Date: Sun, 14 Jan 2001 12:28:45 +0300 From: Odhiambo Washington <wash@iconnect.co.ke> To: FBSD-STABLE <freebsd-stable@freebsd.org> Cc: FBSD-Q <freebsd-questions@freebsd.org> Subject: Strange device probe behavior Message-ID: <20010114122845.A400@poeza.iconnect.co.ke>
next in thread | raw e-mail | index | archive | help
I accepted all types of flaming on this - the answer in most important.
Below I attach the output of dmesg:
This HP Netserver E60 box was running 3.5-STABLE. A few days back I
decided to push it to 4.2-STABLE. Now some strange device (not quite
strange though) takes the kernel about 15 seconds to probe, just as it
leaves the for SCSI devices to settle..hmmm..I never saw this with
3.5-STABLE, so I was just wondering if maybe I missed some option when I
compiled my 4.x kernel...
I have indicated using ^^^^^ the device that scares my life....
Thanks in advance.
### DMESG OUTPUT ##
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #0: Sat Jan 13 14:05:06 EAT 2001
root@poeza.iconnect.co.ke:/usr/obj/usr/src/sys/KERN4.x
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 67043328 (65472K bytes)
avail memory = 61755392 (60308K bytes)
Preloaded elf kernel "kernel" at 0xc0369000.
VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc0306962 (1000022)
VESA: ATI MACH64
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1860-0x186f at device 4.1 on pci0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is where 15 or so seconds lapse before the probe continues!!
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1840-0x185f irq 11 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x1000-0x10ff mem 0xfc100000-0xfc100fff irq 10 at device 5.0 on pci0
ahc0: Using left over BIOS settings
aic7895C: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x1400-0x14ff mem 0xfc101000-0xfc101fff irq 10 at device 5.1 on pci0
ahc1: Host Adapter Bios disabled. Using default SCSI device parameters
aic7895C: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1800-0x183f mem 0xfc000000-0xfc0fffff,0xfc102000-0xfc102fff irq 11 at device 6.0 on pci0
fxp0: Ethernet address 00:e0:18:c2:61:69
pcib2: <DEC 21152 PCI-PCI bridge> at device 12.0 on pci0
pci2: <PCI bus> on pcib2
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <HITACHI CDR-8435> at ata0-master using WDMA2
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <HP T20 3.01> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
da1 at ahc0 bus 0 target 2 lun 0
da1: <COMPAQ BB009222B5 B016> Fixed Direct Access SCSI-2 device
da1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 64H 32S/T 8678C)
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <HP 9.10GB A 68-SA40 SA40> Fixed Direct Access SCSI-2 device
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 64H 32S/T 8678C)
#######################
-Wash
--
Odhiambo Washington Inter-Connect Ltd.,
wash@iconnect.co.ke 5th Flr Furaha Plaza
Tel: 254 11 222604 Nkrumah Rd.,
Fax: 254 11 222636 PO Box 83613 MOMBASA, KE.
What the caterpillar calls the end of the world, the master calls a butterfly.
-Richard Bach
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010114122845.A400>