Date: Fri, 28 Apr 1995 01:08:07 -0700 (PDT) From: "Rodney W. Grimes" <rgrimes@gndrsh.aac.dev.com> To: mrami@minerva.cis.yale.edu Cc: dufault@hda.com, joerg_wunsch@uriah.heep.sax.de, freebsd-bugs@freefall.cdrom.com Subject: Re: i386/369: (AHA1542A problems) Message-ID: <199504280808.BAA05769@gndrsh.aac.dev.com> In-Reply-To: <Pine.BSI.3.91.950428001403.115A-100000@mramirez.sy.yale.edu> from "Marc Ramirez" at Apr 28, 95 00:30:08 am
next in thread | previous in thread | raw e-mail | index | archive | help
> > I've never replied to two people at once before! This is neat! > > On Thu, 27 Apr 1995, Peter Dufault wrote: > > > J Wunsch writes: > > > > > > I'm also using an AHA1540A in one machine. I do have some problems > > > when using this machine as an NFS server, but the AHA itself appears > > > to work. (E.g., i can start compiling the world on the machine > > > itself. Last time i tried, i gave up after ~ 48 hours, it's only > > > a 386sx/16 :-) > > > > > > My aha is: > > > aha-1540a > > > assy 416006-03 Rev D (on the PCB) > > > 420504-00 C > > > MCODE E7BC (on the firmware ROM) > > Okay, here is my card: (didn't worry too much about the BIOS) > > AHA1542A > ASSY 416006-01 Rev D > Firmware: 420504-00 C MCODE E7BC > > AIC: 420300 E 9001 > > Settings: > Synchronous negotiation OFF (default) > Diagnostics OFF (default) > SCSI parity checking enabled (default) > SCSI address 7 (default) > DMA channel 5 (default) > IRQ line 11 (default) > DMA transfer spped 5.0 MB/s (default) > AT BIOS wait states disabled (default) > AT port address 330H (default) > AT BIOS address 0DC000H (default) > automatic Request Sense disabled (???) If you indeed to have a jumper installed on J6 pin pair 5, please remove it, that is the default setting for an aha154X card. > BIOS enabled (default) -- Rod Grimes rgrimes@gndrsh.aac.dev.com Accurate Automation Company Custom computers for FreeBSD
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199504280808.BAA05769>