Date: Thu, 6 Mar 2003 23:08:37 +0100 (CET) From: Robert Eckardt <Robert.Eckardt@robert-eckardt.de> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/48986: 5.0-R/4.7R system hangs on HighPoint RAID w/ ata driver Message-ID: <200303062208.h26M8b100947@robert-eckardt.de>
next in thread | raw e-mail | index | archive | help
>Number: 48986 >Category: kern >Synopsis: 5.0-R/4.7R system hangs on HighPoint RAID w/ ata driver >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Mar 06 14:10:07 PST 2003 >Closed-Date: >Last-Modified: >Originator: Robert Eckardt >Release: FreeBSD 5.0-RELEASE i386 >Organization: Home >Environment: System: FreeBSD quasar 5.0-RELEASE GENERIC-kernel EPoX EP-4GEA+ board with IntelCeleron 2.0GHz using i845GE chipset and AwardBIOS v6.00PG (12/04/2002 for Intel 845GE chipset) with HighPoint HPT372 UDMA/ATA133 on-board RAID-controller (BIOS v2.32) and 2 IBM DTLA-307075 HDDs as RAID-1 attached to it. >Description: FreeBSD's ATA-driver recogizes the RAID-controller and can start installation. Controlling the RAID with atacontrol (in the emergency shell) works. On unpacking the distributions the system hangs (not always at the same point). ### This is also valid for 4.7-RELEASE. ### >How-To-Repeat: Install 4.7-RELEASE or 5.0-RELEASE on platform with EP-4GEA+ mainboard and a RAID attached to the HighPoint controller and produce heavy disk I/O. >Fix: HighPoint (www.highpoint-tech.com) provides kernel modules for FreeBSD 4.{1,3,4,5,6.2,7}-RELEASE for controller BIOS v2.34, which works fine (even with BIOS v2.32). RAID is attached as SCSI device da: pci1: <PCI bus> on pcib1 hpt37x20: <HPT372 UDMA/ATA133 RAID Controller> port 0xa000-0xa0ff,0x9c00-0x9c03,0x9800-0x9807,0x9400-0x9403,0x9000-0x9007 irq 11 at device 0.0 on pci1 [...] Device Driver for HPT37x2 ATA RAID Controller Version 1.31 [...] Waiting 5 seconds for SCSI devices to settle da0 at hpt37x20 bus 0 target 0 lun 0 da0: <HPT Inc. HPT37x2 RAID 1 1.05> Fixed Direct Access SCSI-2 device da0: 73308MB (150136560 512 byte sectors: 255H 63S/T 9345C) Though, for 5.0-RELEASE no workaround known. >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303062208.h26M8b100947>