Date: Fri, 06 Mar 2015 16:55:56 -0800 From: "Chris H" <bsd-lists@bsdforge.com> To: freebsd-stable@freebsd.org, Piotr Kubaj <pkubaj@riseup.net> Subject: Re: No sound on 10.1-RELEASE Message-ID: <821bd8e3acb111667353737ec5c8eb5c@ultimatedns.net> In-Reply-To: <54FA3376.4020001@riseup.net> References: <54FA3376.4020001@riseup.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 07 Mar 2015 00:08:38 +0100 Piotr Kubaj <pkubaj@riseup.net> wrote > I've got MSI X99 motherboard and am using it with UEFI installation of > 10.1 (BIOS mode doesn't work with FreeBSD). At first, sound worked > properly (even in KDE), but now it doesn't. I'm not sure what happened, > since snd_hda is in kernel (I use GENERIC). I've checked all possible > values of hw.snd.default_unit and turned off KDE to check what happens > when doing cat /dev/random > /dev/dsp (it does nothing). > Attached below is dmesg and /dev/sndstat. > -----8<------- > Installed devices: > pcm0: <NVIDIA (0x0071) (HDMI/DP 8ch)> (play) > pcm1: <NVIDIA (0x0071) (HDMI/DP 8ch)> (play) > pcm2: <NVIDIA (0x0071) (HDMI/DP 8ch)> (play) > pcm3: <NVIDIA (0x0071) (HDMI/DP 8ch)> (play) > pcm4: <Realtek ALC892 (Rear Analog 5.1/2.0)> (play/rec) default > pcm5: <Realtek ALC892 (Front Analog)> (play/rec) > pcm6: <Realtek ALC892 (Rear Digital)> (play) > pcm7: <USB audio> (rec) Honestly, this could potentially go a lot of different directions; software/driver(s)/setup... It might be helpful to get the pinouts. The kernel (dmesg(8)) will provide it for you. You can see them by; loader.conf(5) adding the following to /boot/loader.conf: boot_verbose="YES" or by simply selecting boot verbose on the loader menu 6 --> boot verbose and then getting the results from dmesg(8) /var/run/dmesg.boot If everything looks as anticipated, you might check that your software is using the right sound system (OSS). I've had very good experiences on these sound systems by installing audio/xfce4-mixer doing so, always seems to get the correct settings for everything on these boards -- even if you never use the application. Because these boards can be so troublesome where sound is concerned; I used to have a script that would both check, as well as set everything up. But I can't seem to locate it ATM. HTH --Chris > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?821bd8e3acb111667353737ec5c8eb5c>