Date: Thu, 24 May 2007 18:40:08 GMT From: "Reuben A. Popp" <rapopp@eastcentral.edu> To: freebsd-amd64@FreeBSD.org Subject: RE: amd64/76136: system halts before reboot Message-ID: <200705241840.l4OIe8E9007147@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR amd64/76136; it has been noted by GNATS.
From: "Reuben A. Popp" <rapopp@eastcentral.edu>
To: bug-followup@FreeBSD.org
Cc: sysadmin@wetteronline.de
Subject: RE: amd64/76136: system halts before reboot
Date: Thu, 24 May 2007 13:14:37 -0500
This still occurs on 6.2-STABLE; source was last synced and built on 05.23.07
CST. The dmesg from the machine is as follows:
[rapopp@niflheim ~]$ dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p4 #2: Wed May 23 07:02:54 CDT 2007
root@niflheim.eastcentral.edu:/usr/obj/usr/src/sys/NIFLHEIMSMP
ACPI APIC Table: <DELL PE_SC3 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2995.50-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf64 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe4bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Logical CPUs per core: 2
real memory = 2147123200 (2047 MB)
avail memory = 2061602816 (1966 MB)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 64 != expected base 24
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci6: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce0: Ethernet address: 00:18:8b:48:cd:9c
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pci10: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pci11: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib8
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 78
at device 14.0 on pci2
mfi0: 667 (229523084s/0x0020/0) - Shutdown command received from host
mfi0: 668 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03:
Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 669 (4278190080s/0x0020/0) - Type 18: Firmware version 1.00.02-0157
mfi0: 670 (4278190096s/0x0008/0) - Battery Present
mfi0: 671 (4278190124s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES)
discovered on PD 08(e1/s255)
mfi0: 672 (4278190124s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08
(e1/s255)
mfi0: 673 (4278190124s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info:
enclPd=08, scsiType=d, portMap=00, sasAddr=500180b04adef700,0000000000000000
mfi0: 674 (4278190124s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 675 (4278190124s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info:
enclPd=08, scsiType=0, portMap=01, sasAddr=50010b90004a9492,0000000000000000
mfi0: 676 (4278190124s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 677 (4278190124s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info:
enclPd=08, scsiType=0, portMap=02, sasAddr=50010b90004a9466,0000000000000000
mfi0: 678 (4278190124s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
mfi0: 679 (4278190124s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info:
enclPd=08, scsiType=0, portMap=04, sasAddr=50010b90004a94a6,0000000000000000
mfi0: 680 (229523155s/0x0020/0) - Adapter ticks 229523155 elapsed 45s: Time
established as 04/10/07 12:25:55; (45 seconds since power on)
mfi0: 681 (229523211s/0x0008/0) - Battery temperature is normal
mfi0: 682 (229523211s/0x0008/0) - Current capacity of the battery is above
threshold
mfi0: 683 (229658411s/0x0008/0) - Battery started charging
mfi0: 684 (229660816s/0x0008/0) - Battery charge complete
mfi0: 685 (229834800s/0x0020/0) - Patrol Read started
mfi0: 716 (229839844s/0x0020/0) - Patrol Read complete
mfi0: 717 (230439600s/0x0020/0) - Patrol Read started
mfi0: 751 (230444672s/0x0020/0) - Patrol Read complete
mfi0: 752 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03:
Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 753 (4278190080s/0x0020/0) - Type 18: Firmware version 1.00.02-0157
mfi0: 754 (4278190102s/0x0008/0) - Battery Present
mfi0: 755 (4278190131s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES)
discovered on PD 08(e1/s255)
mfi0: 756 (4278190133s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08
(e1/s255)
mfi0: 757 (4278190133s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info:
enclPd=08, scsiType=d, portMap=00, sasAddr=500180b04adef700,0000000000000000
