Date: Fri, 20 Apr 2001 15:20:36 -0700 (PDT) From: John Baldwin <jhb@FreeBSD.org> To: smp@FreeBSD.org Subject: Athlon AMD SMP Runs Message-ID: <XFMail.010420152036.jhb@FreeBSD.org>
next in thread | raw e-mail | index | archive | help
Completely stock -current as of Thursday on a dual Athlon test box graciously
provided by AMD with the prodding of David O`Brien.
> dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-SNAP-20010419 #1: Fri Apr 20 14:59:46 PDT 2001
root@:/usr/src/sys/compile/GUINESS-smp
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1194.68-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x661 Stepping = 1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 1073741824 (1048576K bytes)
avail memory = 1041207296 (1016804K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc043b000.
Pentium Pro MTRR support enabled
Using $PIR table, 268435454 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdc000-0xdcfff irq 11 at device 7.4
on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1000-0x10ff mem
0xf4001000-0xf4001fff irq 5 at device 13.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1400-0x14ff mem
0xf4002000-0xf4002fff irq 11 at device 13.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
pci0: <display, VGA> at 14.0 (no driver attached)
xl0: <3Com 3c980 Fast Etherlink XL> port 0x1c00-0x1c7f mem
0xf4004000-0xf400407f irq 3 at device 15.0 on pci0
xl0: command never completed!
xl0: command never completed!
xl0: Ethernet address: 00:e0:81:02:ac:38
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c980 Fast Etherlink XL> port 0x1c80-0x1cff mem
0xf4004400-0xf400447f irq 11 at device 16.0 on pci0
xl0: command never completed!
xl0: command never completed!
xl1: Ethernet address: 00:e0:81:02:ac:39
miibus1: <MII bus> on xl1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0700> can't assign resources
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-M1402> at ata1-master PIO4
Waiting 2 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
SMP: AP CPU #1 Launched!
acquring duplicate lock of same type: "allproc"
1st @ ../../kern/kern_proc.c:584
2nd @ ../../kern/kern_proc.c:143
lock order reversal
1st vnode interlock last acquired @ ../../kern/vfs_vnops.c:625
2nd 0xc03c9fc0 mntvnode @ ../../ufs/ffs/ffs_vfsops.c:967
3rd 0xdf104e2c vnode interlock @ ../../ufs/ffs/ffs_vfsops.c:976
# mptable
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f7a40
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x2f
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009f870
signature: 'PCMP'
base table length: 324
version: 1.4
checksum: 0x67
OEM ID: 'TYAN '
Product ID: 'GUINNESS '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 32
local APIC address: 0xfee00000
extended table length: 344
extended table checksum: 16
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
1 0x10 BSP, usable 6 6 1
0x183fbff
0 0x10 AP, usable 6 6 1
0x183fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 2 0
INT active-hi edge 2 1 2 1
INT active-hi edge 2 0 2 2
INT active-lo level 2 3 2 3
INT active-hi edge 2 4 2 4
INT active-lo level 2 5 2 5
INT active-hi edge 2 6 2 6
INT active-hi edge 2 7 2 7
INT active-hi edge 2 8 2 8
INT active-hi edge 2 9 2 9
INT active-hi edge 2 10 2 10
INT active-lo level 2 11 2 11
INT active-hi edge 2 12 2 12
INT active-hi edge 2 13 2 13
INT active-hi edge 2 14 2 14
INT active-hi edge 2 15 2 15
INT active-hi edge 2 16 2 16
INT active-hi edge 2 17 2 17
INT active-hi edge 2 18 2 18
INT active-lo level 2 19 2 19
INT active-hi edge 2 20 2 20
INT active-lo level 2 21 2 21
INT active-hi edge 2 22 2 22
INT active-hi edge 2 23 2 23
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 2 0 255 0
NMI active-hi edge 1 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x40000000
address range: 0xb4000000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xf4000000
address range: 0x8000000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfc000000
address range: 0x2e00000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfee01000
address range: 0x11ff000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x24000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xc8000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xcc000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd0000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd2000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd4000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd6000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd8000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xe0000
address range: 0x12000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xf4000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xf8000
address range: 0x4000
--
Bus Heirarchy
bus ID: 2 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
===============================================================================
--
John Baldwin <john@baldwin.cx> -- http://www.FreeBSD.org/~jhb/
PGP Key: http://www.baldwin.cx/~john/pgpkey.asc
"Power Users Use the Power to Serve!" - http://www.FreeBSD.org/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.010420152036.jhb>