Date: Tue, 14 Aug 2012 15:25:41 -0400 From: Adam McDougall <mcdouga9@egr.msu.edu> To: Alexander Motin <mav@FreeBSD.org> Cc: freebsd-stable@FreeBSD.org Subject: Re: High load event idl. Message-ID: <20120814192540.GV68639@egr.msu.edu> In-Reply-To: <4F9D4491.2060007@FreeBSD.org> References: <CAPjTQNGts290DyjORNfir8_rZ5S_vdog%2BJMEBA9mc2vJhUa=jg@mail.gmail.com> <4F9CCEF2.6050609@FreeBSD.org> <20120429155512.M91148@sola.nimnet.asn.au> <4F9CDE91.1060300@FreeBSD.org> <CAPjTQNF=0Hgq_7BxeK_8o6DRQ%2BUJ_r94Y3PqwF8f_ccDeA_hHQ@mail.gmail.com> <4F9D2F0C.4050501@FreeBSD.org> <20120429122714.GA56829@ravenloft.kiev.ua> <4F9D3DF8.9000800@FreeBSD.org> <20120429133056.GA58422@ravenloft.kiev.ua> <4F9D4491.2060007@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--reI/iBAAp9kzkmX4 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Sun, Apr 29, 2012 at 04:39:29PM +0300, Alexander Motin wrote: On 04/29/12 16:30, Alex Kozlov wrote: > On Sun, Apr 29, 2012 at 04:11:20PM +0300, Alexander Motin wrote: >> On 04/29/12 15:27, Alex Kozlov wrote: >>> On Sun, Apr 29, 2012 at 03:07:40PM +0300, Alexander Motin wrote: >>>> On 04/29/12 15:04, Oliver Pinter wrote: >>>>> Removing dummynet from kernel don't chanage anything, that is releated >>>>> to load average. The loadavg hold to 0.70 +/- 0.2. (single user : sh + >>>>> top) >>>> >>>> New ktr dump? >>> I have similar issue on one of my laptops. Should I provide ktr dump? >>> http://lists.freebsd.org/pipermail/freebsd-current/2011-September/027133.html >> In your case HPET also shares interrupt with other devices. I suspect >> that may be a reason. Every time when swi thread runs loadavg, other CPU >> runs shared interrupt handler, that is accounted as result. Please show >> your verbose dmesg. > Attached. In your case HPET could solely use IRQ22 that seems free now. After recent changes in ACPI code it is detected before PCI devices and so doesn't avoids sharing. You may try to hint it specific IRQ by adding to loader,conf line: hint.hpet.0.allowed_irqs="0x00400000" -- Alexander Motin I think I am having the same issue on my Sun Fire x4150 servers. It goes away when I sysctl kern.eventtimer.timer=LAPIC but I'm hesitant to use local workarounds in case they become pessimistic in the future. I'm not sure all of my systems would have the same free irqs (including after potential addition of expansion cards) so it might be a pain to determine an appropriate allowed_irqs setting for each. I tried hint.hpet.0.allowed_irqs="0x00000000" for the sake of experiment and that just results in LAPIC being used since HPET is removed from kern.eventtimer.choice. I've attached a verbose dmesg (will probably be stripped from the list, hence the Cc:). Is there a limit to how high the irq can be set or could I perhaps set it high enough that it is unlikely to conflict with other hardware? Is there a chance we can find an automatic fix for this issue, or should I just stick with LAPIC at the expense of whatever the HPET event timer gets me? Or something else? I feel the partially random load average level makes it difficult to measure a low load and can be misleading during problem debugging. Thanks. PID USERNAME VCSW IVCSW READ WRITE FAULT TOTAL PERCENT COMMAND 11 root 127 0 0 0 0 0 0.00% intr{irq20: hpet0 uhc} 11 root 74 0 0 0 0 0 0.00% intr{swi4: clock} 0 root 30 0 0 0 0 0 0.00% kernel{em0 que} 13 root 20 0 0 0 0 0 0.00% yarrow 11 root 10 0 0 0 0 0 0.00% intr{swi4: clock} 11 root 8 0 0 0 0 0 0.00% intr{swi4: clock} 11 root 5 0 0 0 0 0 0.00% intr{swi4: clock} Proc: Interrupts r p d s w Csw Trp Sys Int Sof Flt cow 83 total 24 306 4 128 83 54 zfod uart0 4 ozfod mpt0 16 0.0%Sys 0.0%Intr 0.0%User 0.0%Nice 100%Idle %ozfod mpt1 17 | | | | | | | | | | | daefr mpt3 18 prcfr mpt4 19 dtbuf totfr 66 hpet0 uhci --reI/iBAAp9kzkmX4 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg-verbose-ike2.txt" Table 'FACP' at 0xdffc0290 Table 'APIC' at 0xdffc0390 APIC: Found table at 0xdffc0390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 4 ACPI ID 2: enabled SMP: Added CPU 4 (AP) MADT: Found CPU APIC ID 1 ACPI ID 3: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 5 ACPI ID 4: enabled SMP: Added CPU 5 (AP) MADT: Found CPU APIC ID 2 ACPI ID 5: enabled SMP: Added CPU 2 (AP) MADT: Found CPU APIC ID 6 ACPI ID 6: enabled SMP: Added CPU 6 (AP) MADT: Found CPU APIC ID 3 ACPI ID 7: enabled SMP: Added CPU 3 (AP) MADT: Found CPU APIC ID 7 ACPI ID 8: enabled SMP: Added CPU 7 (AP) Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-PRERELEASE #4: Sun Aug 5 18:42:03 EDT 2012 root@chavez2:/usr/obj/usr/src/sys/AMD64-9 amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8103a000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff8103a220. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff8103a8c8. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff8103aef8. Calibrating TSC clock ... TSC clock: 2327548482 Hz CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2327.55-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages) 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) 0x000000000106e000 - 0x00000000dffaffff, 3740540928 bytes (913218 pages) 0x00000000dffbe000 - 0x00000000dffbffff, 8192 bytes (2 pages) 0x0000000100000000 - 0x000000020fff9fff, 4563378176 bytes (1114106 pages) avail memory = 8234450944 (7852 MB) INTR: Adding local APIC 0 as a target Event timer "LAPIC" quality 400 ACPI APIC Table: <A M I APIC0917> INTR: Adding local APIC 0 as a target INTR: Adding local APIC 1 as a target INTR: Adding local APIC 2 as a target INTR: Adding local APIC 3 as a target INTR: Adding local APIC 4 as a target INTR: Adding local APIC 5 as a target INTR: Adding local APIC 6 as a target INTR: Adding local APIC 7 as a target FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000 x86bios: SSEG 0x098000-0x098fff at 0xffffff800024a000 x86bios: EBDA 0x09c000-0x09ffff at 0xfffffe000009c000 x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 3 APIC: CPU 2 has ACPI ID 5 APIC: CPU 3 has ACPI ID 7 APIC: CPU 4 has ACPI ID 2 APIC: CPU 5 has ACPI ID 4 APIC: CPU 6 has ACPI ID 6 APIC: CPU 7 has ACPI ID 8 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ULE: setup cpu 4 ULE: setup cpu 5 ULE: setup cpu 6 ULE: setup cpu 7 ACPI: RSDP 0xfa680 00024 (v02 ACPIAM) ACPI: XSDT 0xdffc0100 0008C (v01 A M I XSDT0917 03000903 MSFT 00000097) ACPI: FACP 0xdffc0290 000F4 (v03 A M I FACP0917 03000903 