Date: Tue, 14 Oct 2014 21:43:45 +0200 From: =?UTF-8?Q?Ulrich_Sp=C3=B6rlein?= <uqs@FreeBSD.org> To: Hans Petter Selasky <hps@selasky.org> Cc: freebsd-usb@freebsd.org Subject: Re: CEC device not attaching to xHCI port Message-ID: <CAJ9axoR2iQ=8bNF9Oc1ZW=W_f=0w3iKj=Me=UXaWeHz_-XQ9hQ@mail.gmail.com> In-Reply-To: <5431AE55.4030006@selasky.org> References: <20140929174904.GA15642@coyote.spoerlein.net> <CAJ9axoQ=%2BODvNrr_D8PiBOwNFrn_u3SSm7NueXPoP9hmsbjK1g@mail.gmail.com> <54308CA8.5020304@selasky.org> <CAJ9axoTwk55o%2B9yTKhtipwLuBeEmPoojbQ7-hmMQ_mYbRDzjkg@mail.gmail.com> <5431AE55.4030006@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
2014-10-05 22:47 GMT+02:00 Hans Petter Selasky <hps@selasky.org>: > > On 10/05/14 16:05, Ulrich Sp=C3=B6rlein wrote: >> >> 2014-10-05 2:11 GMT+02:00 Hans Petter Selasky <hps@selasky.org>: >>> >>> On 10/04/14 15:53, Ulrich Sp=C3=B6rlein wrote: >>>> >>>> >>>> 2014-09-29 19:49 GMT+02:00 Ulrich Sp=C3=B6rlein <uqs@freebsd.org>: >>>>> >>>>> >>>>> Hi, >>>>> >>>>> I got a CEC adapter using libCEC to bridge the gap between my XBMC an= d >>>>> TV. The device works fine *if* I plug it into the front ports (which = is >>>>> a bit ugly, so I was wondering why this is not working on the other U= SB >>>>> hub). >>>>> >>> >>> Hi, >>> >>> How many ports have your XHCI got? See dmesg. >>> >>> --HPS >> >> >> Hey >> >> physically I count 4 in the back and 4 in the front (which is an >> expansion plate). Two ports in the back will happily serve umass(4) >> devices (not shown in the dmesg below, I only connect them every once >> in a while). >> > > Maybe you need this patch: > > https://svnweb.freebsd.org/changeset/base/272479 I saw that this was merged to 10.1 recently and gave that new kernel a go, alas no luck usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, igno= red) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, igno= red) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, igno= red) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, igno= red) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT ugen0.2: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ9axoR2iQ=8bNF9Oc1ZW=W_f=0w3iKj=Me=UXaWeHz_-XQ9hQ>