Date: Tue, 03 Apr 2007 15:20:28 -0400 From: alex@schnarff.com To: freebsd-questions@freebsd.org Subject: Broadcom BCM5721 Ethernet Not Recognized on 6.2-RELEASE Message-ID: <20070403152028.sog44hnr1w8kogos@mail.schnarff.com>
next in thread | raw e-mail | index | archive | help
Hello All, I recently put together a new server with 6.2-RELEASE (installed via FTP a few days ago), and it's basically going great. Unfortunately, however, the machine is not recognizing the Broadcom BCM5721 gibabit Ethernet card, despite the fact that (based on archived mailing list posts, at least) this card is supported on at least 6.1-RELEASE. I'm running a generic kernel, and haven't tweaked any fancy networking options; it's about as bare-bones a config as you can get. Given the fact that the base system is a Tyan Transport GT20 B2865G20S4H (see http://www.newegg.com/Product/Product.aspx?Item=N82E16856152019 , which is where I got it), and the dmesg/ifconfig output below, can anyone help me figure out why this card isn't being recoginzed? Additionally, any info as to the "acpi_bus_number: can't get _ADR" lines would be appreciated, though those appear to be a non-issue based on other posts I've seen. Thanks, Alex Kirk [alex@tms /usr/src/sys/i386/conf]$ dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP acpi_alloc_wakeup_handler: can't alloc wake memory Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual Core AMD Opteron(tm) Processor 175 (2210.19-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x3<LAHF,CMP> Cores per package: 2 real memory = 3756916736 (3582 MB) avail memory = 3677388800 (3507 MB) ACPI APIC Table: <Nvidia AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 21 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] usb1: waiting for BIOS to give up control usb1: timed out waiting for BIOS usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xcc00-0xcc0f mem 0xfebfb000-0xfebfbfff irq 23 at device 7.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xb800-0xb80f mem 0xfebfa000-0xfebfafff irq 21 at device 8.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xb400-0xb407 mem 0xfebf9000-0xfebf9fff irq 22 at device 10.0 on pci0 nve0: Ethernet address 00:e0:81:5f:6d:4b miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:e0:81:5f:6d:4b pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe5f0000-0xfe5fffff irq 19 at device 0.0 on pci4 miibus1: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:e0:81:5f:6d:4a pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci5: <ACPI PCI bus> on pcib5 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDROM <CD-224E-N/1.AA> at ata0-slave UDMA33 ad4: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata2-master SATA300 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a [alex@tms /usr/src/sys/i386/conf]$ ifconfig -a nve0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.2.107 netmask 0xffffff00 broadcast 192.168.2.255 ether 00:e0:81:5f:6d:4b media: Ethernet autoselect (100baseTX <full-duplex>) status: active bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> ether 00:e0:81:5f:6d:4a media: Ethernet autoselect (none) status: no carrier plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070403152028.sog44hnr1w8kogos>