Date: Thu, 28 Oct 1999 00:06:49 +0200 (CEST) From: Wilko Bulte <wilko@yedi.iaf.nl> To: gallatin@cs.duke.edu (Andrew Gallatin) Cc: freebsd-alpha@FreeBSD.ORG Subject: Re: Mach64-svga on FreeBSD/alpha Message-ID: <199910272206.AAA67502@yedi.iaf.nl> In-Reply-To: <14358.8254.334980.730088@grasshopper.cs.duke.edu> from Andrew Gallatin at "Oct 26, 1999 5:44:22 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
As Andrew Gallatin wrote ... > > Wilko Bulte writes: > <..> > > (--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. > > (**) FontPath set to > > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/ > > isc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/: > > nscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X > > 1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > > > > >>>>>> (--) Mach64: PCI: Mach64 CX rev 1, Aperture @ 0x81000000, Sparse I/O @ > > 0x02ec > > > > *** None of the configured devices were detected.*** > > > > Fatal server error: > > no screens found > > I'm especially puzzled by the line marked with >>>> > > The card is an ATI WinTurbo which was OK in my Intel box. > > Perhaps your mode lines are overly aggressive? Is this the same > config file you used on the Intel box? > Does it say anything between the line about Aperture @ 0x81000000 & > the no screens found line? No, it does not. Which is a bit !verbose to me to be honest. Does the aperture line give any useful info? It does not to me, but.. ;-) Wilko -- | / o / / _ Arnhem, The Netherlands - Powered by FreeBSD - |/|/ / / /( (_) Bulte WWW : http://www.tcja.nl http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910272206.AAA67502>