Date: Tue, 13 Sep 2005 16:34:51 +0200 From: Tijl Coosemans <tijl@ulyssis.org> To: freebsd-mobile@freebsd.org Subject: Re: Toshiba ToPIC95B not working on 6.0-BETA4 Message-ID: <200509131634.52067.tijl@ulyssis.org> In-Reply-To: <20050913095341.GA52017@r0ck.mine.nu> References: <20050913095341.GA52017@r0ck.mine.nu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 13 September 2005 11:53, Niels Heinen wrote: > I recently received a Toshiba 460CDT and am trying to get > the most out of it. Its an old device but should still be > usable. Unfortunately I can't get PCMCIA to work. > > In the BIOS you can configure the 'PC Card controller mode'. When I > set it to PCIC compatible, I see nothing in the dmesg. When I set > it to CardBus/16-but I see that the slots are detected. > > However, whenever I insert a PCMCIA device, like my Prims/2 based > NIC, which works fine in my other FreeBSD devices, I get: > > CIS is too long -- truncating > pccard0: Card has no functions! > cbb0: PC Card card activation failed > > This must be a bug.. maybe its in the Toshiba ToPIC95B support ? I used to have a 480CDT which has the same controller. Support for it has always been troublesome, but I think it works in FreeBSD 5.x. Otherwise PCIC mode should work, but then you need the OLDCARD kernel and I'm not sure if FreeBSD 6 still has that. Try compiling a kernel without device cbb device pccard device cardbus and instead use device card device pcic You also need to add 'pccard_enable="YES"' to /etc/rc.conf and since you're using a NIC you also have to setup 'pccard_ifconfig'.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200509131634.52067.tijl>