Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 12 Dec 2000 14:24:25 -0800 (PST)
From:      Matthew Jacob <mjacob@feral.com>
To:        Mike Smith <msmith@FreeBSD.ORG>
Cc:        alpha@FreeBSD.ORG
Subject:   Re: -current not bootable on Rawhide (as4100) 
Message-ID:  <Pine.LNX.4.21.0012121419220.26829-100000@zeppo.feral.com>
In-Reply-To: <200012122130.eBCLUu305172@mass.osd.bsdi.com>

next in thread | previous in thread | raw e-mail | index | archive | help

> > On Mon, Dec 11, 2000 at 07:40:22PM -0800, Mike Smith wrote:
> > > (The box seems to be missing /usr/share/misc/pci_vendors).
> > 
> > It is at PRE_SMPNG.  I'm not willing to issue the ``make installworld''
> > until a -current kernel boots on it.
> 
> Understood.  It should be fixed now.

Not yet.

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sio 0 at to isa (string)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 flags to 80 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting vga 0 at to isa (string)
FreeBSD 5.0-CURRENT #0: Tue Dec 12 13:56:36 PST 2000
    mjacob@farrago.feral.com:/tstsys/compile/GPLUS
AlphaServer 4100
AlphaServer 4100 5/533 4MB, 531MHz
8192 byte page size, 4 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000100020117
real memory  = 1608482816 (1570784K bytes)
Physical memory chunk(s):
0x00722000 - 0x5ffeffff, 1603067904 bytes (195687 pages)
avail memory = 1560805376 (1524224K bytes)
Preloaded elf kernel "kernel" at 0xfffffc0000702000.
Preloaded elf module "ispfw.ko" at 0xfffffc00007020c0.
WARNING: size of kinfo_proc (904) should be 640!!!
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
Creating DISK md0
md0: Malloc disk
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0: physical bus=0
found->	vendor=0x1000, dev=0x0001, revid=0x02
	bus=0, slot=1, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=4
	map[10]: type 4, range 32, base 01fffc00, size  8, enabled
	map[14]: type 1, range 32, base 07fdde00, size  8, enabled
found->	vendor=0x1011, dev=0x0009, revid=0x12
	bus=0, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=8
	map[10]: type 4, range 32, base 01fffd00, size  7, enabled
	map[14]: type 1, range 32, base 07fddf00, size  7, enabled
found->	vendor=0x1077, dev=0x1020, revid=0x05
	bus=0, slot=4, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=16
	map[10]: type 4, range 32, base 01fffe00, size  8, enabled
	map[14]: type 1, range 32, base 07fde000, size 12, enabled
found->	vendor=0x1077, dev=0x1020, revid=0x05
	bus=0, slot=5, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=20
	map[10]: type 4, range 32, base 01ffff00, size  8, enabled
	map[14]: type 1, range 32, base 07fdf000, size 12, enabled
pci0: <PCI bus> on pcib0
sym0: <810> port 0x1fffc00-0x1fffcff mem 0x7fdde00-0x7fddeff irq 4 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final   SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 268 msec, 33165 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 284 msec, 31296 KHz
sym0: interrupting at IRQ 0x10 intA (vec 0xb40)
de0: <Digital 21140 Fast Ethernet> port 0x1fffd00-0x1fffd7f mem 0x7fddf00-0x7fddf7f irq 8 at device 2.0 on pci0
de0: interrupting at IRQ 0x0 intA (vec 0xb80)
de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:f8:01:8b:d7
de0: enabling Full Duplex 100baseTX port
bpf: de0 attached
Qlogic ISP Driver, FreeBSD Version 5.4, Core Version 2.0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1fffe00-0x1fffeff mem 0x7fde000-0x7fdefff irq 16 at device 4.0 on pci0
isp0: using Memory space register mapping
isp0: interrupting at IRQ 0x8 intA (vec 0xc00)
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, loaded F/W Revision 4.65.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7
isp1: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffff00-0x1ffffff mem 0x7fdf000-0x7fdffff irq 20 at device 5.0 on pci0
isp1: not configuring
device_probe_and_attach: isp1 attach returned 19
pcib1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
pcib1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
Attaching Real Console
sio1: gdb debugging port
pci1: physical bus=0
found->	vendor=0x8086, dev=0x0482, revid=0x15
	bus=0, slot=1, func=0
	class=00-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1077, dev=0x2100, revid=0x03
	bus=0, slot=3, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=12
	map[10]: type 4, range 32, base 01ffff00, size  8, enabled
	map[14]: type 1, range 32, base 07fef000, size 12, enabled
pci1: <PCI bus> on pcib1
eisab0: <PCI-EISA bridge> at device 1.0 on pci1
isp2: <Qlogic ISP 2100 PCI FC-AL Adapter> port 0x1ffff00-0x1ffffff mem 0x7fef000-0x7feffff irq 12 at device 3.0 on pci1
isp2: not configuring
device_probe_and_attach: isp2 attach returned 19
panic: cpu_initclocks: no clock attached
panic
Stopped at      Debugger+0x2c:  ldq     ra,0(sp) <0xfffffc0000707cc0>   <ra=0xfffffc000054f8c0,sp=0xfffffc0000707cc0>
db> 




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0012121419220.26829-100000>