Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 3 Sep 2011 21:14:16 +0300
From:      =?windows-1251?B?yu7t/Oru4iDF4uPl7ejp?= <>
To:        Marco Beishuizen <>
Cc:, Mike Tancsa <>
Subject:   Re[4]: vpn using pptpclient in FreeBSD
Message-ID:  <>
In-Reply-To: <alpine.BSF.2.00.1109021232490.3027@yokozuna.lan>
References:  <alpine.BSF.2.00.1108302340540.3063@yokozuna.lan> <> <alpine.BSF.2.00.1108312159370.9385@yokozuna.lan> <> <alpine.BSF.2.00.1109012218560.2952@yokozuna.lan> <> <alpine.BSF.2.00.1109021232490.3027@yokozuna.lan>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Здравствуйте, Marco.

Вы писали 2 сентября 2011 г., 13:42:23:

MB> On Fri, 2 Sep 2011, the wise Коньков Евгений wrote:

>>> set iface route
>> you say that behind tunnele thereis subnet, but
>> MB> [B1] ->
>> you have address from subnet addres on local machine
>> so you get this message:
>> MB> Loop detected on ng0
>> add routes only for subnets that on the other end of tunnel and not
>> local
>>>> set iface route
>> also you may remove  'iface route' from config. and setup tunnel.
>> after that try to ping the other end: ping
>> add route by hand:
>> # route add XXXXXXXX/X
>> # route add YYYYYYYY/Y

MB> My local machine has ip 192.168.x.x. IP 130.115.x.x is the university 
MB> network I want to connect to. When setting the "iface route" to 
MB>, the connection doesn't work either:
MB> ...
MB> [B1] IPCP: state change Ack-Sent --> Opened
MB> [B1] IPCP: LayerUp
MB> [B1] ->
MB> [B1] IFACE: Add route failed: File exists
MB> [B1] IFACE: Up event
MB> ...

MB> With the "iface route" removed, the other end is not 
MB> pingable, so there is no connection in this case.

MB> Marco

Please describe your networks fully

also I ask to send output of:
netstat -nr

С уважением,

Want to link to this message? Use this URL: <>