Date: Thu, 01 Mar 2001 11:15:45 -0500 From: Mike Tancsa <mike@sentex.net> To: "Bosko Milekic" <bmilekic@technokratis.com>, <stable@FreeBSD.ORG> Cc: jlemon@flugsvamp.com Subject: Re: Continued panics on a recent STABLE machine Message-ID: <4.2.2.20010301111226.01de4650@marble.sentex.net> In-Reply-To: <4.2.2.20010301085733.03cbd608@marble.sentex.net> References: <01a101c0a1ea$77a64b20$becbca18@jehovah> <4.2.2.20010228114855.03d28be0@marble.sentex.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is with a new computer... Just swapped in the old hard drive and the
NIC. I am going to try a new NIC now to try and eliminate that as a
variable. The box also has a BX chipset instead of the GX.
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xe3c0ca00
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc02122d4
stack pointer = 0x10:0xd29e7be4
frame pointer = 0x10:0xd29e7bf4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 10450 (sendmail)
interrupt mask = net tty
kernel: type 12 trap, code=0
Stopped at fxp_add_rfabuf+0x13c: movl 0(%edx),%eax
db>
db> trace
fxp_add_rfabuf(c1506800,c0e2c900) at fxp_add_rfabuf+0x13c
fxp_intr(c1506800,660800,c1667f00,c163e44c,d29e7cec) at fxp_intr+0x11d
intr_mux(c0d7f820,620000,d29e0010,c01b0010,d0960010) at intr_mux+0x1d
Xresume11() at Xresume11+0x2b
--- interrupt, eip = 0xc01acb1b, esp = 0xd29e7c78, ebp = 0xd29e7cec ---
ip_fw_chk(d29e7d48,14,c1506800,d29e7d4e,d29e7d50) at ip_fw_chk+0x2bf
ip_output(c0df9a00,0,d096f8c8,0,0) at ip_output+0x458
tcp_output(d096f940,0,c0da8000,d05b9000,0) at tcp_output+0xda8
tcp_usr_send(d05b9000,4,c0da8000,0,0) at tcp_usr_send+0x14a
sosend(d05b9000,0,d29e7ed8,c0da8000,0) at sosend+0x5df
soo_write(c16e0080,d29e7ed8,c165dd80,0,d0c4bd80) at soo_write+0x24
dofilewrite(d0c4bd80,c16e0080,4,80fc000,4470) at dofilewrite+0xbd
write(d0c4bd80,d29e7f80,28248968,2825a780,80fc000) at write+0x36
syscall2(2f,2f,bfbf002f,80fc000,2825a780) at syscall2+0x1f1
Xint0x80_syscall() at Xint0x80_syscall+0x25
db> call cpu_reset()
At 08:59 AM 3/1/2001 -0500, Mike Tancsa wrote:
>Another panic this AM. It does seem to be load / traffic related, as the
>box makes it through the night when there is less data going through it.
>
>
>Fatal trap 12: page fault while in kernel mode
>fault virtual address = 0xa5c0482c
>fault code = supervisor read, page not present
>instruction pointer = 0x8:0xc0211ecd
>stack pointer = 0x10:0xc02d08e0
>frame pointer = 0x10:0xc02d08f4
>code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
>processor eflags = interrupt enabled, resume, IOPL = 0
>current process = Idle
>interrupt mask =
>kernel: type 12 trap, code=0
>Stopped at fxp_intr+0xf9: movl 0x2c(%ebx),%eax
>db> trace
>fxp_intr(c11bb800,660400,0,0,0) at fxp_intr+0xf9
>intr_mux(c0a34820,0,10,400010,ffff0010) at intr_mux+0x1d
>Xresume10() at Xresume10+0x2b
>--- interrupt, eip = 0xc02802f6, esp = 0xc02d0954, ebp = 0 ---
>default_halt() at default_halt+0x2
>db>
>
>At 07:56 PM 2/28/2001 -0500, Bosko Milekic wrote:
>>Eurgh.
>>
>>Not the first time I see this, and not from one source. Recent
>>complaints have come in about the exact same problem only for
>>RELENG_4.