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000420/0x0 (20110527/tbfadt-586) ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20110527/tbfadt-638) ACPI: DSDT 0xdffc04f0 04BBD (v01 1ADQW 1ADQW060 00000060 INTL 20051117) ACPI: FACS 0xdffce000 00040 ACPI: APIC 0xdffc0390 000C8 (v01 A M I APIC0917 03000903 MSFT 00000097) ACPI: SPCR 0xdffc0460 00050 (v01 A M I SPCR0917 03000903 MSFT 00000097) ACPI: MCFG 0xdffc04b0 0003C (v01 A M I OEMMCFG 03000903 MSFT 00000097) ACPI: SSDT 0xdffc50b0 0002A (v01 OEM_ID OEMTBLID 00000001 INTL 20051117) ACPI: OEMB 0xdffce040 00061 (v01 A M I OEMB0917 03000903 MSFT 00000097) ACPI: HPET 0xdffc50e0 00038 (v01 A M I OEMHPET 03000903 MSFT 00000097) ACPI: TCPA 0xdffc5120 00032 (v01 A M I TBLOEMID 00000001 MSFT 00000097) ACPI: SSDT 0xdffe1e10 01259 (v01 DpgPmm CpuPm 00000012 INTL 20051117) ACPI: EINJ 0xdffc5160 00130 (v01 AMIER AMI_EINJ 03000903 MSFT 00000097) ACPI: BERT 0xdffc52f0 00030 (v01 AMIER AMI_BERT 03000903 MSFT 00000097) ACPI: ERST 0xdffc5320 001B0 (v01 AMIER AMI_ERST 03000903 MSFT 00000097) ACPI: HEST 0xdffc54d0 000A8 (v01 AMIER AMI_HEST 03000903 MSFT 00000097) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic4: Routing NMI -> LINT1 lapic4: LINT1 trigger: edge lapic4: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high lapic5: Routing NMI -> LINT1 lapic5: LINT1 trigger: edge lapic5: LINT1 polarity: high lapic2: Routing NMI -> LINT1 lapic2: LINT1 trigger: edge lapic2: LINT1 polarity: high lapic6: Routing NMI -> LINT1 lapic6: LINT1 trigger: edge lapic6: LINT1 polarity: high lapic3: Routing NMI -> LINT1 lapic3: LINT1 trigger: edge lapic3: LINT1 polarity: high lapic7: Routing NMI -> LINT1 lapic7: LINT1 trigger: edge lapic7: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Event-channel device installed. snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 nfslock: pseudo-device null: <null device, zero device> random: <entropy source, Software, Yarrow> module_register_init: MOD_LOAD (vesa, 0xffffffff807e3530, 0) error 19 kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> acpi0: <A M I XSDT0917> on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: Executed 1 blocks of module-level executable AML code acpi0: Power Button (fixed) unknown: I/O range not supported acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, dff00000 (3) failed cpu0: Processor \\_PR_.CPU1 (ACPI ID 1) -> APIC ID 0 cpu0: <ACPI CPU> on acpi0 ACPI Warning: Incorrect checksum in table [OEMB] - 0x32, should be 0x2F (20110527/tbutils-282) ACPI: SSDT 0xdffe1380 00630 (v01 PmRef P001Cst 00003001 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00630 (v01 PmRef P001Cst 00003001 INTL 20051117) cpu1: Processor \\_PR_.CPU2 (ACPI ID 2) -> APIC ID 4 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xdffe19b0 0009C (v01 PmRef P002Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0009C (v01 PmRef P002Cst 00003000 INTL 20051117) cpu2: Processor \\_PR_.CPU3 (ACPI ID 3) -> APIC ID 1 cpu2: <ACPI CPU> on acpi0 ACPI: SSDT 0xdffe1a50 0009C (v01 PmRef P003Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0009C (v01 PmRef P003Cst 00003000 INTL 20051117) cpu3: Processor \\_PR_.CPU4 (ACPI ID 4) -> APIC ID 5 cpu3: <ACPI CPU> on acpi0 ACPI: SSDT 0xdffe1af0 0009C (v01 PmRef P004Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0009C (v01 PmRef P004Cst 00003000 INTL 20051117) cpu4: Processor \\_PR_.CPU5 (ACPI ID 5) -> APIC ID 2 cpu4: <ACPI CPU> on acpi0 ACPI: SSDT 0xdffe1b90 0009C (v01 PmRef P005Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0009C (v01 PmRef P005Cst 00003000 INTL 20051117) cpu5: Processor \\_PR_.CPU6 (ACPI ID 6) -> APIC ID 6 cpu5: <ACPI CPU> on acpi0 ACPI: SSDT 0xdffe1c30 0009C (v01 PmRef P006Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0009C (v01 PmRef P006Cst 00003000 INTL 20051117) cpu6: Processor \\_PR_.CPU7 (ACPI ID 7) -> APIC ID 3 cpu6: <ACPI CPU> on acpi0 ACPI: SSDT 0xdffe1cd0 0009C (v01 PmRef P007Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0009C (v01 PmRef P007Cst 00003000 INTL 20051117) cpu7: Processor \\_PR_.CPU8 (ACPI ID 8) -> APIC ID 7 cpu7: <ACPI CPU> on acpi0 ACPI: SSDT 0xdffe1d70 0009C (v01 PmRef P008Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 0009C (v01 PmRef P008Cst 00003000 INTL 20051117) attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic hpet0: t1: irqs 0x00f00000 (0) hpet0: t2: irqs 0x00f00800 (0) Timecounter "HPET" frequency 14318180 Hz quality 950 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 6 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 6 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xca1 pcib0: decoding 4 range 0xca4-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xd0000-0xdffff pcib0: decoding 3 range 0xe0000000-0xffbfffff pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x25d8, revid=0xb1 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x25e2, revid=0xb1 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x25e3, revid=0xb1 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x25f8, revid=0xb1 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x25e5, revid=0xb1 domain=0, bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x25f9, revid=0xb1 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x25e7, revid=0xb1 domain=0, bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x25f0, revid=0xb1 domain=0, bus=0, slot=16, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25f0, revid=0xb1 domain=0, bus=0, slot=16, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25f0, revid=0xb1 domain=0, bus=0, slot=16, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25f1, revid=0xb1 domain=0, bus=0, slot=17, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25f3, revid=0xb1 domain=0, bus=0, slot=19, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25f5, revid=0xb1 domain=0, bus=0, slot=21, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x25f6, revid=0xb1 domain=0, bus=0, slot=22, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2690, revid=0x09 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2688, revid=0x09 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=6 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled pcib0: allocated type 4 (0xd800-0xd81f) for rid 20 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2689, revid=0x09 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled pcib0: allocated type 4 (0xd400-0xd41f) for rid 20 of pci0:0:29:1 pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 23 found-> vendor=0x8086, dev=0x268a, revid=0x09 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled pcib0: allocated type 4 (0xd000-0xd01f) for rid 20 of pci0:0:29:2 pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 20 found-> vendor=0x8086, dev=0x268b, revid=0x09 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=7 map[20]: type I/O Port, range 32, base 0xcc00, size 5, enabled pcib0: allocated type 4 (0xcc00-0xcc1f) for rid 20 of pci0:0:29:3 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 21 found-> vendor=0x8086, dev=0x268c, revid=0x09 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=6 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfdfff800, size 10, enabled pcib0: allocated type 3 (0xfdfff800-0xfdfffbff) for rid 10 of pci0:0:29:7 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x244e, revid=0xd9 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x1b (6750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2670, revid=0x09 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x269e, revid=0x09 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1 map[20]: type I/O Port, range 32, base 0xfff0, size 4, enabled found-> vendor=0x8086, dev=0x2681, revid=0x09 domain=0, bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xec00, size 3, enabled pcib0: allocated type 4 (0xec00-0xec07) for rid 10 of pci0:0:31:2 map[14]: type I/O Port, range 32, base 0xe800, size 2, enabled pcib0: allocated type 4 (0xe800-0xe803) for rid 14 of pci0:0:31:2 map[18]: type I/O Port, range 32, base 0xe400, size 3, enabled pcib0: allocated type 4 (0xe400-0xe407) for rid 18 of pci0:0:31:2 map[1c]: type I/O Port, range 32, base 0xe000, size 2, enabled pcib0: allocated type 4 (0xe000-0xe003) for rid 1c of pci0:0:31:2 map[20]: type I/O Port, range 32, base 0xdc00, size 5, enabled pcib0: allocated type 4 (0xdc00-0xdc1f) for rid 20 of pci0:0:31:2 map[24]: type Memory, range 32, base 0xfdfffc00, size 10, enabled pcib0: allocated type 3 (0xfdfffc00-0xfdffffff) for rid 24 of pci0:0:31:2 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x269b, revid=0x09 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0141, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[20]: type I/O Port, range 32, base 0x300, size 5, enabled pcib0: allocated type 4 (0x300-0x31f) for rid 20 of pci0:0:31:3 pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 22 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib0: allocated type 4 (0x6000-0x7fff) for rid 1c of pcib1 pcib0: allocated type 3 (0xfba00000-0xfc0fffff) for rid 20 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 6 pcib1: I/O decode 0x6000-0x7fff pcib1: memory decode 0xfba00000-0xfc0fffff pcib1: no prefetched decode pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0x3500, revid=0x01 domain=0, bus=1, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x350c, revid=0x01 domain=0, bus=1, slot=0, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pcib1: allocated I/O port range (0x6000-0x7fff) for rid 1c of pcib2 pcib1: allocated memory range (0xfba00000-0xfc0fffff) for rid 20 of pcib2 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 5 pcib2: I/O decode 0x6000-0x7fff pcib2: memory decode 0xfba00000-0xfc0fffff pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x8086, dev=0x3510, revid=0x01 domain=0, bus=2, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x3518, revid=0x01 domain=0, bus=2, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pcib2: allocated I/O port range (0x6000-0x6fff) for rid 1c of pcib3 pcib2: allocated memory range (0xfba00000-0xfbffffff) for rid 20 of pcib3 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 4 pcib3: I/O decode 0x6000-0x6fff pcib3: memory decode 0xfba00000-0xfbffffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x10b5, dev=0x8114, revid=0xbc domain=0, bus=3, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0157, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfbffe000, size 13, enabled pcib3: allocated memory range (0xfbffe000-0xfbffffff) for rid 10 of pci0:3:0:0 pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 pcib4: <PCI-PCI bridge> mem 0xfbffe000-0xfbffffff irq 16 at device 0.0 on pci3 pcib3: allocated I/O port range (0x6000-0x6fff) for rid 1c of pcib4 pcib3: allocated memory range (0xfba00000-0xfbefffff) for rid 20 of pcib4 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x6000-0x6fff pcib4: memory decode 0xfba00000-0xfbefffff pcib4: no prefetched decode pci4: <PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x1000, dev=0x0030, revid=0x08 domain=0, bus=4, slot=8, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x06 (1500 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0x6800, size 8, enabled pcib4: allocated I/O port range (0x6800-0x68ff) for rid 10 of pci0:4:8:0 map[14]: type Memory, range 64, base 0xfbee0000, size 17, enabled pcib4: allocated memory range (0xfbee0000-0xfbefffff) for rid 14 of pci0:4:8:0 map[1c]: type Memory, range 64, base 0xfbec0000, size 17, enabled pcib4: allocated memory range (0xfbec0000-0xfbedffff) for rid 1c of pci0:4:8:0 pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 pcib4: slot 8 INTA is routed to irq 16 found-> vendor=0x1000, dev=0x0030, revid=0x08 domain=0, bus=4, slot=8, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x06 (1500 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0x6400, size 8, enabled pcib4: allocated I/O port range (0x6400-0x64ff) for rid 10 of pci0:4:8:1 map[14]: type Memory, range 64, base 0xfbea0000, size 17, enabled pcib4: allocated memory range (0xfbea0000-0xfbebffff) for rid 14 of pci0:4:8:1 map[1c]: type Memory, range 64, base 0xfbe80000, size 17, enabled pcib4: allocated memory range (0xfbe80000-0xfbe9ffff) for rid 1c of pci0:4:8:1 pcib3: matched entry for 3.0.INTB pcib3: slot 0 INTB hardwired to IRQ 17 pcib4: slot 8 INTB is routed to irq 17 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x6800-0x68ff mem 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff irq 16 at device 8.0 on pci4 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 mpt0: MPI Version=1.2.14.0 mpt0: chain depth limited to 48 (from 2550) mpt0: Maximum Segment Count: 336, Maximum CAM Segment Count: 33 mpt0: MsgLength=15 IOCNumber = 0 mpt0: IOCFACTS: GlobalCredits=255 BlockSize=8 bytes Request Frame Size 96 bytes Max Chain Depth 48 mpt0: IOCFACTS: