Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Aug 2000 15:49:02 +0200
From:      Jascha Hoogenraad <jascha@equilibrate.net>
To:        freebsd-stable@FreeBSD.org
Subject:   Adaptec 2940u2w + 4.1-stable from 2-8
Message-ID:  <20000803154902.A470@equilibrate.net>

next in thread | raw e-mail | index | archive | help

--PNTmBPCT7hxwcZjr
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Dear FreeBSD world,

i have the following problem and i hope you know an answer for it:

I run 4.1-stable (from 2-8 from ftp.nl.freebsd.org)

i get this error:

www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
vinum: drive scsi0 is down
vinum: mail.p0.s0 is crashed
vinum: mail.p0 is faulty
vinum: mail is down
(da0:ahc0:0:0:0): Synchronize cache failed, status =3D=3D 0x5b, scsi status=
 =3D=3D 0x0
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack
www.p0.s0: fatal write I/O error
scsi0: fatal drive I/O error
(da0:ahc0:0:0:0): Invalidating pack

If anyone knows where this comes from and/or how to fix this i would be gra=
tefull.. I'm a very faithfull FreeBSD user and have never had real big trou=
bles with FreeBSD till 4.x, maybe it's just an hardware error, but the scsi=
 bios tests en checkit tests run without much problems..


my dmesg is:

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Thu Aug  3 12:55:07 GMT 2000
    root@www2.equilibrate.net:/www/usr/obj/usr/src/sys/WWW2
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (602.19-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x683  Stepping =3D 3
  Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PA
T,PSE36,MMX,FXSR,XMM>
real memory  =3D 536854528 (524272K bytes)
config> q
avail memory =3D 519086080 (506920K bytes)
Preloaded elf kernel "kernel" at 0xc031c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C596B PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B ATA66 controller> port 0xb800-0xb80f at device 4.1 on=
 pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.2 irq 12
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xb000-0xb0ff mem 0xe1000000-=
0xe10
00fff irq 10 at device 11.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=3D7, 16/255 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xe0800000-0=
xe080
007f irq 12 at device 13.0 on pci0
xl0: Ethernet address: 00:50:da:df:3c:05
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 12407MB <Maxtor 91301U3> [25209/16/63] at ata0-master using UDMA66
acd0: CDROM <CD-ROM 48X/TKU> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318436LW 0005> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing En=
abled
da0: 17522MB (35885168 512 byte sectors: 255H 63S/T 2233C)
vinum: loaded
vinum: reading configuration from /dev/da0s1e

Kind Regards,
Jascha Hoogenraad

--=20
Jascha Hoogenraad <mailto:jascha@equilibrate.net>
Equilibrate Networking - Voice: +31-70-3364900 - Fax: +31-70-3364901

--PNTmBPCT7hxwcZjr
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia

iQCVAwUBOYl4TtiyeT6k//vtAQEaNAP/SVzXNgOuru9874hk5rmtM7HpPKHB+VI0
9yN7Wv1UsXtXKvo6Bkhc/PX37HG8Qc7ZA19jfTEQpxC+JryTNko4EncJqamjtR81
PcqgiYGVao4jaGQg0QM2gHEQkLXzFwfj+bPFO2c++ZLFQuBw/xAixM4bMpsvPINn
aDdZCDthWd4=
=ACqM
-----END PGP SIGNATURE-----

--PNTmBPCT7hxwcZjr--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000803154902.A470>