>>
>>Please try: http://people.freebsd.org/~bmilekic/code/bogus_mb.diff
>>
>>And try your best to reproduce.
>>
>>Regards,
>>Bosko.
>>
>>Mike Tancsa wrote:
>>
>>
>> >
>> > Not sure if its hardware, but the panics seem to be in the same
>>location
>> > each time. At first I thought it might be IPSEC, but I got rid of
>>that.
>> >
>> >
>> > db> trace
>> > m_copym(c0ad3300,3908,5b4,1,ccf5e0c0) at m_copym+0x13c
>> > tcp_output(ccf5e0c0,0,c0ad3300,cca2fcc0,0) at tcp_output+0x838
>> > tcp_usr_send(cca2fcc0,4,c0ad3300,0,0) at tcp_usr_send+0x14a
>> > sosend(cca2fcc0,0,ceb06ed8,c0ad3300,0) at sosend+0x5df
>> > soo_write(c1bc80c0,ceb06ed8,c158ea00,0,ce5aeba0) at soo_write+0x24
>> > dofilewrite(ce5aeba0,c1bc80c0,4,80fc000,4470) at dofilewrite+0xbd
>> > write(ce5aeba0,ceb06f80,28248928,2825a740,80fc000) at write+0x36
>> > syscall2(2f,2f,2f,80fc000,2825a740) at syscall2+0x1f1
>> > Xint0x80_syscall() at Xint0x80_syscall+0x25
>> >
>> > Fatal trap 12: page fault while in kernel mode
>> > fault virtual address = 0xadc0fa00
>> > fault code = supervisor read, page not present
>> > instruction pointer = 0x8:0xc017b078
>> > stack pointer = 0x10:0xceb06d4c
>> > frame pointer = 0x10:0xceb06d68
>> > code segment = base 0x0, limit 0xfffff, type 0x1b
>> > = DPL 0, pres 1, def32 1, gran 1
>> > processor eflags = interrupt enabled, resume, IOPL = 0
>> > current process = 7625 (sendmail)
>> > interrupt mask = net tty
>> > kernel: type 12 trap, code=0
>> > Stopped at m_copym+0x13c: movl 0(%edx),%eax
>> >
>> >
>> >
>> > Fatal trap 12: page fault while in kernel mode
>> > fault virtual address = 0xacc06400
>> > fault code = supervisor read, page not present
>> > instruction pointer = 0x8:0xc01b7c8c
>> > stack pointer = 0x10:0xce639dc0
>> > frame pointer = 0x10:0xce639e34
>> > code segment = base 0x0, limit 0xfffff, type 0x1b
>> > = DPL 0, pres 1, def32 1, gran 1
>> > processor eflags = interrupt enabled, resume, IOPL = 0
>> > current process = 32323 (cc1)
>> > interrupt mask = net tty
>> > kernel: type 12 trap, code=0
>> > Stopped at tcp_output+0x658: movl 0(%edx),%eax
>> > db> trace
>> > tcp_output(ccf5f2e0,0,c0a74020,ffff0000,0) at tcp_output+0x658
>> > tcp_input(c0ab5a00,14,6,c0ab5a00,400400) at tcp_input+0x2233
>> > ip_input(c0ab5a00) at ip_input+0x7fb
>> > ipintr(c0276c80,400400,c0289a2a,c028953b,400400) at ipintr+0x4b
>> > swi_net_next(c0a34820,0,2f,2f,2f) at swi_net_next
>> > Xresume10() at Xresume10+0x2b
>> > --- interrupt, eip = 0x8076319, esp = 0xce639fe0, ebp =
>>0xbfbfe7c0 ---
>> > db>
>> >
>> >
>> > FreeBSD 4.2-STABLE #3: Tue Feb 27 21:16:15 EST 2001
>> > Timecounter "i8254" frequency 1193182 Hz
>> > CPU: Pentium II/Pentium II Xeon/Celeron (448.62-MHz 686-class CPU)
>> > Origin = "GenuineIntel" Id = 0x653 Stepping = 3
>> >
>>Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
>>E,M
>> >
>>Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
>>E,MCA,
>> > CMOV,PAT,PSE36,MMX,FXSR>
>> > real memory = 268427264 (262136K bytes)
>> > avail memory = 257769472 (251728K bytes)
>> > Preloaded elf kernel "kernel" at 0xc036a000.
