Date: Fri, 02 Feb 2007 23:33:22 +0900 From: NISHIMURA Yutaka <forml@aypio.net> To: freebsd-stable@freebsd.org Subject: RE: 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) Message-ID: <20070202225114.DEE5.FORML@aypio.net>
next in thread | raw e-mail | index | archive | help
Hello. This is Yutaka. I am unskilled using english. If you don't understand my english , please teach for me. I came from FreeBSD-users-jp (Japanese mailing-list) which has been guidanced. http://home.jp.freebsd.org/cgi-bin/showmail/FreeBSD-users-jp/90318 This thired. > 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) Mike Andrews > * 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) Jack Vogel > o 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) Mike Andrews > o 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) Jeremy Chadwick > + 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) Jack Vogel > # 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) John Baldwin > o 6.2-RELEASE em0 watchdog timeouts -- sometimes (w/ partial workaround) Mike Andrews I know this phenomenon. My environment generate it. Changed setting with problem has improved. I was setting disable USB in BIOS. Having been generated problem by 3 times after reboot. however, no-problem last 3 days. enable USB, this problem 4-10 times per hour. disable USB, this problem 3 times after reboot. # pciconf -l -v em0@pci0:8:0: class=0x020000 card=0x002e8086 chip=0x100e8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82540EM Gigabit Ethernet Controller' class = network subclass = ethernet disable USB, dmesg.boot log. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Sat Jan 20 12:12:56 JST 2007 root@example.net:/usr/src/sys/i386/compile/NATBOX ACPI APIC Table: <AMIINT VIA_K7 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Sempron(tm) (1403.19-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow> real memory = 805240832 (767 MB) avail memory = 774430720 (738 MB) ioapic0 <Version 0.3> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <AMIINT VIA_K7> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci0: <display, VGA> at device 5.0 (no driver attached) atapci0: <Promise PDC40518 SATA150 controller> port 0xec00-0xec7f,0xe800-0xe8ff mem 0xdfffb000-0xdfffbfff,0xdffc0000-0xdffdffff irq 17 at device 6.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xe400-0xe43f mem 0xdff80000-0xdff9ffff,0xdff60000-0xdff7ffff irq 18 at device 8.0 on pci0 em0: Ethernet address: 00:07:e9:xx:x:xx xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xdfffaf80-0xdfffafff irq 17 at device 10.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:xx:xx:xx atapci1: <VIA 6420 SATA150 controller> port 0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc0f,0xc800-0xc8ff irq 20 at device 15.0 on pci0 ata6: <ATA channel 0> on atapci1 ata7: <ATA channel 1> on atapci1 atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at device 17.5 (no driver attached) acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff,0xcd000-0xce7ff,0xe0000-0xe0fff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Thank you. -- NISHIMURA,Yutaka. <forml@aypio.net>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070202225114.DEE5.FORML>