Num Ports 1, FWImageSize 40752, Flags=0 mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x6400-0x64ff mem 0xfbea0000-0xfbebffff,0xfbe80000-0xfbe9ffff irq 17 at device 8.1 on pci4 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53 mpt1: MPI Version=1.2.14.0 mpt1: chain depth limited to 48 (from 2550) mpt1: Maximum Segment Count: 336, Maximum CAM Segment Count: 33 mpt1: MsgLength=15 IOCNumber = 1 mpt1: IOCFACTS: GlobalCredits=255 BlockSize=8 bytes Request Frame Size 96 bytes Max Chain Depth 48 mpt1: IOCFACTS: Num Ports 1, FWImageSize 40752, Flags=0 mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2 pcib2: allocated I/O port range (0x7000-0x7fff) for rid 1c of pcib5 pcib2: allocated memory range (0xfc000000-0xfc0fffff) for rid 20 of pcib5 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x7000-0x7fff pcib5: memory decode 0xfc000000-0xfc0fffff pcib5: no prefetched decode pci5: <ACPI PCI bus> on pcib5 pci5: domain=0, physical bus=5 found-> vendor=0x8086, dev=0x1096, revid=0x01 domain=0, bus=5, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfc0e0000, size 17, enabled pcib5: allocated memory range (0xfc0e0000-0xfc0fffff) for rid 10 of pci0:5:0:0 map[18]: type I/O Port, range 32, base 0x7c00, size 5, enabled pcib5: allocated I/O port range (0x7c00-0x7c1f) for rid 18 of pci0:5:0:0 pcib5: matched entry for 5.0.INTA pcib5: slot 0 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x1096, revid=0x01 domain=0, bus=5, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfc0c0000, size 17, enabled pcib5: allocated memory range (0xfc0c0000-0xfc0dffff) for rid 10 of pci0:5:0:1 map[18]: type I/O Port, range 32, base 0x7800, size 5, enabled pcib5: allocated I/O port range (0x7800-0x781f) for rid 18 of pci0:5:0:1 pcib5: matched entry for 5.0.INTB pcib5: slot 0 INTB hardwired to IRQ 19 em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x7c00-0x7c1f mem 0xfc0e0000-0xfc0fffff irq 18 at device 0.0 on pci5 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 54 em0: using IRQ 256 for MSI em0: Using an MSI interrupt em0: bpf attached em0: Ethernet address: 00:1b:24:f0:7d:6c em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x7800-0x781f mem 0xfc0c0000-0xfc0dffff irq 19 at device 0.1 on pci5 em1: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 55 em1: using IRQ 257 for MSI em1: Using an MSI interrupt em1: bpf attached em1: Ethernet address: 00:1b:24:f0:7d:6d pcib6: <PCI-PCI bridge> at device 0.3 on pci1 pcib6: domain 0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: no prefetched decode pci6: <PCI bus> on pcib6 pci6: domain=0, physical bus=6 pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib7: domain 0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: no prefetched decode pcib7: could not get PCI interrupt routing table for \\_SB_.PCI0.NPE3 - AE_NOT_FOUND pci7: <ACPI PCI bus> on pcib7 pci7: domain=0, physical bus=7 pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pcib0: allocated type 4 (0x8000-0x8fff) for rid 1c of pcib8 pcib0: allocated type 3 (0xfc100000-0xfc5fffff) for rid 20 of pcib8 pcib8: domain 0 pcib8: secondary bus 8 pcib8: subordinate bus 8 pcib8: I/O decode 0x8000-0x8fff pcib8: memory decode 0xfc100000-0xfc5fffff pcib8: no prefetched decode pci8: <ACPI PCI bus> on pcib8 pci8: domain=0, physical bus=8 found-> vendor=0x1000, dev=0x0058, revid=0x04 domain=0, bus=8, slot=0, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0147, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 1 message in map 0x14 map[10]: type I/O Port, range 32, base 0x8800, size 8, enabled pcib8: allocated I/O port range (0x8800-0x88ff) for rid 10 of pci0:8:0:0 map[14]: type Memory, range 64, base 0xfc5fc000, size 14, enabled pcib8: allocated memory range (0xfc5fc000-0xfc5fffff) for rid 14 of pci0:8:0:0 map[1c]: type Memory, range 64, base 0xfc5e0000, size 16, enabled pcib8: allocated memory range (0xfc5e0000-0xfc5effff) for rid 1c of pci0:8:0:0 pcib8: matched entry for 8.0.INTA pcib8: slot 0 INTA hardwired to IRQ 17 mpt2: <LSILogic SAS/SATA Adapter> port 0x8800-0x88ff mem 0xfc5fc000-0xfc5fffff,0xfc5e0000-0xfc5effff irq 17 at device 0.0 on pci8 mpt2: attempting to allocate 1 MSI-X vectors (1 supported) msi: routing MSI-X IRQ 258 to local APIC 0 vector 56 mpt2: using IRQ 258 for MSI-X mpt2: MPI Version=1.5.20.0 mpt2: chain depth limited to 34 (from 2040) mpt2: Maximum Segment Count: 306, Maximum CAM Segment Count: 33 mpt2: MsgLength=20 IOCNumber = 0 mpt2: IOCFACTS: GlobalCredits=277 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34 mpt2: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2 mpt2: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). mpt2: Capabilities: ( RAID-0 RAID-1E RAID-1 ) mpt2: 0 Active Volumes (2 Max) mpt2: 0 Hidden Drive Members (14 Max) mpt2: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pcib9: domain 0 pcib9: secondary bus 9 pcib9: subordinate bus 9 pcib9: no prefetched decode pci9: <ACPI PCI bus> on pcib9 pci9: domain=0, physical bus=9 pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pcib0: allocated type 4 (0x9000-0x9fff) for rid 1c of pcib10 pcib0: allocated type 3 (0xfc600000-0xfcbfffff) for rid 20 of pcib10 pcib10: domain 0 pcib10: secondary bus 10 pcib10: subordinate bus 11 pcib10: I/O decode 0x9000-0x9fff pcib10: memory decode 0xfc600000-0xfcbfffff pcib10: no prefetched decode pci10: <ACPI PCI bus> on pcib10 pci10: domain=0, physical bus=10 found-> vendor=0x10b5, dev=0x8114, revid=0xbc domain=0, bus=10, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0157, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfcbfe000, size 13, enabled pcib10: allocated memory range (0xfcbfe000-0xfcbfffff) for rid 10 of pci0:10:0:0 pcib10: matched entry for 10.0.INTA pcib10: slot 0 INTA hardwired to IRQ 18 pcib11: <PCI-PCI bridge> mem 0xfcbfe000-0xfcbfffff irq 18 at device 0.0 on pci10 pcib10: allocated I/O port range (0x9000-0x9fff) for rid 1c of pcib11 pcib10: allocated memory range (0xfc600000-0xfcafffff) for rid 20 of pcib11 pcib11: domain 0 pcib11: secondary bus 11 pcib11: subordinate bus 11 pcib11: I/O decode 0x9000-0x9fff pcib11: memory decode 0xfc600000-0xfcafffff pcib11: no prefetched decode pci11: <PCI bus> on pcib11 pci11: domain=0, physical bus=11 found-> vendor=0x1000, dev=0x0030, revid=0x08 domain=0, bus=11, slot=8, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x06 (1500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0x9800, size 