Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 17 Oct 2003 20:16:04 +0300
From:      Ion-Mihai Tetcu <itetcu@tecnik93.com>
To:        questions@freebsd.org, hardware@freebsd.org
Subject:   mouse and hdd problems with GA-7VT600 (KT600/VT8237)
Message-ID:  <20031017201604.58b0ff0d.itetcu@tecnik93.com>

next in thread | raw e-mail | index | archive | help
Hi,



I've changed my desktop MB from a (Gigabyte) GA-VA (KT400/VT8235)  to
a GA-VT600 1394 (KT400/VT8237)
( http://tw.giga-byte.com/MotherBoard/Products/Products_GA-7VT600%2013
94.htm ).

I've swaped the HDD and the system came up with no problem except:

1. Mouse: 
I have tried an A4 Tech optical mouse (which was working fine with the
old MB) and a Genius NetScroll+, both PS/2, but none seems to be
working(e.g. the cursor just jump or doesn't move). I'll try tomorrow
with a serial mouse. I don't know if it is related with the VT8235.
Getting it to work is more urgent to me that the second issue.

2. The HDD is in PIO4 mode (I'm using a parallel
ATA Seagate HDD, not an S-ATA).

To my surprise the sound and network are working ok.


I've google'd and found the following:
1.
kern/55926 [patch] which was not committed
(reason:
http://lists.freebsd.org/pipermail/freebsd-bugs/2003-August/00
29 29.h tml).


2.
The NetBSD folks seems to have integrated support for the VT8235
(both ATA and SATA):
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/pci/pciide.c
(changes committed in rev. 199, rev. 197, rev. 196)



If anyone has a hint on those .........	Tnx.


The verbose DMESG and the output of pciconf -l -v are below
(Note that I've disabled from BIOS the things I don't use. If someone
whats to me to test them, please say).


