Date: Wed, 9 Jan 2002 15:35:35 -0600 From: Marius Strom <marius@marius.org> To: "M. Warner Losh" <imp@village.org> Cc: freebsd@samurai.deec.uc.pt, stable@FreeBSD.ORG, paulo@isr.uc.pt Subject: Re: Can't boot FreeBSD on a Toshiba Laptop Message-ID: <20020109213535.GL64900@marius.org> In-Reply-To: <20020109.115326.99747006.imp@village.org> References: <Pine.BSF.4.21.0201091439420.782-300000@samurai.deec.uc.pt> <20020109.115326.99747006.imp@village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Warner (et al),
Unfortunately, still doesn't work.
Last few lines of boot:
pci2: <unknown card> (vendor=0x1179, dev=0x0804) at 6.0 irq 5
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 10
It hard locks at that point. If I can provide any information obtainable
from another OS on the machine (it boots linux, winxp) let me know (I can
also dig in and find exactly what components are where).
Here's what I do know:
Video card in the system is a GeForce 2 Go (their mobile GeFoce).
RealTek chipset is detected
USB is detected
pcic stuff (TI PCI-1420 PCI-CardBus Bridge) is detected. Config Reg:
[speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
According to WinXP, the PCI device on IRQ10 is a Intel 82801CA/CAM SMBus
Controller - 2483. WinXP shows nothing on IRQ5.
IRQ3 is the SMC IrCC Infrared port. Anyway to make FreeBSD think of this
as a serial interface to do debug kernels?
IRQ9 is shared between the Realtek Card, Crystal WDM Audi card, GeForce2,
USB controller, TI IEEE1394 controller, TI PCMCIA controller, Toshiba AMR
Software Modem, and Toshiba SM Host Controller.
Again, if you need any more info, let me know and I'll see what I can dig
up. I know I'd be very interested in seeing FreeBSD supported on this
laptop.
On Wed, Jan 09, 2002 at 11:53:26AM -0700, M. Warner Losh wrote:
> OK. This is a longshot (since you said that 4.3 also failed), but can
> you try a 4.4 or newer kernel and in the boot loader say:
> hw.pcic.intr_path=1
> hw.pcic.irq=0
> Warner
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
--
/------------------------------------------------->
Marius Strom | Always carry a short length of fibre-optic cable.
Professional Geek | If you get lost, then you can drop it on the
System/Network Admin | ground, wait 10 minutes, and ask the backhoe
http://www.marius.org/ | operator how to get back to civilization.
\-------------| Alan Frame |---------------------->
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020109213535.GL64900>