Date: Wed, 1 May 2002 06:56:48 -0500 (CDT) From: Larry Rosenman <ler@lerctr.org> To: FreeBSD-gnats-submit@FreeBSD.org Cc: ler@lerctr.org Subject: kern/37624: USB devices: 82801CA/CAM give error with ANY device Message-ID: <200205011156.g41BumbC000949@lerlaptop.lerctr.org>
next in thread | raw e-mail | index | archive | help
>Number: 37624
>Category: kern
>Synopsis: USB devices: 82801CA/CAM give error with ANY device
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed May 01 05:00:02 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Larry Rosenman
>Release: FreeBSD 4.5-STABLE i386
>Organization:
LERCTR Consulting
>Environment:
System: FreeBSD lerlaptop 4.5-STABLE FreeBSD 4.5-STABLE #25: Wed May 1 00:30:38 CDT 2002 ler@lerlaptop:/usr/obj/usr/src/sys/LERLAPTOP i386
Fujitsu Lifebook C6651.
Full dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #25: Wed May 1 00:30:38 CDT 2002
ler@lerlaptop:/usr/obj/usr/src/sys/LERLAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1129.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 259522560 (253440K bytes)
avail memory = 248762368 (242932K bytes)
Preloaded elf kernel "kernel" at 0xc0392000.
Preloaded elf module "agp.ko" at 0xc039209c.
Preloaded elf module "accf_data.ko" at 0xc0392138.
Preloaded elf module "accf_http.ko" at 0xc03921dc.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 (i830M GMCH) SVGA controller> mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 11 at device 2.0 on pci0
agp0: detected 8192k stolen memory
pci0: <unknown card> (vendor=0x8086, dev=0x3577) at 2.1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x18c0-0x18df irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x18e0-0x18ff irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pcic0: <YENTA PCI-CARDBUS Bridge> irq 11 at device 10.0 on pci1
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <YENTA PCI-CARDBUS Bridge> irq 11 at device 10.1 on pci1
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xe0200800-0xe02008ff irq 11 at device 13.0 on pci1
rl0: Ethernet address: 00:e0:00:7e:d0:45
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <unknown card> (vendor=0x10cf, dev=0x2010) at 14.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <SMBus controller> port 0x1c00-0x1c1f irq 11 at device 31.3 on pci0
pcm0: <Intel 82801CA (ICH3)> port 0x1880-0x18bf,0x1000-0x10ff irq 11 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcefff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pca0: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
ata1-slave: ATAPI identify retries exceeded
pccard: card inserted, slot 1
pccard: card removed, slot 1
pccard: card inserted, slot 1
ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA100
acd0: DVD-ROM <HITACHI DVD-ROM GD-S250> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
wi0 at port 0x240-0x27f irq 11 flags 0x10000 slot 1 on pccard1
wi0: 802.11 address: 00:06:25:a8:e0:17
wi0: using RF:PRISM3(PCMCIA)
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.05
>Description:
on the above referenced platform, when I insert a USB Optical
trackball (M$ if it matters), I get an error saying device error, and
it disables the port. It doesn't even get the ID string. On my
previous laptop (Toshiba Satellite 4005CDS), it "just works" (this was
an OHCI interface, however).
I am willing to help debug, but have no idea on where to start.
>How-To-Repeat:
insert usb mouse to above config
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200205011156.g41BumbC000949>