0.LNKB irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.14.2\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.14.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.20.0\\_SB_.PCI0.LNKB irq  11: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.20.1\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.20.2\\_SB_.PCI0.LNKD irq   0: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.20.3\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.19.0\\_SB_.PCI0.LNKD irq   0: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.19.1\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.19.2\\_SB_.PCI0.LNKB irq  11: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.19.3\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.8.0\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.8.1\\_SB_.PCI0.LNKD irq   0: [  1
 3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.8.2\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.8.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.16.0\\_SB_.PCI0.LNKB irq  11: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.16.1\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.16.2\\_SB_.PCI0.LNKD irq   0: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.16.3\\_SB_.PCI0.LNKA irq   5: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.17.0\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.17.1\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.17.2\\_SB_.PCI0.LNKD irq   0: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.17.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.1.0\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.1.1\\_SB_.PCI0.LNKC irq  10: [  1
 3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.1.2\\_SB_.PCI0.LNKD irq   0: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.1.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.15.0\\_SB_.PCI0.LNKB irq  11: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.15.1\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.15.2\\_SB_.PCI0.LNKD irq   0: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.15.3---- before setting priority
for links ------------\\_SB_.PCI0.LNKD:
	interrupts:	     1     3     4     5     6     7    10    11    12    14  
 15	penalty:	101430  2430  2430  2730  2430  2430  2730  2730 
2430 11430 11430	references:	13
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.LNKD:
	interrupts:	     1     3     4     5     6     7    10    11    12    14  
 15	penalty:	101430  2430  2430  2730  2430  2430  2730  2730 
2430 11430 11430	references:	13
	priority:	170926
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.9.0\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.9.1\\_SB_.PCI0.LNKD irq  12: [  1
 3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.9.2\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.9.3\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.10.0\\_SB_.PCI0.LNKD irq  12: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.10.1\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.10.2\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.10.3\\_SB_.PCI0.LNKD irq  12: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.11.0\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.11.1\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.11.2\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.11.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.12.0\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.12.1\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.12.2\\_SB_.PCI0.LNKD irq  12: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.12.3\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.13.0\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.13.1\\_SB_.PCI0.LNKD irq  12: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.13.2\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.13.3\\_SB_.PCI0.LNKD irq  12: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.14.0\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.14.1\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.14.2\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.14.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.20.0\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.20.1\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.20.2\\_SB_.PCI0.LNKD irq  12: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.20.3\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.19.0\\_SB_.PCI0.LNKD irq  12: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.19.1\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.19.2\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.19.3\\_SB_.PCI0.LNKB irq  11: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.8.0\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.8.1\\_SB_.PCI0.LNKD irq  12: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.8.2\\_SB_.PCI0.LNKA irq   5: [  1
 3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.8.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.16.0\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.16.1\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.16.2\\_SB_.PCI0.LNKD irq  12: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.16.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.17.0\\_SB_.PCI0.LNKB irq  11: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.17.1\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.17.2\\_SB_.PCI0.LNKD irq  12: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.17.3\\_SB_.PCI0.LNKA irq   5: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.1.0\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.1.1\\_SB_.PCI0.LNKC irq  10: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.1.2\\_SB_.PCI0.LNKD irq  12: [  1
 3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.1.3\\_SB_.PCI0.LNKA irq   5: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.15.0\\_SB_.PCI0.LNKB irq  11: [  1  3  4  5  6  7
10 11 12 14 15] low,level,sharable 0.15.1\\_SB_.PCI0.LNKC irq  10: [ 
1  3  4  5  6  7 10 11 12 14 15] low,level,sharable
0.15.2\\_SB_.PCI0.LNKD irq  12: [  1  3  4  5  6  7 10 11 12 14 15]
low,level,sharable 0.15.3 pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base d0000000, size 27, enabled
found->	vendor=0x1106, dev=0x3189, revid=0x80
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0xb198, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 0000a000, size  8, enabled
	map[14]: type 1, range 32, base e2000000, size  8, enabled
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=13, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000a400, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=15, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x3227, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000b800, size  8, enabled
found->	vendor=0x1106, dev=0x3059, revid=0x60
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000bc00, size  8, enabled
	map[14]: type 1, range 32, base e2002000, size  8, enabled
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=19, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e2003000, size 11, enabled
	map[14]: type 4, range 32, base 0000c000, size  7, enabled
found->	vendor=0x1106, dev=0x3044, revid=0x46
	bus=0, slot=20, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D2 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at
device 0.0 on pci0 agp0: allocating GATT for aperture of size 233M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0x9fff
pcib1:   memory decode     0xe0000000-0xe1ffffff
pcib1:   prefetched decode 0xd8000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base d8000000, size 27, enabled
	map[14]: type 4, range 32, base 00009000, size  8, enabled
	map[18]: type 1, range 32, base e1000000, size 16, enabled
found->	vendor=0x1002, dev=0x4966, revid=0x01
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
drm0: <ATI Radeon If R250 9000> port 0x9000-0x90ff mem
0xe1000000-0xe100ffff,0xd8000000-0xdfffffff irq 5 at device 0.0 on
pci1 info: [drm] AGP at 0xd0000000 128MB
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem
0xe2000000-0xe20000ff irq 11 at device 13.0 on pci0 rl0: Realtek 8139B
detected. Warning, this may be unstable in autoselect mode rl0:
Ethernet address: 00:40:f4:79:6e:59 miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
pci0: <mass storage, ATA> at device 15.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xb800-0xb8ff irq 10 at device 17.5 on pci0
pcm0: <Unknown AC97 Codec (id = 0x414c4760)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, center DAC, surround
DAC, LFE DAC, reserved 5 pcm0: sndbuf_setmap 64b000, 1000; 0xc4037000
-> 64b000 pcm0: sndbuf_setmap 75d000, 1000; 0xc4089000 -> 75d000
pcm0: sndbuf_setmap 6db000, 1000; 0xc4087000 -> 6db000
pcm0: sndbuf_setmap 6d9000, 1000; 0xc4085000 -> 6d9000
pcm0: sndbuf_setmap 6d6000, 1000; 0xc4082000 -> 6d6000
pcm0: sndbuf_setmap 6b3000, 1000; 0xc407f000 -> 6b3000
rl1: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem
0xe2002000-0xe20020ff irq 10 at device 19.0 on pci0 rl1: Realtek 8139B
detected. Warning, this may be unstable in autoselect mode rl1:
Ethernet address: 00:0d:61:14:c8:17 miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
pci0: <serial bus, FireWire> at device 20.0 (no driver attached)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes
threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1041 0x1051 0x1041 0x1041
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1041 0x1049 0x1041 0x1041
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=04
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled,
default to deny, logging limited to 100 packets/entry by default lo0:
bpf attached acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently
100.0% ad0: <ST3120023A/3.33> ATA-6 disk at ata0-master
ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, PIO4
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=-1 dmaflag=1
acd0: <SONY CD-RW CRX1611/TYS7> CD-RW drive at ata1 as master
acd0: read 6890KB/s (36026KB/s) write 2755KB/s (2755KB/s), 2048KB
buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:61432497
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:61432560
l:173003985[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 31453438464 end 31453470719
GEOM: Configure ad0s2, start 31453470720 length 88578040320 end
120031511039 GEOM: Configure ad0s2a, start 0 length 268435456 end
268435455 GEOM: Configure ad0s2b, start 268435456 length 2147483648
end 2415919103 GEOM: Configure ad0s2c, start 0 length 88578040320 end
88578040319 GEOM: Configure ad0s2d, start 2415919104 length 536870912
end 2952790015 GEOM: Configure ad0s2e, start 2952790016 length
536870912 end 3489660927 GEOM: Configure ad0s2f, start 3489660928
length 53687091200 end 57176752127 GEOM: Configure ad0s2g, start
57176752128 length 31401288192 end 88578040319(probe3:ata1:0:1:0): CAM
Status 0x39(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): CAM Status 0x39
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): error 5
(probe3:ata1:0:1:0): Retries Exhausted
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): CAM Status 0x39
(probe0:ata0:0:0:0): Retrying Command
(probe1:ata0:0:1:0): CAM Status 0x39
(probe1:ata0:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 5
(probe0:ata0:0:0:0): Retries Exhausted
(probe1:ata0:0:1:0): error 5
(probe1:ata0:0:1:0): Retries Exhausted
pass0 at ata1 bus 0 target 0 lun 0
pass0: <SONY CD-RW CRX1611 TYS7> Removable CD-ROM SCSI-0 device 
pass0: Serial Number \^_
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY CD-RW CRX1611 TYS7> Removable CD-ROM SCSI-0 device 
cd0: Serial Number \^_
cd0: 16.000MB/s transfers
cd0: cd present [320790 x 2048 byte records]
start_init: trying /sbin/init

