Date: Tue, 31 Jan 2006 11:52:01 +0300 From: Andrew Pantyukhin <infofarmer@gmail.com> To: gahn <ipfreak@yahoo.com> Cc: mpd <mpd-users@lists.sourceforge.net>, freebsd general questions <freebsd-questions@freebsd.org> Subject: Re: [Mpd-users] routing issue of mpd Message-ID: <cb5206420601310052h2ba50e2dqcd6f8fdd287e4f4a@mail.gmail.com> In-Reply-To: <20060131080026.90075.qmail@web52113.mail.yahoo.com> References: <20060131080026.90075.qmail@web52113.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 1/31/06, gahn <ipfreak@yahoo.com> wrote: > Hi: > > I got mpd working and logined into pptp server through > internet. From my pc, I can ping internal interface of > the pptp server, 192.168.128.1 (my pc address is > 192.168.128.10). the problem is that I can't ping > anything beyond that, such as 192.168.128.2 (it > actually is an interface of a router, on the same > subnet). > > From cmd of windows, with command "ipconfig": > > Ethernet adapter Local Area Connection: > > Connection-specific DNS Suffix . : > IP Address. . . . . . . . . . . . : > 254.254.254.100 > Subnet Mask . . . . . . . . . . . : > 255.255.255.0 > Default Gateway . . . . . . . . . : > 254.254.254.1 > > PPP adapter test: > > Connection-specific DNS Suffix . : > IP Address. . . . . . . . . . . . : > 192.168.128.10 > Subnet Mask . . . . . . . . . . . : > 255.255.255.255 > Default Gateway . . . . . . . . . : > > So how could I change the length of the masking of the > ppp adapter? > > once I can change the length of the masking bits, then > I can route my traffic into the rfc1918 networks that > behind of the vpn server. > > the manual page of: > > http://www.bretterklieber.com/mpd/doc3/mpd22.html > > don't seem to be matter though. > > here is the mpd.conf: > > default: > load pptp0 > > pptp0: > new -i ng0 pptp0 pptp0 > set ipcp ranges 192.168.128.1/21 > 192.168.128.10/21 > load common > > common: > set iface disable on-demand > set iface enable proxy-arp > set iface idle 1800 > set iface enable tcpmssfix > set bundle disable multilink > set bundle enable compression > set bundle yes crypt-reqd > set link no pap chap > set link enable chap-msv2 > set link keep-alive 10 60 > set link enable acfcomp protocomp > set ipcp yes vjcomp > set ipcp dns 192.168.64.96 > set ccp yes mppc > set ccp yes mpp-e128 > > BTW, mpd4 seems to be not very stable; I switched back > to 3.18 and it works fine. > > TIA > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log fi= les > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D103432&bid=3D230486&dat= =3D121642 > _______________________________________________ > Mpd-users mailing list > Mpd-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mpd-users > It would be strange if a ppp connection had a different subnet mask. You really should get into some reading on basic TCP/IP. What you need is to setup a route, something like this: route add 192.168.128/21 192.168.128.1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cb5206420601310052h2ba50e2dqcd6f8fdd287e4f4a>