May 3 10:58:53 CDT 2006
root@quetzal.q-systems.mexico:/usr/src/sys/arch/i386/compile/QUETZAL
cpu0: Genuine Intel(R) CPU T2250 @ 1.73GHz ("GenuineIntel" 686-class) 1.74 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2
cpu0: Enhanced SpeedStep 1300 MHz (1404 mV): unknown EST cpu, no changes possible
real mem = 2145492992 (2095208K)
avail mem = 1951600640 (1905860K)
using 4278 buffers containing 107376640 bytes (104860K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(6e) BIOS, date 05/26/06, BIOS32 rev. 0 @ 0xfd490
pcibios0 at bios0: rev 2.1 @ 0xfd490/0xb70
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd60/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1600 0xdf800/0x800! 0xe0000/0x1800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x27a0 rev 0x03
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x27a1 rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x71c5 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
"Intel PRO/Wireless 3945ABG" rev 0x02 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5789" rev 0x21, BCM5750 C1 (0x4201): irq 10, address 00:16:36:54:a9:ae
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci5 at ppb4 bus 5
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: irq 11
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci6 at ppb5 bus 6
cbb0 at pci6 dev 9 function 0 vendor "Texas Instruments", unknown product 0x8039 rev 0x00: irq 10
vendor "Texas Instruments", unknown product 0x803a (class serial bus subclass Firewire, rev 0x00) at pci6 dev 9 function 1 not configured
vendor "Texas Instruments", unknown product 0x803b (class mass storage subclass miscellaneous, rev 0x00) at pci6 dev 9 function 2 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x27c4 rev 0x02: DMA (unsupported), channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HM120JI>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D201> SCSI0 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask eff5 netmask eff5 ttymask fff7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 8
ugen0: OEM Camera, rev 2.00/1.00, addr 2
ugen1 at uhub2 port 1
ugen1: Broadcom Corp Acer Module, rev 2.00/1.00, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on cd0a
rootdev=0x600 rrootdev=0xf00 rawdev=0xf02
--Boundary_(ID_Ne5gcTb/YJRoW08zgdoMTw)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060808133532.034238c5.torfinn.ingolfsen>