mfi0: 758 (4278190133s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 759 (4278190133s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info:
enclPd=08, scsiType=0, portMap=01, sasAddr=50010b90004a9492,0000000000000000
mfi0: 760 (4278190133s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 761 (4278190133s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info:
enclPd=08, scsiType=0, portMap=02, sasAddr=50010b90004a9466,0000000000000000
mfi0: 762 (4278190133s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
mfi0: 763 (4278190133s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info:
enclPd=08, scsiType=0, portMap=04, sasAddr=50010b90004a94a6,0000000000000000
mfi0: 764 (230806502s/0x0020/0) - Adapter ticks 230806502 elapsed 53s: Time
established as 04/25/07 8:55:02; (53 seconds since power on)
mfi0: 765 (230806556s/0x0008/0) - Battery temperature is normal
mfi0: 766 (230806556s/0x0008/0) - Battery started charging
mfi0: 767 (230806556s/0x0008/0) - Current capacity of the battery is above
threshold
mfi0: 768 (230808051s/0x0008/0) - Battery charge complete
mfi0: 769 (231044400s/0x0020/0) - Patrol Read started
mfi0: 800 (231049451s/0x0020/0) - Patrol Read complete
mfi0: 801 (231649200s/0x0020/0) - Patrol Read started
mfi0: 835 (231654268s/0x0020/0) - Patrol Read complete
mfi0: 836 (232254000s/0x0020/0) - Patrol Read started
mfi0: 870 (232259049s/0x0020/0) - Patrol Read complete
mfi0: 871 (232858800s/0x0020/0) - Patrol Read started
mfi0: 905 (232863869s/0x0020/0) - Patrol Read complete
mfi0: 906 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03:
Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 907 (4278190080s/0x0020/0) - Type 18: Firmware version 1.00.02-0157
mfi0: 908 (4278190102s/0x0008/0) - Battery Present
mfi0: 909 (4278190131s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES)
discovered on PD 08(e1/s255)
mfi0: 910 (4278190132s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08
(e1/s255)
mfi0: 911 (4278190132s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info:
enclPd=08, scsiType=d, portMap=00, sasAddr=500180b04adef700,0000000000000000
mfi0: 912 (4278190132s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 913 (4278190132s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info:
enclPd=08, scsiType=0, portMap=01, sasAddr=50010b90004a9492,0000000000000000
mfi0: 914 (4278190132s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 915 (4278190132s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info:
enclPd=08, scsiType=0, portMap=02, sasAddr=50010b90004a9466,0000000000000000
mfi0: 916 (4278190132s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
mfi0: 917 (4278190132s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info:
enclPd=08, scsiType=0, portMap=04, sasAddr=50010b90004a94a6,0000000000000000
mfi0: 918 (233220727s/0x0020/0) - Adapter ticks 233220727 elapsed 52s: Time
established as 05/23/07 7:32:07; (52 seconds since power on)
mfi0: 919 (233220782s/0x0008/0) - Battery temperature is normal
mfi0: 920 (233220782s/0x0008/0) - Battery started charging
mfi0: 921 (233220782s/0x0008/0) - Current capacity of the battery is above
threshold
mfi0: 922 (233222732s/0x0008/0) - Battery charge complete
mfi0: 923 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03:
Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 924 (4278190080s/0x0020/0) - Type 18: Firmware version 1.00.02-0157
mfi0: 925 (4278190102s/0x0008/0) - Battery Present
mfi0: 926 (4278190131s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES)
discovered on PD 08(e1/s255)
mfi0: 927 (4278190133s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08
(e1/s255)
mfi0: 928 (4278190133s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info:
enclPd=08, scsiType=d, portMap=00, sasAddr=500180b04adef700,0000000000000000
mfi0: 929 (4278190133s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 930 (4278190133s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info:
enclPd=08, scsiType=0, portMap=01, sasAddr=50010b90004a9492,0000000000000000
mfi0: 931 (4278190133s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 932 (4278190133s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info:
enclPd=08, scsiType=0, portMap=02, sasAddr=50010b90004a9466,0000000000000000
