Date: Thu, 22 Dec 2005 02:22:21 +0100 From: Gianmarco Giovannelli <gmarco@giovannelli.it> To: stable@freebsd.org Cc: rizzo@icir.org, ame@yourbox.net Subject: Re: i915drm Message-ID: <7.0.0.16.2.20051222021454.026740f0@gimbo.org> In-Reply-To: <43A94265.2010308@iteranet.com> References: <200512192029.jBJKTtDx055502@lurza.secnetix.de> <43A74DBA.3000609@tvnetwork.hu> <43A7ACEC.50605@iteranet.com> <7.0.0.16.2.20051220090629.04ba99e8@gimbo.org> <43A7D3E6.608@iteranet.com> <43A88C31.9070302@tvnetwork.hu> <7.0.0.16.2.20051221062911.05507d90@gimbo.org> <43A91FC7.8090808@iteranet.com> <43A94265.2010308@iteranet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
At 12.54 21/12/2005, you wrote: >Hi. > >Alexey Popov wrote: >>> >>>>>> > error: [drm:pid0:drm_load] *ERROR* Card isn't AGP, or couldn't >>> >>>> i915 DRM is not fully supported in -stable. You may try 7-current or >>> >>>> this hack: ftp://213.85.11.250/pub/drm3.patch . >>> >>> I have applied the patch et voila' :-) >>> >>> drmsub0: <Intel i915GM>: (child of agp_i810.c) on agp0 >>> >>> info: [drm] AGP at 0xb0080000 0MB >Not sure, but I think "0MB" here is weird. > >Full output (from Gianmarco): >pci0: <ACPI PCI bus> on pcib0 >agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port >0x1800-0x1807 mem >0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff >irq 16 at device 2.0 on pci0 >agp0: detected 7932k stolen memory >agp0: aperture size is 256M >drmsub0: <Intel i915GM>: (child of agp_i810.c) on agp0 >info: [drm] AGP at 0xb0080000 0MB >info: [drm] Initialized i915 1.2.0 20041217 >pci0: <display> at device 2.1 (no driver attached) > >Aperture size 256MB should be printed here instead of 0MB. There is >three different i915gm with this bug reported: >http://freebsd.rambler.ru/bsdmail/freebsd-stable_curr/msg00003.html >I think this bug is i915gm only, but have no hardware to dig in. I reply also in this list for the people not subscribed to the x11 list :-) It seems to me that also Oliver has the same bug (0M) on his 915GM ... Any other with with centrino based 915 card can confirm this ? If someone need a tester to fix it I am ready to help. Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://utenti.gufi.org/~gmarco/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7.0.0.16.2.20051222021454.026740f0>