8, enabled pcib11: allocated I/O port range (0x9800-0x98ff) for rid 10 of pci0:11:8:0 map[14]: type Memory, range 64, base 0xfcae0000, size 17, enabled pcib11: allocated memory range (0xfcae0000-0xfcafffff) for rid 14 of pci0:11:8:0 map[1c]: type Memory, range 64, base 0xfcac0000, size 17, enabled pcib11: allocated memory range (0xfcac0000-0xfcadffff) for rid 1c of pci0:11:8:0 pcib10: matched entry for 10.0.INTA pcib10: slot 0 INTA hardwired to IRQ 18 pcib11: slot 8 INTA is routed to irq 18 found-> vendor=0x1000, dev=0x0030, revid=0x08 domain=0, bus=11, slot=8, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x06 (1500 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type I/O Port, range 32, base 0x9400, size 8, enabled pcib11: allocated I/O port range (0x9400-0x94ff) for rid 10 of pci0:11:8:1 map[14]: type Memory, range 64, base 0xfcaa0000, size 17, enabled pcib11: allocated memory range (0xfcaa0000-0xfcabffff) for rid 14 of pci0:11:8:1 map[1c]: type Memory, range 64, base 0xfca80000, size 17, enabled pcib11: allocated memory range (0xfca80000-0xfca9ffff) for rid 1c of pci0:11:8:1 pcib10: matched entry for 10.0.INTB pcib10: slot 0 INTB hardwired to IRQ 19 pcib11: slot 8 INTB is routed to irq 19 mpt3: <LSILogic 1030 Ultra4 Adapter> port 0x9800-0x98ff mem 0xfcae0000-0xfcafffff,0xfcac0000-0xfcadffff irq 18 at device 8.0 on pci11 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 57 mpt3: MPI Version=1.2.14.0 mpt3: chain depth limited to 48 (from 2550) mpt3: Maximum Segment Count: 336, Maximum CAM Segment Count: 33 mpt3: MsgLength=15 IOCNumber = 0 mpt3: IOCFACTS: GlobalCredits=255 BlockSize=8 bytes Request Frame Size 96 bytes Max Chain Depth 48 mpt3: IOCFACTS: Num Ports 1, FWImageSize 40752, Flags=0 mpt3: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt3: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt4: <LSILogic 1030 Ultra4 Adapter> port 0x9400-0x94ff mem 0xfcaa0000-0xfcabffff,0xfca80000-0xfca9ffff irq 19 at device 8.1 on pci11 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 58 mpt4: MPI Version=1.2.14.0 mpt4: chain depth limited to 48 (from 2550) mpt4: Maximum Segment Count: 336, Maximum CAM Segment Count: 33 mpt4: MsgLength=15 IOCNumber = 1 mpt4: IOCFACTS: GlobalCredits=255 BlockSize=8 bytes Request Frame Size 96 bytes Max Chain Depth 48 mpt4: IOCFACTS: Num Ports 1, FWImageSize 40752, Flags=0 mpt4: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt4: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib12: domain 0 pcib12: secondary bus 12 pcib12: subordinate bus 12 pcib12: no prefetched decode pci12: <ACPI PCI bus> on pcib12 pci12: domain=0, physical bus=12 pcib13: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib0: allocated type 4 (0xa000-0xafff) for rid 1c of pcib13 pcib0: allocated type 3 (0xfcc00000-0xfcdfffff) for rid 20 of pcib13 pcib13: domain 0 pcib13: secondary bus 13 pcib13: subordinate bus 13 pcib13: I/O decode 0xa000-0xafff pcib13: memory decode 0xfcc00000-0xfcdfffff pcib13: no prefetched decode pci13: <ACPI PCI bus> on pcib13 pci13: domain=0, physical bus=13 found-> vendor=0x8086, dev=0x105e, revid=0x06 domain=0, bus=13, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfcde0000, size 17, enabled pcib13: allocated memory range (0xfcde0000-0xfcdfffff) for rid 10 of pci0:13:0:0 map[14]: type Memory, range 32, base 0xfcdc0000, size 17, enabled pcib13: allocated memory range (0xfcdc0000-0xfcddffff) for rid 14 of pci0:13:0:0 map[18]: type I/O Port, range 32, base 0xac00, size 5, enabled pcib13: allocated I/O port range (0xac00-0xac1f) for rid 18 of pci0:13:0:0 pcib13: matched entry for 13.0.INTA pcib13: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x105e, revid=0x06 domain=0, bus=13, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfcd80000, size 17, enabled pcib13: allocated memory range (0xfcd80000-0xfcd9ffff) for rid 10 of pci0:13:0:1 map[14]: type Memory, range 32, base 0xfcd60000, size 17, enabled pcib13: allocated memory range (0xfcd60000-0xfcd7ffff) for rid 14 of pci0:13:0:1 map[18]: type I/O Port, range 32, base 0xa800, size 5, enabled pcib13: allocated I/O port range (0xa800-0xa81f) for rid 18 of pci0:13:0:1 pcib13: matched entry for 13.0.INTB pcib13: slot 0 INTB hardwired to IRQ 17 em2: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xac00-0xac1f mem 0xfcde0000-0xfcdfffff,0xfcdc0000-0xfcddffff irq 16 at device 0.0 on pci13 em2: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 259 to local APIC 0 vector 59 em2: using IRQ 259 for MSI em2: Using an MSI interrupt em2: bpf attached em2: Ethernet address: 00:1b:24:f0:7d:6e em3: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xa800-0xa81f mem 0xfcd80000-0xfcd9ffff,0xfcd60000-0xfcd7ffff irq 17 at device 0.1 on pci13 em3: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 260 to local APIC 0 vector 60 em3: using IRQ 260 for MSI em3: Using an MSI interrupt em3: bpf attached em3: Ethernet address: 00:1b:24:f0:7d:6f uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xd800-0xd81f irq 22 at device 29.0 on pci0 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 61 uhci0: LegSup = 0x2f00 usbus0 on uhci0 uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xd400-0xd41f irq 23 at device 29.1 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 62 uhci1: LegSup = 0x2f00 usbus1 on uhci1 uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xd000-0xd01f irq 20 at device 29.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xcc00-0xcc1f irq 21 at device 29.3 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 63 uhci3: LegSup = 0x2f00 usbus3 on uhci3 ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfdfff800-0xfdfffbff irq 22 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib14 pcib0: allocated type 3 (0xfce00000-0xfdefffff) for rid 20 of pcib14 pcib14: domain 0 pcib14: secondary bus 14 pcib14: subordinate bus 14 pcib14: I/O decode 0xb000-0xbfff pcib14: memory decode 0xfce00000-0xfdefffff pcib14: no prefetched decode pcib14: Subtractively decoded bridge. pci14: <ACPI PCI bus> on pcib14 pci14: domain=0, physical bus=14 found-> vendor=0x1a03, dev=0x2000, revid=0x00 domain=0, bus=14, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfd000000, size 23, enabled pcib14: allocated memory range (0xfd000000-0xfd7fffff) for rid 10 of pci0:14:5:0 map[14]: type Memory, range 32, base 0xfdee0000, size 17, enabled pcib14: allocated memory range (0xfdee0000-0xfdefffff) for rid 14 of pci0:14:5:0 map[18]: type I/O Port, range 32, base 0xbc00, size 7, enabled pcib14: allocated I/O port range (0xbc00-0xbc7f) for rid 18 of pci0:14:5:0 pcib14: matched entry for 14.5.INTA pcib14: slot 5 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfd000000-0xfd7fffff,0xfdee0000-0xfdefffff irq 16 at device 5.0 on pci14 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 at device 31.1 on pci0 pcib0: allocated type 4 (0x1000-0x100f) for rid 20 of atapci0 atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0x1000 ata0: <ATA channel> at channel 0 on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 64 ahci0: <Intel ESB2 AHCI SATA controller> port 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc1f mem 0xfdfffc00-0xfdffffff irq 21 at device 31.2 on pci0 ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported ahci0: Caps: 64bit NCQ ALP AL 3Gbps SSC PSC 32cmd 6ports ahci0: Caps2: ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: Caps: ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: Caps: ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich2: Caps: ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich3: Caps: ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich4: Caps: ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich5: Caps: pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 65 uart1: fast interrupt uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 66 uart0: fast interrupt acpi0: wakeup code va 0xffffff8423240000 pa 0x90000 pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 4 of orm0 pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 4 of orm0 pcib0: allocated type 3 (0xd0800-0xd17ff) for rid 4 of orm0 pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 5 of orm0 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 5 of orm0 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 5 of orm0 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 5 of orm0 pcib0: allocated type 3 (0xda800-0xdafff) for rid 5 of orm0 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 5 of orm0 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 5 of orm0 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 5 of orm0 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 5 of orm0 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 5 of orm0 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 5 of orm0 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 5 of orm0 pcib0: allocated type 3 (0xde800-0xdefff) for rid 5 of orm0 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 5 of orm0 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 5 of orm0 isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it uart: uart1 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xc67ff,0xc6800-0xc77ff,0xc7800-0xc87ff,0xce800-0xcf7ff,0xd0800-0xd17ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: CGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 pcib0: allocated type 4 (0x3d0-0x3db) for rid 0 of vga0 pcib0: allocated type 3 (0xb8000-0xbffff) for rid 0 of vga0 pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0 pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0 pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 67 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x410 Device configuration finished. procfs registered ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining pflog0: bpf attached lo0: bpf attached usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 (noperiph:mpt0:0:-1:-1): reset bus ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered (noperiph:mpt1:0:-1:-1): reset bus (noperiph:mpt3:0:-1:-1): reset bus (noperiph:mpt4:0:-1:-1): reset bus ata0: reset tp1 mask=03 ostat0=7f ostat1=00 ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x0 ahcich0: AHCI reset... ahcich0: SATA connect timeout time=10000us status=00000000 ahcich0: AHCI reset: device not found ahcich1: AHCI reset... ahcich1: SATA connect timeout time=10000us status=00000000 ahcich1: AHCI reset: device not found ahcich2: AHCI reset... ahcich2: SATA connect timeout time=10000us status=00000000 ahcich2: AHCI reset: device not found ahcich3: AHCI reset... ahcich3: SATA connect timeout time=10000us status=00000000 ahcich3: AHCI reset: device not found ahcich4: AHCI reset... ahcich4: SATA connect timeout time=10000us status=00000000 ahcich4: AHCI reset: device not found ahcich5: AHCI reset... ahcich5: SATA connect timeout time=10000us status=00000000 ahcich5: AHCI reset: device not found uhub4: 8 ports with 8 removable, self powered GEOM: new disk da0 da8 at mpt3 bus 0 scbus4 target 0 lun 0 da8: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da8: Serial Number 091AD57C57DAA100 da8: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da8: Command Queueing enabled da8: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da9 at mpt3 bus 0 scbus4 target 0 lun 1 da9: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da9: Serial Number 091AD54757FFF800 da9: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da9: Command Queueing enabled da9: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da10 at mpt3 bus 0 scbus4 target 0 lun 2 da10: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da10: Serial Number 091AD568F2ABAD00 da10: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da10: Command Queueing enabled da10: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da11 at mpt3 bus 0 scbus4 target 0 lun 3 da11: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da11: Serial Number 091AD52AF8D1F900 da11: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da11: Command Queueing enabled da11: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da12 at mpt3 bus 0 scbus4 target 0 lun 4 da12: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da12: Serial Number 091AD561DFF19C00 da12: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da12: Command Queueing enabled da12: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da13 at mpt3 bus 0 scbus4 target 0 lun 5 da13: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da13: Serial Number 091AD56B4B606800 da13: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da13: Command Queueing enabled da13: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da14 at mpt3 bus 0 scbus4 target 0 lun 6 da14: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da14: Serial Number 091AD52B0A15DD00 da14: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da14: Command Queueing enabled da14: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da0 at mpt2 bus 0 scbus2 target 0 lun 0 da0: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da0: Serial Number 0394G5TY 3NM4G5TY da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da2 at mpt2 bus 0 scbus2 target 2 lun 0 da2: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da2: Serial Number 11952BEZ 3NM52BEZ da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da3 at mpt2 bus 0 scbus2 target 3 lun 0 da3: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da3: Serial Number 449814DD 3NM814DD da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da6 at mpt2 bus 0 scbus2 target 6 lun 0 da6: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da6: Serial Number 0794S0M2 3NM4S0M2 da6: 300.000MB/s transfers da6: Command Queueing enabled da6: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da1 at mpt2 bus 0 scbus2 target 1 lun 0 da1: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da1: Serial Number 0394F1BA 3NM4F1BA da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da5 at mpt2 bus 0 scbus2 target 5 lun 0 da5: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da5: Serial Number 0794RL0S 3NM4RL0S da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da7 at mpt2 bus 0 scbus2 target 7 lun 0 da7: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da7: Serial Number 0794LMPR 3NM4LMPR da7: 300.000MB/s transfers da7: Command Queueing enabled da7: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da4 at mpt2 bus 0 scbus2 target 4 lun 0 da4: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device da4: Serial Number 0794RZ5X 3NM4RZ5X da4: 300.000MB/s transfers da4: Command Queueing enabled da4: 140009MB (286739329 512 byte sectors: 255H 63S/T 17848C) da15 at mpt3 bus 0 scbus4 target 0 lun 7 da15: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da15: Serial Number 091AD5233EE83300 da15: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da15: Command Queueing enabled da15: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da16 at mpt4 bus 0 scbus5 target 0 lun 0 da16: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da16: Serial Number 091AD574DA09BC00 da16: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da16: Command Queueing enabled da16: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da17 at mpt4 bus 0 scbus5 target 0 lun 1 da17: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da17: Serial Number 091AD576D9211500 da17: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da17: Command Queueing enabled da17: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da18 at mpt4 bus 0 scbus5 target 0 lun 2 da18: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da18: Serial Number 091AD54979445700 da18: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da18: Command Queueing enabled da18: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da19 at mpt4 bus 0 scbus5 target 0 lun 3 da19: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da19: Serial Number 091AD5726CD60500 da19: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da19: Command Queueing enabled da19: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da20 at mpt4 bus 0 scbus5 target 0 lun 4 da20: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da20: Serial Number 091AD56BEA6A1900 da20: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da20: Command Queueing enabled da20: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da21 at mpt4 bus 0 scbus5 target 0 lun 5 da21: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da21: Serial Number 091AD518015A3E00 da21: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da21: Command Queueing enabled da21: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da22 at mpt4 bus 0 scbus5 target 0 lun 6 da22: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da22: Serial Number 091AD54DCAB1D100 da22: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da22: Command Queueing enabled da22: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) da23 at mpt4 bus 0 scbus5 target 0 lun 7 da23: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device da23: Serial Number 091AD56B5804EC00 da23: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) da23: Command Queueing enabled da23: 476679MB (976238592 512 byte sectors: 255H 63S/T 60768C) pass0 at mpt2 bus 0 scbus2 target 0 lun 0 pass0: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass0: Serial Number 0394G5TY 3NM4G5TY pass0: 300.000MB/s transfers pass0: Command Queueing enabled pass1 at mpt2 bus 0 scbus2 target 1 lun 0 pass1: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass1: Serial Number 0394F1BA 3NM4F1BA pass1: 300.000MB/s transfers pass1: Command Queueing enabled pass2 at mpt2 bus 0 scbus2 target 2 lun 0 pass2: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass2: Serial Number 11952BEZ 3NM52BEZ pass2: 300.000MB/s transfers pass2: Command Queueing enabled pass3 at mpt2 bus 0 scbus2 target 3 lun 0 pass3: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass3: Serial Number 449814DD 3NM814DD pass3: 300.000MB/s transfers pass3: Command Queueing enabled pass4 at mpt2 bus 0 scbus2 target 4 lun 0 pass4: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass4: Serial Number 0794RZ5X 3NM4RZ5X pass4: 300.000MB/s transfers pass4: Command Queueing enabled pass5 at mpt2 bus 0 scbus2 target 5 lun 0 pass5: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass5: Serial Number 0794RL0S 3NM4RL0S pass5: 300.000MB/s transfers pass5: Command Queueing enabled pass6 at mpt2 bus 0 scbus2 target 6 lun 0 pass6: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass6: Serial Number 0794S0M2 3NM4S0M2 pass6: 300.000MB/s transfers pass6: Command Queueing enabled pass7 at mpt2 bus 0 scbus2 target 7 lun 0 pass7: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SCSI-5 device pass7: Serial Number 0794LMPR 3NM4LMPR pass7: 300.000MB/s transfers pass7: Command Queueing enabled pass8 at mpt3 bus 0 scbus4 target 0 lun 0 pass8: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass8: Serial Number 091AD57C57DAA100 pass8: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass8: Command Queueing enabled pass9 at mpt3 bus 0 scbus4 target 0 lun 1 pass9: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass9: Serial Number 