mfi0: 933 (4278190133s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
mfi0: 934 (4278190133s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info:
enclPd=08, scsiType=0, portMap=04, sasAddr=50010b90004a94a6,0000000000000000
mfi0: 935 (233326645s/0x0020/0) - Adapter ticks 233326645 elapsed 53s: Time
established as 05/24/07 12:57:25; (53 seconds since power on)
mfi0: 936 (233326699s/0x0008/0) - Battery temperature is normal
mfi0: 937 (233326699s/0x0008/0) - Battery started charging
mfi0: 938 (233326699s/0x0008/0) - Current capacity of the battery is above
threshold
mfi0: 939 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03:
Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 940 (4278190080s/0x0020/0) - Type 18: Firmware version 1.00.02-0157
mfi0: 941 (4278190101s/0x0008/0) - Battery Present
mfi0: 942 (4278190129s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES)
discovered on PD 08(e1/s255)
mfi0: 943 (4278190129s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08
(e1/s255)
mfi0: 944 (4278190129s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info:
enclPd=08, scsiType=d, portMap=00, sasAddr=500180b04adef700,0000000000000000
mfi0: 945 (4278190129s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 946 (4278190129s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info:
enclPd=08, scsiType=0, portMap=01, sasAddr=50010b90004a9492,0000000000000000
mfi0: 947 (4278190129s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 948 (4278190129s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info:
enclPd=08, scsiType=0, portMap=02, sasAddr=50010b90004a9466,0000000000000000
mfi0: 949 (4278190129s/0x0002/0) - PD 02(e1/s2) event: Inserted: PD 02(e1/s2)
mfi0: 950 (4278190129s/0x0002/0) - Type 29: Inserted: PD 02(e1/s2) Info:
enclPd=08, scsiType=0, portMap=04, sasAddr=50010b90004a94a6,0000000000000000
mfi0: 951 (233326777s/0x0020/0) - Adapter ticks 233326777 elapsed 50s: Time
established as 05/24/07 12:59:37; (50 seconds since power on)
mfi0: 952 (233326833s/0x0008/0) - Battery temperature is normal
mfi0: 953 (233326833s/0x0008/0) - Battery started charging
mfi0: 954 (233326833s/0x0008/0) - Current capacity of the battery is above
threshold
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pci13: <PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci14: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 7.0 on pci0
pci15: <PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib15
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bce1: Ethernet address: 00:18:8b:48:cd:9a
uhci0: <UHCI (generic) USB controller> port 0xdce0-0xdcff irq 21 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xdcc0-0xdcdf irq 20 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xdca0-0xdcbf irq 21 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc600400-0xfc6007ff irq 21 at
device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
ukbd0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
kbd2 at ukbd0
ums0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci16: <ACPI PCI bus> on pcib16
pci16: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd1: Avocent Avocent DSRIQ-USB, rev 1.10/1.00, addr 2, iclass 3/1
kbd3 at ukbd1
ums0: Avocent Avocent DSRIQ-USB, rev 1.10/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,
default to accept, logging limited to 10 packets/entry by default
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> at ata0-master UDMA33
mfid0: <MFI Logical Disk> on mfi0
mfid0: 571136MB (1169686528 sectors) RAID volume '' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <Dell Virtual Floppy 123> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <Dell Virtual CDROM 123> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(da0:umass-sim1:1:0:0): SCSI Status: Check Condition
(da0:umass-sim1:1:0:0): NOT READY asc:3a,0
(da0:umass-sim1:1:0:0): Medium not present
(da0:umass-sim1:1:0:0): Unretryable error
Opened disk da0 -> 6
Trying to mount root from ufs:/dev/mfid0s1a
bce1: link state changed to UP
--
Reuben A. Popp
Systems Administrator
Information Technology Department
East Central College
1+ 636 583 5195 x2480
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705241840.l4OIe8E9007147>