Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 May 2008 16:37:33 GMT
From:      "Shobaki sam." <shsam@free.fr>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   i386/123820: 945GME no /dev/agpgart
Message-ID:  <200805191637.m4JGbXS6028563@www.freebsd.org>
Resent-Message-ID: <200805191640.m4JGe4Wm045335@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         123820
>Category:       i386
>Synopsis:       945GME no /dev/agpgart
>Confidential:   no
>Severity:       non-critical
>Priority:       high
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Mon May 19 16:40:04 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator:     Shobaki sam.
>Release:        FreeBSD 7.0 STABLE
>Organization:
none
>Environment:
Freebsd neptune.soleil 7.0-STABLE FreeBSD 7.0-STABLE #5: Mon May 19 15:59:49 CEST 2008 progen@neptune.soleil:/usr/obj/usr/src/sys/NEPTUNE i386
>Description:
Trying to install FreeBSD on a HP 530 laptop, but it seems there is no AGP.
I have the following in my KERNELCONF

device          agp             # support several AGP chipsets

I also added these even if I have no agpgart.

device          drm             # DRM core module required by DRM drivers
device          i915drm         # Intel i830 through i915

I also added this line to drm_pciids.h:

{0x8086, 0x27AE, 0, "Intel i945GME"}, \ 

But here is the result:

drm0: <Intel i945GME>  on vgapci0
error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP.
device_attach: drm0 attach returned 12 


VIDEO RELATED DMESG output:

vgapci0: <VGA-compatible display> port 0x3000-0x3007 mem 0xf0400000-0xf047ffff,0xe0000000-0xefffffff,0xf0480000-0xf04bffff irq 10 at device 2.0 on pci0
vgapci0: <VGA-compatible display> mem 0xf0500000-0xf057ffff at device 2.0 on pci0
drm1: <Intel i945GME> on vgapci0
error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't initialize AGP.
device_attach: drm0 attach returned 12
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

PCICONF -lv OUTPUT:

hostb0@pci0:0:0:0:	class=0x060000 card=0x30d5103c chip=0x27ac8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:	class=0x030000 card=0x30d5103c chip=0x27ae8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = display
    subclass   = VGA
vgapci1@pci0:0:2:1:	class=0x038000 card=0x30d5103c chip=0x27a68086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 945GM/GU Express Integrated Graphics Controller'
    class      = display
none0@pci0:0:27:0:	class=0x040300 card=0x30d5103c chip=0x27d88086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) High Definition Audio'
    class      = multimedia
pcib1@pci0:0:28:0:	class=0x060400 card=0x30d5103c chip=0x27d08086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:	class=0x060400 card=0x30d5103c chip=0x27d28086 rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:	class=0x0c0300 card=0x30d5103c chip=0x27c88086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:	class=0x0c0320 card=0x30d5103c chip=0x27cc8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib3@pci0:0:30:0:	class=0x060401 card=0x30d5103c chip=0x24488086 rev=0xe1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x30d5103c chip=0x27b98086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GBM (ICH7-M) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x30d5103c chip=0x27df8086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) Ultra ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:	class=0x010601 card=0x30d5103c chip=0x27c58086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GB Mobile I/O Controller Hub SATA cc=AHCI'
    class      = mass storage
none1@pci0:16:0:0:	class=0x028000 card=0x137d103c chip=0x431514e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM4310 USB Controller'
    class      = network
none2@pci0:2:6:0:	class=0x060700 card=0x30d5103c chip=0x14101524 rev=0x01 hdr=0x02
    vendor     = 'ENE Technology Inc'
    device     = 'CB-1420 CardBus Controller'
    class      = bridge
    subclass   = PCI-CardBus
fxp0@pci0:2:8:0:	class=0x020000 card=0x30d5103c chip=0x10688086 rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82562ET/EZ/GT/GZ PRO/100 VE (LOM) Ethernet Controller Mobile'
    class      = network
    subclass   = ethernet

Can somebody work with me to solve this, I am willing to test anything anyone 
has to offer and can provide any details regarding hardware etc..



>How-To-Repeat:

>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805191637.m4JGbXS6028563>