Date: Wed, 13 Oct 2004 08:40:26 +0200 (CEST) From: daniele@callimaco.com To: freebsd-doc@FreeBSD.org Subject: missing a command in RAID FreeBSD documentation Message-ID: <63687.213.188.197.133.1097649626.squirrel@213.188.197.133>
next in thread | raw e-mail | index | archive | help
Good morning, i write you because i think you have an error on this page of FreeBSD documentation: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/raid.html In documentation, you miss a command in rebuilding RAID array procedure. Let me know if i have reason. Best regards, Daniele Biasci. You will first need to detach the disk from the array so that you can safely remove it: # atacontrol detach 3 Replace the disk. Reattach the disk as a spare: # atacontrol attach 3 Master: ad6 <MAXTOR 6L080J4/A93.0500> ATA/ATAPI rev 5 Slave: no device present <MISSING> # atacontrol addspare ar0 ad6 </MISSING> Rebuild the array: # atacontrol rebuild ar0 The rebuild command hangs until complete. However, it is possible to open another terminal (using Alt+Fn) and check on the progress by issuing the following command: # dmesg | tail -10 [output removed] ad6: removed from configuration ad6: deleted from ar0 disk1 ad6: inserted into ar0 disk1 as spare # atacontrol status ar0 ar0: ATA RAID1 subdisks: ad4 ad6 status: REBUILDING 0% completed Wait until this operation completes
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?63687.213.188.197.133.1097649626.squirrel>