************************


agp0@pci0:0:0:	class=0x060000 card=0x50001458 chip=0x31891106 rev=0x80
hdr=0x00    vendor   = 'VIA Technologies Inc'
    device   = 'VT8377 Apollo KT400 CPU to PCI Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:	class=0x060400 card=0x00000080 chip=0xb1981106
rev=0x00 hdr=0x01    vendor   = 'VIA Technologies Inc'
    device   = 'ProSavageDDR P4X600 CPU to AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
rl0@pci0:13:0:	class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
hdr=0x00    vendor   = 'Realtek Semiconductor'
    device   = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter'
    class    = network
    subclass = ethernet
none0@pci0:15:0:	class=0x01018a card=0x50021458 chip=0x05711106
rev=0x06 hdr=0x00    vendor   = 'VIA Technologies Inc'
    device   = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
    class    = mass storage
    subclass = ATA
isab0@pci0:17:0:	class=0x060100 card=0x50011458 chip=0x32271106
rev=0x00 hdr=0x00    vendor   = 'VIA Technologies Inc'
    class    = bridge
    subclass = PCI-ISA
pcm0@pci0:17:5:	class=0x040100 card=0xa0021458 chip=0x30591106
rev=0x60 hdr=0x00    vendor   = 'VIA Technologies Inc'
    device   = 'VT8233/33A AC97 Enhanced Audio Controller'
    class    = multimedia
    subclass = audio
rl1@pci0:19:0:	class=0x020000 card=0xe0001458 chip=0x813910ec rev=0x10
hdr=0x00    vendor   = 'Realtek Semiconductor'
    device   = 'RT8139 (A/B/C/8130) Fast Ethernet Adapter'
    class    = network
    subclass = ethernet
none1@pci0:20:0:	class=0x0c0010 card=0x10001458 chip=0x30441106
rev=0x46 hdr=0x00    vendor   = 'VIA Technologies Inc'
    device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer
Controller'    class    = serial bus
    subclass = FireWire
drm0@pci1:0:0:	class=0x030000 card=0x40101458 chip=0x49661002 rev=0x01
hdr=0x00    vendor   = 'ATI Technologies'
    device   = 'RV250 Radeon 9000/9000 Pro'
    class    = display
    subclass = VGA


*****************


ATA channel 0, Master, device ad0:

ATA/ATAPI revision    6
device model          ST3120023A
serial number         3KA0DF3C
firmware revision     3.33
cylinders             16383
heads                 16
sectors/track         63
lba supported         234441648 sectors
lba48 not supported         234441648 sectors
dma supported
overlap not supported

Feature                      Support  Enable    Value   Vendor
write cache                    yes	yes
read ahead                     yes	yes
dma queued                     no	no	0/00
SMART                          yes	no
microcode download             yes	yes
security                       yes	no
power management               yes	yes
advanced power management      no	no	65278/FEFE
automatic acoustic management  yes	yes	128/80	128/80




-- 
IOnut
FreeBSD unregistered ;) user



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031017201604.58b0ff0d.itetcu>