Date: Wed, 25 Jun 2003 09:49:50 -0400 From: Thomas Dickey <dickey@radix.net> To: freebsd-current@freebsd.org Subject: problem installing 4.7/4.8, etc Message-ID: <20030625134950.GA24775@saltmine.radix.net>
next in thread | raw e-mail | index | archive | help
--WIyZ46R2i8wDzkSu Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I'm setting up a new machine, and none of the current *BSD's install on it. Linux works. The *BSD's choke during the device identification. Perhaps someone on this list knows why. Attaching a copy of dmesg output from one of the Linux's I installed. The *BSD's appear to be missing an interrupt in the IDE/PCI bus hardware (about which I know little ;-) -- Thomas E. Dickey <dickey@radix.net> <dickey@herndon4.his.com> http://dickey.his.com ftp://dickey.his.com --WIyZ46R2i8wDzkSu Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.out" Linux version 2.4.20 (root@midas) (gcc version 3.2.2) #2 Mon Mar 17 22:02:15 PST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) BIOS-e820: 000000003dff0000 - 000000003dff3000 (ACPI NVS) BIOS-e820: 000000003dff3000 - 000000003e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. On node 0 totalpages: 229376 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=vmlinuz ramdisk_size=7000 root=/dev/hda12 vga=normal ro Initializing CPU#0 Detected 2666.641 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5321.52 BogoMIPS Memory: 904536k/917504k available (1733k kernel code, 12580k reserved, 568k data, 112k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfbbb0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router SIS [1039/0008] at 00:02.0 PCI: Found IRQ 5 for device 00:02.5 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 15 PCI: Found IRQ 5 for device 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SiS5513 ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 4R120L0, ATA DISK drive hdb: Maxtor 6Y120P0, ATA DISK drive hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63 hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=15881/240/63 hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 7000K size 1024 blocksize loop: loaded (max 8 devices) ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 3099.200 MB/sec 32regs : 2028.000 MB/sec pIII_sse : 3482.400 MB/sec pII_mmx : 3123.200 MB/sec p5_mmx : 3027.200 MB/sec raid5: using function: pIII_sse (3482.400 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 112k freed Adding Swap: 2094080k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,12), internal journal sis900.c: v1.08.06 9/24/2002 eth0: Realtek RTL8201 PHY transceiver found at address 2. eth0: Using transceiver found at address 2 as default eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 11, 00:40:ca:58:80:1c. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Intel PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. ds: no socket drivers loaded! usb.c: registered new driver usbdevfs usb.c: registered new driver hub SiS router pirq escape (99) SiS router pirq escape (99) hcd.c: ehci-hcd @ 00:03.2, PCI device 1039:7002 (Silicon Integrated Systems [SiS]) hcd.c: irq 9, pci mem f8936000 usb.c: new USB bus registered, assigned bus number 1 ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0 hub.c: USB hub found hub.c: 6 ports detected SiS router pirq escape (96) SiS router pirq escape (96) usb-ohci.c: USB OHCI at membase 0xf893e000, IRQ 5 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected SiS pirq: advanced IDE/ACPI/DAQ mapping not yet implemented advanced SiS pirq mapping not yet implemented usb-ohci.c: USB OHCI at membase 0xf8940000, IRQ 11 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 3 ports detected Intel 810 + AC97 Audio, version 0.21, 15:37:49 Mar 11 2003 PCI: Found IRQ 3 for device 00:02.7 PCI: Sharing IRQ 3 with 00:0b.0 i810: SiS 7012 found at IO 0xd400 and 0xd000, IRQ 3 i810_audio: Audio Controller supports 6 channels. ac97_codec: AC97 Audio codec, id: 0x414c:0x4740 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 usb-uhci.c: $Revision: 1.275 $ time 15:38:38 Mar 11 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 eth0: Media Link On 100mbps full-duplex --WIyZ46R2i8wDzkSu--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030625134950.GA24775>