Date: Thu, 12 Oct 2006 16:17:28 -0700 From: "Matthew Jacob" <lydianconcepts@gmail.com> To: "Johannes.Kruger@nokia.com" <Johannes.Kruger@nokia.com> Cc: freebsd-scsi@freebsd.org, freebsd-hackers@freebsd.org Subject: Re: LSI1064 and LSI1064E and mpt Message-ID: <7579f7fb0610121617n2b6b4cdap67eeb0c9b5a58da8@mail.gmail.com> In-Reply-To: <6E2B2C4FBED4D84D80F52ECD1579D06801C3E03D@bsebe101.NOE.Nokia.com> References: <7579f7fb0610121333q30cff91dnff8a6684b9fa298d@mail.gmail.com> <6E2B2C4FBED4D84D80F52ECD1579D06801C3E03D@bsebe101.NOE.Nokia.com>
next in thread | previous in thread | raw e-mail | index | archive | help
And the problem is....? On 10/12/06, Johannes.Kruger@nokia.com <Johannes.Kruger@nokia.com> wrote: > Hi. > I figured I'll give this mailing list a shot in helping me figure out a > problem I have. > > I have 2 reference boards from LSI, using the mpt driver. > Each one has MPI FW revision 1.5.13.0 > They repond differently. > The PCI-X version LSI1064 reports running in RAID-1 and do NOT get the > error message. > The PCI-express do get the error message, and thus reports RAID-0 > Both are configured as RAID-1 Integrated mirroring. Using the same 2 > disks on both, swapping them out back and forth between the testing. > > NOTE: the behavior is the same with FW version 1.5.12.0 except with > 1.5.12.0 I get notify events on which I can report sync percentage. > > ---------------- ERROR MESSAGE ----------------------- > . > . > mpt_read_cfg_page: Config Info Status 22 > mpt_refresh_raid_vol: Failed to read RAID Vol Page(0) > mpt0:vol0(mpt0:0:0): Settings (netlog:mpt .. ) > mpt0:vol0(mpt0:0:0): 0 Members: > mpt0:vol0(mpt0:0:0): RAID-0 - Optimal > . > . > ------------------------------------------------------ > > > Johan > > > . > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7579f7fb0610121617n2b6b4cdap67eeb0c9b5a58da8>