091AD54757FFF800 pass9: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass9: Command Queueing enabled pass10 at mpt3 bus 0 scbus4 target 0 lun 2 pass10: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass10: Serial Number 091AD568F2ABAD00 pass10: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass10: Command Queueing enabled pass11 at mpt3 bus 0 scbus4 target 0 lun 3 pass11: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass11: Serial Number 091AD52AF8D1F900 pass11: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass11: Command Queueing enabled pass12 at mpt3 bus 0 scbus4 target 0 lun 4 pass12: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass12: Serial Number 091AD561DFF19C00 pass12: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass12: Command Queueing enabled pass13 at mpt3 bus 0 scbus4 target 0 lun 5 pass13: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass13: Serial Number 091AD56B4B606800 pass13: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass13: Command Queueing enabled pass14 at mpt3 bus 0 scbus4 target 0 lun 6 pass14: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass14: Serial Number 091AD52B0A15DD00 pass14: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass14: Command Queueing enabled pass15 at mpt3 bus 0 scbus4 target 0 lun 7 pass15: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass15: Serial Number 091AD5233EE83300 pass15: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass15: Command Queueing enabled pass16 at mpt4 bus 0 scbus5 target 0 lun 0 pass16: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device GEOM: new disk da1 GEOM: new disk da2 GEOM: new disk da3 GEOM: new disk da4 GEOM: new disk da5 GEOM: new disk da6 GEOM: new disk da7 GEOM: new disk da8 GEOM: new disk da9 GEOM: new disk da10 GEOM: new disk da11 GEOM: new disk da12 GEOM: new disk da13 GEOM: new disk da14 GEOM: new disk da15 GEOM: new disk da16 GEOM: new disk da17 GEOM: new disk da18 GEOM: new disk da19 GEOM: new disk da20 GEOM: new disk da21 GEOM: new disk da22 GEOM: new disk da23 pass16: Serial Number 091AD574DA09BC00 pass16: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass16: Command Queueing enabled pass17 at mpt4 bus 0 scbus5 target 0 lun 1 pass17: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass17: Serial Number 091AD576D9211500 pass17: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass17: Command Queueing enabled pass18 at mpt4 bus 0 scbus5 target 0 lun 2 pass18: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass18: Serial Number 091AD54979445700 pass18: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass18: Command Queueing enabled pass19 at mpt4 bus 0 scbus5 target 0 lun 3 pass19: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass19: Serial Number 091AD5726CD60500 pass19: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass19: Command Queueing enabled pass20 at mpt4 bus 0 scbus5 target 0 lun 4 pass20: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass20: Serial Number 091AD56BEA6A1900 pass20: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass20: Command Queueing enabled pass21 at mpt4 bus 0 scbus5 target 0 lun 5 pass21: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass21: Serial Number 091AD518015A3E00 pass21: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass21: Command Queueing enabled pass22 at mpt4 bus 0 scbus5 target 0 lun 6 pass22: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass22: Serial Number 091AD54DCAB1D100 pass22: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass22: Command Queueing enabled pass23 at mpt4 bus 0 scbus5 target 0 lun 7 pass23: <IFT A16U-G2421 347J> Fixed Direct Access SCSI-3 device pass23: Serial Number 091AD56B5804EC00 pass23: 320.000MB/s transfers (160.000MHz, offset 127, 16bit) pass23: Command Queueing enabled SMP: AP CPU #7 Launched! cpu7 AP: ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #6 Launched! cpu6 AP: ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #5 Launched! cpu5 AP: ID: 0x05000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #4 Launched! cpu4 AP: ID: 0x04000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 2 vector 48 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 3 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 4 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 5 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 6 vector 48 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 7 vector 48 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 49 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 2 vector 49 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 3 vector 49 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 4 vector 49 msi: Assigning MSI IRQ 256 to local APIC 5 vector 49 msi: Assigning MSI IRQ 257 to local APIC 6 vector 49 msi: Assigning MSI-X IRQ 258 to local APIC 7 vector 49 msi: Assigning MSI IRQ 260 to local APIC 1 vector 50 SMP: passed TSC synchronization test TSC timecounter discards lower 8 bit(s) Timecounter "TSC-low" frequency 9091986 Hz quality 1000 GEOM_MIRROR: Device mirror/swap launched (2/2). Root mount waiting for: usbus4 ugen4.2: <Texas Instruments Incorporated> at usbus4 umass0: <Texas Instruments Incorporated 6250 FW 03.05.02.22.562AD423, class 0/0, rev 2.00/2.00, addr 2> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:13:0:-1: Attached to scbus13 (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? pass24 at umass-sim0 bus 0 scbus13 target 0 lun 0 pass24: <TSSTcorp CD/DVDW TS-T632A SR03> Removable CD-ROM SCSI-0 device pass24: 40.000MB/s transfers GEOM: new disk cd0 cd0 at umass-sim0 bus 0 scbus13 target 0 lun 0 cd0: <TSSTcorp CD/DVDW TS-T632A SR03> Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open ugen4.3: <vendor 0x04b4> at usbus4 uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 3> on usbus4 uhub5: MTT enabled Root mount waiting for: usbus4 uhub5: 4 ports with 4 removable, self powered Trying to mount root from zfs:rpool/ROOT/freebsd-ike2 []... ugen1.2: <American Megatrends Inc.> at usbus1 ukbd0: <Keyboard Interface> on usbus1 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ums0: <Mouse Interface> on usbus1 start_init: trying /sbin/init [20] em0: Link is up 1000 Mbps Full Duplex [20] em0: link state changed to UP --reI/iBAAp9kzkmX4--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120814192540.GV68639>