Date: Sun, 5 Apr 2015 14:42:22 -0700 From: Adrian Chadd <adrian@freebsd.org> To: Lev Serebryakov <lev@freebsd.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: wpi problems with latest CURRENT: my old laptop air-gapped :) Message-ID: <CAJ-Vmo=tFpAMDCO8hmCFKfz-akRqm2d2wOG-AiH_OWU_yo4DXg@mail.gmail.com> In-Reply-To: <1121070252.20150406001819@serebryakov.spb.ru> References: <1121070252.20150406001819@serebryakov.spb.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi! There's been a whole bunch of work lately on wpi. are you able to revert just sys/dev/wpi/ and see if you can find where the problem occured? You should be able to just build wpi: * comment it out of your config file * then build/use it as a module * .. and you can build just it: make buildkernel KERNCONF=X MODULES_OVERRIDE="wpi" NO_CLEAN=1 make reinstallkernel KERNCONF=X MODULES_OVERRIDE="wpi" I'll see about digging out a wpi NIC and trying it again; maybe the most recent commits did break something. Thanks for reporting this problem! -adrian On 5 April 2015 at 14:18, Lev Serebryakov <lev@freebsd.org> wrote: > Hello Freebsd-wireless, > > > I have old Sony Vaio with wpi WiFi card: > > wpi0@pci0:6:0:0: class=0x028000 card=0x10508086 chip=0x42228086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = 'PRO/Wireless 3945ABG [Golan] Network Connection' > class = network > > > It worked with -CURRENT from ~ Nov 2014 (it complained about callbacks, but > worked rather well!) but after update to r281061, it stops to work. > > Driver (and wpa_supplicant!) complains to console several times per second: > > ... > Apr 6 00:00:13 labrat kernel: wpi0: wpi_send_rxon: could not set TX power, error 35 > Apr 6 00:00:13 labrat kernel: wpi0: wpi_config: could not send RXON > Apr 6 00:00:13 labrat kernel: wpi0: wpi_init: could not configure device, error 35 > Apr 6 00:00:13 labrat kernel: wpi0: could not add broadcast node, error 35 > Apr 6 00:00:13 labrat kernel: wpi0: wpi_config: could not send RXON > Apr 6 00:00:13 labrat kernel: wpi0: wpi_init: could not configure device, error 35 > Apr 6 00:00:13 labrat kernel: wpi0: fatal firmware error > Apr 6 00:00:13 labrat kernel: firmware error log (count = 1): > Apr 6 00:00:13 labrat kernel: error type = "SYSASSERT" (0x00000005) > Apr 6 00:00:13 labrat kernel: error data = 0x000004F3 > Apr 6 00:00:13 labrat kernel: branch link = 0x000008B600001F8A > Apr 6 00:00:13 labrat kernel: interrupt link = 0x0000032000000000 > Apr 6 00:00:13 labrat kernel: time = 107 > Apr 6 00:00:13 labrat kernel: driver status: > Apr 6 00:00:13 labrat kernel: tx ring 0: qid=0 cur=0 queued=0 > Apr 6 00:00:13 labrat kernel: tx ring 1: qid=1 cur=0 queued=0 > Apr 6 00:00:13 labrat kernel: tx ring 2: qid=2 cur=0 queued=0 > Apr 6 00:00:13 labrat kernel: tx ring 3: qid=3 cur=0 queued=0 > Apr 6 00:00:13 labrat kernel: tx ring 4: qid=4 cur=10 queued=0 > Apr 6 00:00:13 labrat kernel: rx ring: cur=10 > Apr 6 00:00:13 labrat wpa_supplicant[1186]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Device not configured > Apr 6 00:00:13 labrat wpa_supplicant[1186]: wlan0: Failed to initiate AP scan > Apr 6 00:00:14 labrat kernel: wpi0: wpi_send_rxon: could not set TX power, error 35 > ... > > This laptop is really old (SATA1 disk, first-gen Core2Duo CPU, 2GB of RAM) > so re-building system takes hours :( > > But I could provide additional debug information. > > -- > Best regards, > Lev mailto:lev@FreeBSD.org > > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=tFpAMDCO8hmCFKfz-akRqm2d2wOG-AiH_OWU_yo4DXg>