>> > Pentium Pro MTRR support enabled
>> > npx0: <math processor> on motherboard
>> > npx0: INT 16 interface
>> > pcib0: <Intel 82443GX host to PCI bridge> on motherboard
>> > pci0: <PCI bus> on pcib0
>> > pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0
>>on pci0
>> > pci1: <PCI bus> on pcib2
>> > pci1: <VGA-compatible display device> at 0.0 irq 5
>> > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
>> > isa0: <ISA bus> on isab0
>> > atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device
>>7.1 on
>> > pci0
>> > ata0: at 0x1f0 irq 14 on atapci0
>> > pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
>> > chip1: <Intel 82371AB Power management controller> port 0x850-0x85f
>>at
>> > device 7.3 on pci0
>> > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecdf mem
>> > 0xfe000000-0xfe0fffff,0xf6000000-0xf6000fff irq 10 at device 14.0 on
>>pci0
>> > fxp0: Ethernet address 00:a0:c9:d6:db:ba
>> > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem
>> > 0xfe100000-0xfe10007f irq 10 at device 17.0 on pci0
>> > xl0: Ethernet address: 00:c0:4f:68:13:88
>> > miibus0: <MII bus> on xl0
>> > xlphy0: <3Com internal media interface> on miibus0
>> > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> > pcib3: <DEC 21152 PCI-PCI bridge> at device 19.0 on pci0
>> > pci2: <PCI bus> on pcib3
>> > pcib1: <Intel 82443GX host to AGP bridge> on motherboard
>> > pci3: <PCI bus> on pcib1
>> > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
>>isa0
>> > fdc0: FIFO enabled, 8 bytes threshold
>> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>> > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>> > kbd0 at atkbd0
>> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> > psm0: model IntelliMouse, device ID 3
>> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
>>isa0
>> > sc0: <System console> at flags 0x100 on isa0
>> > sc0: VGA <16 virtual consoles, flags=0x100>
>> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>> > sio0: type 16550A, console
>> > sio1 at port 0x2f8-0x2ff irq 3 on isa0
>> > sio1: type 16550A
>> > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>> > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>> > ppc0: FIFO with 16/16/8 bytes threshold
>> > plip0: <PLIP network interface> on ppbus0
>> > lpt0: <Printer> on ppbus0
>> > lpt0: Interrupt-driven port
>> > ppi0: <Parallel I/O> on ppbus0
>> > DUMMYNET initialized (010124)
>> > IP packet filtering initialized, divert enabled, rule-based
>>forwarding
>> > enabled, default to deny, logging limited to 22100 packets/entry by
>>default
>> > IPv6 packet filtering initialized, logging limited to 1000
>>packets/entry
>> > ad0: 19473MB <Maxtor 52049H4> [39566/16/63] at ata0-master UDMA33
>> > Mounting root from ufs:/dev/ad0s1a
>> > WARNING: / was not properly dismounted
>> > --------------------------------------------------------------------
>> > Mike Tancsa, tel +1 519 651 3400
>> > Network Administration, mike@sentex.net
>> > Sentex Communications www.sentex.net
>> > Cambridge, Ontario Canada www.sentex.net/mike
>> >
>> >
>> > To Unsubscribe: send mail to majordomo@FreeBSD.org
>> > with "unsubscribe freebsd-stable" in the body of the message
>> >
>
>--------------------------------------------------------------------
>Mike Tancsa, tel +1 519 651 3400
>Network Administration, mike@sentex.net
>Sentex Communications www.sentex.net
>Cambridge, Ontario Canada www.sentex.net/mike
>
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-stable" in the body of the message
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Network Administration, mike@sentex.net
Sentex Communications www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.20010301111226.01de4650>