Date: Thu, 15 Feb 1996 17:35:28 -0500 From: "Shawn T. Buck" <shbuck@vt.edu> To: questions@freebsd.org Subject: Compiling a custom kernel Message-ID: <3123B530.41C67EA6@vt.edu>
next in thread | raw e-mail | index | archive | help
When I run 'make depend kernel' I get the follow message: loading kernel aic7xxx.o: Undefined symbol `_scsi_attachdevs' referenced from text segment aic7xxx.o: Undefined symbol `_scsi_attachdevs' referenced from text segment aic7xxx.o: Undefined symbol `_sc_print_addr' referenced from text segment aic7xxx.o: Undefined symbol `_sc_print_addr' referenced from text segment aic7xxx.o: Undefined symbol `_sc_print_addr' referenced from text segment aic7xxx.o: Undefined symbol `_sc_print_addr' referenced from text segment aic7xxx.o: Undefined symbol `_sc_print_addr' referenced from text segment aic7xxx.o: Undefined symbol `_sc_print_addr' referenced from text segment aic7xxx.o: Undefined symbol `_scsi_done' referenced from text segment *** Error code 1 Stop. What exactly does this mean? Included is my configuration file 'MYCONF'. ------MYCONF starts here------ machine "i386" cpu "I586_CPU" ident MYCONF maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem #option NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI disk wcd0 #controller ncr0 controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller ahc1 at isa? bio irq ? vector ahcintr #controller ahb0 at isa? bio irq ? vector ahbintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seai ntr #controller scbus0 #device sd0 #device st0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr #controller matcd0 at isa? port ? bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmint r device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device lpt2 at isa? port? tty # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 device ed0 at isa? port 0x340 net irq 11 iomem 0xd8000 vector edintr #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ix0 at isa? port 0x350 net irq 5 iomem 0xd8000 iosiz 32768 vector ixintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr options "SBC_IRQ=5" device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 conflicts device joy0 at isa? port "IO_GAME" pseudo-device speaker -----MYCONF ends here------ If you need system specs, I have a GATEWAY 2000 with a P5-120 processor, two 1GB IDE hard drives, one IDE cdrom drive(Mitsumi), one tape drive, one 3.5" floppy, two com ports, one lpt port, one NE2000 compatible ethernet card, one PS/2 mouse. I think that's about it. My current kernel is the GENERIC kernel recompiled with ATAPI support for my cdrom and PS/2 mouse support so X can run.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3123B530.41C67EA6>