Date: Mon, 22 Apr 2002 21:42:00 -0700 (PDT) From: sonam singh <sonamsinghl@yahoo.com> To: mobile@freebsd.org Subject: Help Config Sound in Dell Inspiron 4100 Message-ID: <20020423044200.98496.qmail@web14402.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi I successfuly installed the FreeBSD4.5 on it and X-windows with Kde2 on Dell Inspiron 4100 Laptop .but i am not able to configure the modem and sound card .It has PCtel Modem & Crystal 4205 Sound card .Can any body tell how to configure the Sound and Modem . here is output of dmesg. i also try same thing which u mentioned . I recompile the kernle with device pcm device csa Bye Sonam The Output Of dmesg:...... Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Sun Apr 7 10:49:54 IST 2002 root@sonamsingh.com:/usr/src/sys/compile/SON_KER2_1 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (863.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134094848 (130952K bytes) config> di sn0 config> di lnc0 config> di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> q avail memory = 125517824 (122576K bytes) Preloaded elf kernel "kernel" at 0xc04e1000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc04e109c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00fbba0 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11 uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: (New UHCI DeviceId=0x24828086) usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: (0x24828086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 1.1 on pci2 pcic1: PCI Memory allocated: 0x44001000 pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq] pccard1: <PC Card bus (classic)> on pcic1 isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <Intel 82801CA (ICH3)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0 pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11 orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pccard: card inserted, slot 0 pccard: card removed, slot 0 pcic0: Card type 32-bit cardbus is unsupported ad0: 19077MB <IC25N020ATDA04-0> [38760/16/63] at ata0-master UDMA100 acd0: CDROM <LG CD-ROM CRN-8245B> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s2a __________________________________________________ Do You Yahoo!? Yahoo! Games - play chess, backgammon, pool and more http://games.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020423044200.98496.qmail>